Rig Welder

Texas Compression, LLC

Houston (TX)

Presencial

USD 65.000 - 95.000

Tempo integral

Há 2 dias
Seja uma das primeiras pessoas a se candidatar

Receba uma resposta desta empresa empregadora

Seu currículo e carta de apresentação personalizados exatamente para o que estão contratando.

Passe pelos filtros ATS

Benefícios oferecidos por esta vaga

Overtime opportunities
Per diem on qualifying projects
Travel opportunities within Texas
Advancement opportunities
Safety-focused work environment

Resumo da vaga

Texas Compression LLC is seeking experienced Rig Welders to support industrial construction, maintenance, and equipment installation projects across Texas. The role requires 5 years of vessel, tube, or pipe welding and fluency in English, with proficiency in P1 and P15E tests for 6G position.

Welders will perform routine assignments following defined processes, using GTAW, SMAW, GMAW, FCAW, plasma cutting and related tools.

Qualificações

  • Requires high school diploma or GED and fluency in English.
  • Experience reading P&IDs and blueprints; able to interpret weld procedures.
  • Minimum 5 years of vessel, tube and/or pipe welding.
  • Must pass P1 and P15E tests in 6G.
  • Able to travel within Texas for projects.

Responsabilidades

  • Follow HSE policies and procedures.
  • Obtain daily permits and complete JSA/JHA.
  • Read a tape measure and perform basic math calculations.
  • Operate welding machines and various welding processes (GTAW, SMAW, GMAW, FCAW).
  • Identify welding defects and perform self QC.
  • Maintain safe, clean work environment and comply with PPE requirements.
  • Collaborate with team and communicate effectively in emergencies.

Conhecimentos

Welding processes GTAW SMAW GMAW FCAW
Read a tape measure & basic math
Teamwork & communication
Heavy equipment operation (manlifts, 叉

Formação

High school diploma or GED
P1 and P15E tests (6G position)
TWIC credential
OSHA 10 or 30 (preferred)
Vessel, Tube and/or Pipe Welding experience

Descrição da vaga

Company: Texas Compression LLC

Location: Texas – Project-Based / Field Work

Employment Type: Full-Time

Travel: Required; primarily Texas industrial facilities

Industry: Industrial Construction, Maintenance & Equipment Installation

Position Summary

Texas Compression LLC is seeking experienced Rig Welders to support industrial construction, maintenance, and equipment installation projects throughout Texas.

This candidate should have extensive experience with P1, P4, P5A, P8 & P15E material.

Employee will be responsible for completing routine welding assignments with a clearly defined process.

Key Responsibilities
  • Follows all HSE policies and procedures.
  • Obtain daily permits and complete daily JSA/JHA.
  • Knowledge of basic rigging and lifting.
  • Read a tape measure and perform basic math calculations.
  • Capable of using different welding processes such as GTAW, SMAW, GMAW & FCAW.
  • Capable of using plasma cutter, torch and arc gouging.
  • Ability to identify welding defects and self QC.
  • Experience with hand, pneumatic and power tools.
  • Must be able to work with the team.
  • Capable of completing safety, production and quality control forms.
  • Capable of maintaining and operating welding machines.
  • Maintains safe and clean working environment by complying with procedures, rules, and regulations.
  • Requires operation of heavy equipment such as manlifts, forklifts or telehandlers on occasion.
  • Requires employees to use a computer, smart phone and other office equipment such as copiers and printers.
Education, Skills, And Experience
  • High school diploma or GED Required.
  • Must be fluent in English. (Speak, Read & Write).
  • Required to pass P1 and P15E tests in 6G position.
  • Minimum 5 year of Vessel, Tube and/or Pipe Welding.
  • Must have experience reading and understanding P&ID's & blueprints.
  • Must be capable of reading, interpreting and executing a weld procedure.
  • Requires employee to stand for at least 90% of the day.
  • Requires constant movement in different positions to accomplish tasks in various environments including confined spaces.
  • Must be able to lift 100 pounds.
  • Requires employee to frequently inspect equipment, climb stairs or ladders and must be able to maintain balance.
  • Must be able to communicate and respond to coworkers in the event of an emergency.
  • Requires work in outdoors and in all weather conditions.
  • Requires work in a non-climate- controlled facility.
  • Requires work in loud environments.
Requirements
  • Valid Drivers License
  • Clear Drug Screen, Clear Background Screen & Clear Driving Record
  • Basic+ & TWIC (Required) OSHA 10 or 30 (Preferred)
  • Position may require travel and employee may be required to drive their own vehicle.
  • Position requires employee must wear all required PPE, including fire-retardant clothing, hard hat, face shields, hearing protection, safety goggles, steel-toed boots, where applicable.
  • Duties are subject to change at any time according to the needs of the location or company. Other duties may be assigned, in addition to or in lieu of, those described above.
Safety Requirements
  • Follow Texas Compression LLC safety policies and procedures.
  • Follow all client and facility-specific safety requirements.
  • Participate in Job Safety Analyses (JSA/JHA), pre-job meetings, and toolbox talks.
  • Properly inspect and use tools, equipment, and rigging.
  • Maintain required PPE.
  • Stop work when an unsafe condition is identified.
  • Report hazards, incidents, near misses, and equipment deficiencies.
  • Maintain a clean and organized work area.
  • Never bypass safety procedures or required controls.
Work Environment

Work will primarily be performed at industrial and commercial construction sites throughout Texas.

Projects May Be Located At
  • Power generation facilities
  • Natural gas facilities
  • LNG facilities
  • Refineries
  • Petrochemical plants
  • Chemical plants
  • Industrial manufacturing facilities
  • Energy terminals
  • Compressor stations
  • Processing facilities
  • Other heavy industrial facilities

Employees should expect project-based work, varying schedules, overtime, weekends, shutdown/turnaround work, and travel depending on project requirements.

Compensation

Pay: Competitive Texas industrial market rate based on experience and qualifications.

Compensation May Be Structured Based On
  • Industrial experience
  • Certifications
  • Leadership responsibilities
  • Project requirements
  • Overtime: Available based on project schedule.
  • Per Diem: Available for qualifying projects requiring overnight travel, subject to company policy.
What We Offer
  • Competitive compensation
  • Overtime opportunities
  • Per diem on qualifying projects
  • Project-based travel opportunities
  • Opportunities for advancement
  • Industrial and energy-sector project experience
  • Safety-focused work environment
  • Opportunity to develop structural and mechanical installation skills
  • Potential advancement into Lead Hand, Foreman, or Field Supervisor positions
Career Advancement

Texas Compression LLC is looking for individuals who want to build a long-term career in industrial construction.

Employees who demonstrate strong leadership, technical knowledge, safety performance, and project execution skills will be considered for advancement.

Texas Compression LLC is an equal opportunity employer.

Obtenha sua revisão de currículo grátis e confidencial.

ou arraste e solte seu arquivo aqui.

Similar jobs

Vagas similares que valem a pena comparar

Skilled Industrial Laborers
Skilled Industrial Laborers

Texas Compression, LLC • Houston (TX)

Presencial
USD 21.000 - 34.000
Competitive compensation
Overtime opportunities
Per diem on qualifying projects
+2
Industrial Erector – Structural Steel & Equipment
Industrial Erector – Structural Steel & Equipment

Texas Compression, LLC • Houston (TX)

Presencial
USD 55.000 - 90.000
Competitive pay
Overtime opportunities
Per diem on qualifying projects
+4
Millwright/Reciprocating Compressor Mechanic
Millwright/Reciprocating Compressor Mechanic

Texas Compression, LLC • Houston (TX)

Presencial
USD 34.000 - 55.000
Overtime opportunities
Per diem on qualifying projects
Project-based travel opportunities
+1
Field Rig Welder – Travel, Overtime & Per Diem
Field Rig Welder – Travel, Overtime & Per Diem

Texas Compression, LLC • Houston (TX)

Presencial
USD 65.000 - 95.000
Overtime opportunities
Per diem on qualifying projects
Travel opportunities within Texas
+2
Pipeline Rig Welder - API 1104 Certified - Live Gas
Pipeline Rig Welder - API 1104 Certified - Live Gas

Southeast Connections LLC • Lebanon (TN)

Presencial
USD 55.000 - 75.000
Competitive salary
Career growth
Insurance benefits
+4
Rig Welder
Rig Welder

Eversandsons • Pecos (TX)

Presencial
USD 45.000 - 60.000
Competitive pay
Per diem
Travel opportunities
+1
Rig Welder
Rig Welder

Eversandsons • Lake Charles (LA)

Presencial
USD 65.000 - 90.000
Welder III
Welder III

Lewis Energy Group, LP • Texas

Presencial
USD 60.000 - 90.000
Medical/Dental/Vision
401K with match
Annual bonus
+5
Rigger
Rigger

Taurus Industrial Group • Freeport (TX)

Presencial
USD 52.000 - 76.000
Welder
Welder

ShalePro Energy Services, LLC • Pennsylvania

Presencial
USD 50.000 - 90.000