RF Geolocation & Direction Finding Engineer

Approach Venture

Tampa (FL)

On-site

USD 120,000 - 150,000

Full time

13 days ago

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Benefits offered by this job

Health/Dental/Vision
401(k) match
Unlimited PTO
Field demonstrations

Job summary

Approach Venture LLC is building a distributed RF sensing product and seeks a Senior RF Geolocation & Direction Finding Engineer to lead localization inside dense indoor facilities in Tampa, FL. You will own TDOA/FDOA techniques, multipath mitigation, and sensor fusion across multiple nodes, working with RF hardware and FPGA teams in an iterative development cycle.

Join a small, early-stage team delivering a V0 within 90 days.

Qualifications

  • BS or MS in Electrical Engineering, Applied Physics, Signal Processing, or a related field.
  • Hands-on experience with time/frequency difference-of-arrival localization on real receiver hardware.
  • Proven ability to solve multipath/non-line-of-sight in indoor/urban environments.
  • Experience validating localization with field measurements, not just simulations.
  • Strong knowledge of estimation theory, timing, synchronization, and emitter tracking.
  • Proficiency in Python and C++, plus MATLAB or similar tools for prototyping.
  • Comfort working with RF hardware, IQ data, and lab test equipment.
  • U.S. citizenship with ability to obtain/maintain a security clearance.
  • Ability to translate broad goals into a plan and deliver in weekly iterations.
  • On-site work in Tampa, FL.

Responsibilities

  • Own the localization architecture for a distributed RF sensing network.
  • Develop TDOA and FDOA localization across multiple sensing nodes.
  • Mitigate multipath and non-line-of-sight in indoor environments.
  • Fuse measurements across nodes and techniques; assess angle-of-arrival/value.
  • Create timing, synchronization, and calibration budgets and derive hardware specs.
  • Collaborate with RF hardware and FPGA engineers on receiver channels and timing.
  • Track moving/burst emitters across cellular, Wi‑Fi, Bluetooth, etc.
  • Provide confidence metrics and uncertainty estimates for locations.
  • Use captured RF data for simulation, playback, and live validation.
  • Plan field tests in representative facilities and quantify accuracy/coverage.
  • Feed field results back into node placement and system architecture for improvement.

Skills

TDOA/FDOA localization
Multipath mitigation
Python/C++ programming
MATLAB prototyping
RF hardware experience
IEEE timing/synchronization
Field measurements validation
Signal processing theory
Beamforming/estimation techniques
Security clearance eligible

Education

BS/MS in EE/Applied Physics/Signal Processing

Tools

MATLAB
Python
C++

Job description

Senior RF Geolocation & Direction Finding Engineer - Locate Emitters Through Heavy Multipath

Tampa, FL | On-site

Opportunity Summary

Join an early-stage defense technology company building RF sensing and electronic warfare systems for demanding operational environments. The team is adding a localization capability that must pinpoint wireless devices operating inside dense indoor facilities, where signals bounce off concrete walls and steel structures and it is hard to tell a direct path from a reflection. You will own that capability, applying time and frequency difference-of-arrival techniques, multipath mitigation, and sensor fusion on real hardware in real buildings. This is a role for someone who has already worked through these problems on the receiver side and can apply that experience from day one.

You will be part of a newly formed team of four to five engineers chartered to deliver a V0 of a new distributed RF sensing product in roughly 90 days. The team starts from a short list of functional goals rather than a fixed requirements document, has a dedicated development budget, and decides for itself how to get there. Expect weekly development spins, with new PCB revisions ordered at the end of most weeks. Iterations are engineer-driven: if you see a way to make your design better, you make the call and the respin gets built.

About Us

We are a venture-backed defense technology startup founded by former Army officers with frontline electronic warfare and cyber experience. The company builds spectrum-control systems that detect, disrupt, mask, and manage wireless signals, and designs its receive, compute, and transmit boards, firmware, and software in-house down to the component level. Systems are already fielded with Army and special operations users, defense programs are advancing toward production, and a new commercial sensing product line is entering large-scale deployment. The team of roughly 15 is growing quickly ahead of its next funding round.

Job Duties
  • Own the localization architecture for a distributed RF sensing network deployed inside complex indoor facilities
  • Develop TDOA and FDOA localization using precisely timestamped detections across multiple sensing nodes
  • Develop multipath and non-line-of-sight mitigation for reflective concrete and steel environments
  • Evaluate where angle-of-arrival and hybrid approaches add value, and fuse measurements across nodes and techniques
  • Create timing, synchronization, and calibration error budgets and translate them into hardware requirements
  • Work with RF hardware and FPGA engineers on receiver channels, timestamping, antenna placement, and processing partitioning
  • Build tracking for moving, intermittent, and burst-mode emitters across cellular, Wi-Fi, Bluetooth, and other protocols
  • Develop confidence metrics and uncertainty estimates for reported device locations
  • Use captured RF data for simulation and playback, then validate on live systems
  • Plan and run field tests in representative facilities and quantify accuracy, coverage, and failure modes
  • Feed field results back into node placement, timing, antenna, and system architecture
Qualifications
  • BS or MS in Electrical Engineering, Applied Physics, Signal Processing, or a related field
  • 5+ years in RF geolocation, direction finding, wireless or in-building localization, cellular network planning, radar, or closely related work
  • Hands‑on experience implementing time and/or frequency difference-of-arrival localization on real receiver hardware
  • Proven experience solving multipath, reflection, and non‑line-of-sight problems in indoor or urban environments
  • Experience validating localization performance with field measurements rather than simulation alone
  • Strong foundation in estimation theory, timing and synchronization, and emitter tracking
  • Proficiency with Python and C++, plus MATLAB or similar tools for algorithm prototyping
  • Comfortable working directly with RF hardware, captured IQ data, and lab test equipment
  • U.S. citizenship required, with the ability to obtain and maintain a security clearance
  • Comfortable turning broad goals into your own plan and delivering on weekly iteration cycles with minimal top‑down direction
  • Able to work on‑site in Tampa, FL
Preferred Experience
  • Telecom or wireless infrastructure experience with handset or receiver location in buildings
  • Background in SIGINT, electronic warfare, direction finding, or spectrum monitoring
  • Experience with UWB, RTLS, cellular localization, or distributed sensor networks
  • Precision timing experience with PTP, White Rabbit, or GPS‑disciplined oscillators
  • Antenna array, beamforming, MUSIC, or ESPRIT experience
  • Kalman filtering, particle filtering, or Bayesian tracking
  • Defense experience is not required; telecom and commercial wireless backgrounds are equally valued
Why Join Us
  • Build a core localization capability the company does not yet have and own its architecture
  • Solve hard indoor RF problems where textbook approaches fall short, and prove the answer in real buildings
  • Dedicated development budget, so the team is not forced to cut corners to hit the schedule
  • Weekly build, test, and iterate cycles where engineers decide when a design needs another spin
  • Optional travel to field exercises, new equipment training, and customer demonstrations for those who want it; no one is required to travel
  • Health, dental, and vision coverage with employer‑subsidized premiums
  • 401(k) with company match, available from day one
  • Unlimited PTO with no accrual period
  • Streamlined hiring process: one recruiter conversation and one virtual technical interview with the team you would join
  • Join at an early stage with significant ownership and long‑term growth as the company scales
Compensation Details

$120,000 - $150,000

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

FPGA/DSP Engineer - Wideband Signal Processing
FPGA/DSP Engineer - Wideband Signal Processing

Approach Venture • Tampa (FL)

On-site
USD 120,000 - 150,000
RF Analog Design Engineer
RF Analog Design Engineer

Software Placement Group • Austin (TX)

On-site
USD 110,000 - 140,000
Relocation assistance provided
401(k) retirement plan with company"s"
Medical, dental, and vision insurance
+2
Staff RF Systems and Integration Engineer
Staff RF Systems and Integration Engineer

FlightWave Aerospace - A Red Cat Company • Torrance (CA)

On-site
USD 132,000 - 183,000
Senior Radio Frequency Engineer
Senior Radio Frequency Engineer

Engtal • Austin (TX)

On-site
USD 140,000 - 190,000
Health benefits
Team events
Complimentary lunches
+1
RF Analog Design Engineer
RF Analog Design Engineer

Software Placement Group • Huntsville (AL)

On-site
USD 110,000 - 140,000
Relocation assistance
401(k) retirement plan
Medical, dental, and vision insurance
+1
Sr. RF Engineer
Sr. RF Engineer

Accelint • Mullica Hill (NJ)

Hybrid
USD 165,000 - 215,000
Paid Time Off
Paid Company Holidays
Optional HSA and FSA
+2
Sr. RF Engineer, 5G Tactical Communications
Sr. RF Engineer, 5G Tactical Communications

Assured Space Access, Inc • Irvine (CA)

On-site
USD 155,000 - 200,000
Medical coverage
401(k) with company matching
Relocation assistance
+1
RF Analog Design Engineer
RF Analog Design Engineer

Horan Hiring Solutions, LLC • Austin (TX)

On-site
USD 110,000 - 140,000
Competitive salary
Medical, dental, and vision insurance
401(k) retirement plan with company %
+2
RF Analog Design Engineer
RF Analog Design Engineer

Joseph Michaels International • Austin (TX)

On-site
USD 110,000 - 140,000
Annual incentives
Medical coverage
401(k) with company contribution
+5
RF Analog Design Engineer
RF Analog Design Engineer

ASHFORD CONNEX, LLC • Austin (TX)

On-site
USD 110,000 - 140,000
Competitive compensation
Medical, dental, and vision insurance
401(k) retirement plan with companycon