FPGA/DSP Engineer - Wideband Signal Processing

engineeringjobs.net, Inc.; Tampa (FL); On-site; USD 120,000 - 150,000; Full time

Job summary

engineeringjobs.net, Inc. in Tampa, FL is seeking an FPGA/DSP Engineer to build the real-time core of advanced RF systems. You will own FPGA-based signal processing from samples to outputs and drive timing closure across high-utilization designs.

Join a fast-moving, defense-oriented startup developing custom RF electronics, firmware, and software, with significant ownership and direct impact on system performance.

Qualifications

• BS or higher in a technical field and practical FPGA experience.
• 5+ years FPGA development focused on DSP, SDR, radar, or real-time systems.
• Strong VHDL/Verilog/SystemVerilog and timing closure in complex designs.

Responsibilities

• Own FPGA-based signal processing from digitized RF samples through detection outputs.
• Develop wideband DSP pipelines for real-time processing of large bandwidths.
• Implement DDCs, filters, FFTs, channelizers, detectors, and CFAR techniques.
• Build protocol-aware detection and timestamping for wireless signals (LTE/5G, WiFi, GNSS).
• Extend in-house processing in FPGA fabric; support 2G/3G/LTE/5G environments.
• Design high-throughput data paths using JESD204B/C, AXI, DMA, Ethernet, PCIe.
• Coordinate with RF/geolocation engineers for synchronization and data integrity.
• Drive timing closure and maintain bit-accurate reference models for DSP verification.

Skills

FPGA development

DSP

Real-time systems

VHDL

Verilog

SystemVerilog

AXI/DMA

Vivado

Zynq/MPSoC

JESD204B/C

Python

MATLAB

Education

BS in Electrical Engineering or related

Tools

Vivado

AMS/Xilinx toolchain

JESD204B/C

MATLAB

Python

UVM

Job description

FPGA/DSP Engineer, Wideband Signal Processing - Build the Real-Time Core of Advanced RF Systems

Tampa, FL | On-site

Opportunity Summary

Join an early-stage defense technology company developing advanced RF sensing and electronic systems for demanding operational environments. The team builds its own hardware, firmware, and signal-processing architecture from the ground up, with systems already being evaluated and deployed by government and defense customers.

About Us

We are a venture-backed defense technology startup founded by former military operators who experienced firsthand the limitations of existing electronic warfare systems. The company designs custom RF electronics, firmware, embedded systems, and software internally rather than relying primarily on packaged subsystems. The team is moving quickly from prototype systems toward broader customer deployment, creating significant ownership for engineers joining at this stage.

Job Duties

• Own FPGA-based signal processing from digitized RF samples through detection outputs
• Develop wideband DSP pipelines capable of processing large instantaneous bandwidths in real time
• Implement digital downconversion, filtering, polyphase channelization, FFT processing, energy detection, adaptive thresholds, CFAR techniques, and burst detection
• Build protocol-aware detection and timestamping for cellular, Wi‑Fi, Bluetooth, GNSS, and other wireless signals
• Extend existing in-house processing that operates on protocol frames and subframes directly in FPGA fabric
• Implement processing for 2G, 3G, LTE, and 5G signal environments where applicable
• Develop precise hardware timestamping tied to disciplined timing references for distributed sensing and time-difference-of-arrival techniques
• Build coherent multichannel processing that preserves phase information for angle-of-arrival and other localization methods
• Partner with RF and geolocation engineers to maintain synchronization and signal integrity across multiple channels
• Design high-throughput data paths using JESD204B/C, AXI, DMA, Ethernet, PCIe, or comparable interfaces
• Support high-rate transfer of IQ data, detections, timestamps, and metadata to downstream processing systems
• Partition workloads across FPGA fabric, embedded ARM processors, and edge compute hardware based on latency, bandwidth, and processing requirements
• Drive timing closure on dense, high-utilization FPGA designs
• Own simulation, verification, hardware-in-the-loop testing, and regression coverage
• Develop and maintain bit-accurate reference models using Python, MATLAB, or similar tools
• Debug designs directly on hardware using scopes, logic analyzers, spectrum analyzers, and other RF test equipment
• Reuse and adapt internal FPGA IP where it improves schedule without compromising performance or maintainability
• Help establish reusable FPGA architecture, coding standards, and verification practices as the engineering team grows

Qualifications

• BS in Electrical Engineering, Computer Engineering, or a related technical discipline, or equivalent practical experience
• 5+ years of FPGA development experience focused on DSP, SDR, communications, radar, or similar real-time systems
• Strong VHDL, Verilog, and/or SystemVerilog experience
• Hands-on experience with AMD/Xilinx development environments including Vivado
• Demonstrated ability to close timing on complex, high-utilization FPGA designs
• Experience shipping streaming DSP implementations such as DDCs, filters, FFTs, channelizers, detectors, or similar signal-processing blocks
• Experience with Zynq UltraScale+, RFSoC, MPSoC, or comparable heterogeneous FPGA platforms
• Strong understanding of AXI-based architectures, DMA, memory interfaces, and high-throughput data movement
• Experience with JESD204B/C or similar high-speed converter interfaces
• Experience moving high-rate data off-platform using Ethernet, PCIe, or comparable interfaces
• Strong verification practices using testbenches, cocotb, UVM, MATLAB, Python, or similar tools
• Ability to build bit-accurate or bit-true reference models for DSP verification
• Comfortable debugging hardware in the lab with RF and digital test equipment
• Strong understanding of fixed-point arithmetic, latency, throughput, resource utilization, and timing tradeoffs

Preferred Experience

• Experience with LTE, 5G, or other cellular PHY or protocol processing based on 3GPP standards
• Familiarity with 2G or 3G cellular protocols
• Experience with Wi‑Fi or Bluetooth baseband processing
• Background in SIGINT, electronic warfare, spectrum monitoring, wireless sensing, or radar signal processing
• Experience processing communications protocols directly in FPGA fabric
• Experience with coherent receiver architectures, array processing, beamforming, or angle-of-arrival techniques
• Familiarity with distributed sensing and TDOA-based geolocation
• Experience maintaining phase coherence across multiple RF channels
• Vitis HLS, System Generator, HDL Coder, or other model-based FPGA development experience
• Experience integrating FPGA processing with ARM processors, GPUs, or other heterogeneous compute platforms
• Experience developing custom firmware and control logic rather than primarily integrating third-party IP

Why Join Us

• Own a core technical capability that directly determines system performance
• Work on custom FPGA, RF, and signal-processing architecture rather than integrating only prepackaged subsystems
• Build real-time processing for complex wireless protocols directly in FPGA fabric
• Work across RF hardware, firmware, embedded systems, geolocation, and software
• Join a small team where individual engineers have significant architectural influence
• Build technology used by government and defense customers in demanding operational environments
• Help take a new hardware platform from advanced prototype through customer validation and production
• Join at an early stage with significant opportunity for technical ownership and long-term growth

Compensation Details

$120,000 - $150,000