Repair Welder - 2nd Shift

American SpiralWeld Pipe Company, LLC

Paris (TX)

On-site

USD 42,000 - 54,000

Full time

14 days+

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

AMERICAN SpiralWeld Pipe Company is seeking a 2nd Shift Repair Welder for our Southwest Operation in Paris, TX. You will be setting up and welding pipe repairs to meet structural standards, inspecting welds, and preparing pipes for repair, all while following safety rules.

The role requires welding in various positions, careful attention to weld quality, and the ability to work with limited supervision. Benefits accompany competitive pay and growth opportunities at AMERICAN SpiralWeld Pipe

Qualifications

  • Must pass a 3G weld test that includes carbon arc back gouging.
  • Must be physically able to perform the essential functions of the job, with or without reasonable accommodations.
  • Must be able to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence.
  • Ability to effectively present information in one-on-one and small group situations to other employees of the organization.
  • Must be able to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
  • Must be able to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form.
  • Must be able to deal with problems involving several concrete variables in standardized situations.
  • Must be able to read, write, and effectively communicate in English.

Responsibilities

  • Sets-up and operate Flux core wire welding machines for the Repair Rack.
  • Strikes (forms) arc, manually guides electrode or gun along weld line, maintaining length of arc and speed of movement to form specified depth of fusion and bead, as judged from color of metal, sound of weld, and size of molten puddle.
  • Welds in flat, horizontal, and vertical positions.
  • Changes out consumables i.e.: gas bottles and sets to proper pressures, changes wire.
  • Sets welder Amps and Volts to welding specification and sets wire feeder to proper speed to the welding specification.
  • Self-examination of weld for bead size, proper surface finish, and compliance with specifications.
  • Chips off excess weld, slag, and spatter.
  • Identifies weld defects on pipe; identifies areas of pipe that require repair, either pre-marked by inspectors or through visual inspection.
  • Positions pipe on repair rack on the rotators to facilitate the repair process.
  • Performs necessary preparatory work by grinding, gouging, or otherwise preparing pipe.
  • Compliance with all safety rules.
  • Level I welder requires minimal, if any, supervision to accomplish the essential functions of the job.
  • Maintains completion of repairs to be within or at the standard time for repairs.
  • Successfully passes entry and all annual weld tests.
  • Other duties may be assigned by management including but not limited to cross training and housekeeping.

Job description

Is AMERICAN the right fit for you?

AMERICAN SpiralWeld Pipe Company is hiring for a 2nd Shift Repair Welder at our Southwest Operation in Paris, TX. At AMERICAN, we believe in doing things THE RIGHT WAY. That's why our employees earn competitive pay, receive excellent benefits, and have opportunities to grow. All this while making products the world needs.

As a Repair Welder, you will be setting up and welding pipe repairs required to meet structural pipe standards. They identify and manually weld and r\reap defects in welded pipe from the sub-arc welding equipment. These responsibilities are accomplished by performing the duties described herein.

  • Sets-up and operate Flux core wire welding machines for the Repair Rack.
  • Strikes (forms) arc, manually guides electrode or gun along weld line, maintaining length of arc and speed of movement to form specified depth of fusion and bead, as judged from color of metal, sound of weld, and size of molten puddle.
  • Welds in flat, horizontal, and vertical positions.
  • Changes out consumables i.e.: gas bottles and sets to proper pressures, changes wire.
  • Sets welder Amps and Volts to welding specification and sets wire feeder to proper speed to the welding specification.
  • Self-examination of weld for bead size, proper surface finish, and compliance with specifications.
  • Chips off excess weld, slag, and spatter.
  • Identifies weld defects on pipe; identifies areas of pipe that require repair, either pre-marked by inspectors or through visual inspection.
  • Positions pipe on repair rack on the rotators to facilitate the repair process.
  • Performs necessary preparatory work by grinding, gouging, or otherwise preparing pipe.
  • Compliance with all safety rules.
  • Level I welder requires minimal, if any, supervision to accomplish the essential functions of the job.
  • Maintains completion of repairs to be within or at the standard time for repairs.
  • Successfully passes entry and all annual weld tests.
  • Other duties may be assigned by management including but not limited to cross training and housekeeping.
MINIMUM QUALIFICATIONS
  1. Must pass a 3G weld test that includes carbon arc back gouging.
  2. Must be physically able to perform the essential functions of the job, with or without reasonable accommodations.
  3. Must be able to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence.
  4. Ability to effectively present information in one-on-one and small group situations to other employees of the organization.
  5. Must be able to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
  6. Must be able to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form.
  7. Must be able to deal with problems involving several concrete variables in standardized situations.
  8. Must be able to read, write, and effectively communicate in English.
PREFERRED QUALIFICATIONS
  1. AWS Certification preferred.
ESSENTIAL PHYSICAL FUNCTIONS
  • The employee is regularly required to use hands to finger, handle, or feel, and talk or hear.
  • The employee is regularly required to sit, or stand, walk, stoop, kneel, crouch, or crawl.
  • The employee is occasionally required reach with hands and arms and climb or balance
  • The employee must regularly lift and move up to 10 pounds, frequently lift and move up to 25 pounds and occasionally lift and move up to 75 pounds.
  • Specific vision abilities required by this job include close vision, distance vision, color vision, and ability to adjust focus.
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Repair Welder - 2nd Shift
Repair Welder - 2nd Shift

AMERICAN SpiralWeld Pipe Company • Paris (TX)

On-site
USD 40,000 - 60,000
Fab Welder - 1st and 2nd Shift
Fab Welder - 1st and 2nd Shift

American SpiralWeld Pipe Company, LLC • Columbia (SC)

On-site
USD 42,000 - 66,000
Competitive pay
Shift differentials
Medical, dental, vision
+2
2nd Shift Repair Welder - Pipe Welds & Repairs
2nd Shift Repair Welder - Pipe Welds & Repairs

AMERICAN SpiralWeld Pipe Company • Paris (TX)

On-site
USD 40,000 - 60,000
2nd Shift Pipe Repair Welder — Hands-on Growth
2nd Shift Pipe Repair Welder — Hands-on Growth

American SpiralWeld Pipe Company, LLC • Paris (TX)

On-site
USD 42,000 - 54,000
Welder | 2nd Shift
Welder | 2nd Shift

Viking Group, Inc. • Columbus (OH)

On-site
USD 42,000 - 60,000
Combo Pipe Welder
Combo Pipe Welder

Matrix Service Company • North Carolina

On-site
USD 52,000 - 76,000
Pipe Welder
Pipe Welder

B&S Piping, Inc. • Greensboro (GA)

On-site
USD 52,000 - 76,000
401(k) matching
Competitive salary
Dental insurance
+3
Welder III 1st Shift
Welder III 1st Shift

Thompson Pipe Group • Rialto (CA)

On-site
USD 55,000 - 75,000
Medical, Dental, Vision benefits
Life Insurance
Company 401K Retirement Plan
+3
Welder - 2nd or 3rd shift
Welder - 2nd or 3rd shift

JARP Industries Inc • Schofield (WI)

On-site
USD 29,000 - 43,000
Paid Time Off (PTO)
10 paid holidays
Medical, dental, and vision insurance
+6
Fabrication Fitter-Welder (Pipe & Fittings) - 1st and 2nd Shift
Fabrication Fitter-Welder (Pipe & Fittings) - 1st and 2nd Shift

American Cast Iron Pipe Company • Columbia (SC)

On-site
USD 42,000 - 66,000
Competitive pay
Shift differential
Benefits package
+3