Radiographer LPC LSBS3 63

Precision Castparts Corp. (PCC); Portland (OR); On-site; USD 65,000 - 90,000; Full time

Job summary

PCC Structurals in Portland, Oregon seeks an experienced Radiographer to set up castings for radiography, operate x-ray equipment, and ensure radiographs meet PCC specifications. The role includes mentoring colleagues, maintaining safety, and updating procedure logs.

Applicant should perform precise technique setups, handle films/IPs, and participate in audits by PCC internal and external groups, while ensuring quality standards are met in a demanding NDTE environment.

Qualifications

• Radiography skills demonstrated by the competent performance of all duties.
• High school graduation or GED is required for NDT certification.
• Ability to perform basic mathematical calculations.
• Ability to read, follow and interpret Technique Cards, Quality Control Manuals and other technical specifications.
• Ability to communicate effectively both verbally and in writing.
• Physical ability to perform the essential job functions.

Responsibilities

• Set up castings for radiography according to Techniques Cards and customer specs.
• Operate x-ray machines to capture multiple views while adjusting parameters per specs.
• Inspect radiographs for artifacts, coverage, and clarity; record changes and reshoot if needed.
• Maintain logs and modify Technique Card specifications as required.
• Mentor less skilled Radiographers and support NDTE activities.
• Adhere to PCC safety rules and radiation safety practices.
• Perform other tasks in the x-ray department as directed.

Skills

Radiography

Math skills

Communication

Reading & interpretation

Physical ability

Education

High school diploma or GED

Tools

X-ray machines

DICOM tagging

Job description

Location & Work Details

• Country: United States of America
• State / County: Oregon
• City: Portland
• Division: Structurals
• Company: LPC
• Function: Operations
• Workplace Type: On-Site
• Position type: Full Time

Opportunity ID

23757

Job Description

MISSION:

To produce radiographs to customer and PCC specifications for evaluation of castings.

PRINCIPAL ACCOUNTABILITIES:

1. Setup
Objective: to accurately set up castings for radiography.
Essential Job Functions:
A. Checks routing or requests to determine x-ray needs on parts.
B. Reviews Technique Cards to determine setup requirements, including x-ray techniques, part positions and Film/IP requirements based on Techniques Cards.
C. Sets up additional radiographs of defect areas not covered by Technique Cards.
D. Inspect condition and maintain Film/IP and cassettes. Follow proper handling techniques.
E. Sets up castings on tables in x-ray machines including fixturing, placement of Film/IP's, and DICOM tag identification and penetrameters on Film/IP; sets exposure parameters.
F. Determines priority of radiographs to be taken.
G. Develops best practice setup requirements for newly developed techniques when needed.
H. Visually inspects castings for dirt, penetrant, grinding debris etc.

2. X-Ray Operation
Objective: to effectively and accurately operate x-ray machines and produce radiographs within customer specifications.
Essential Job Functions:
A. Operates x-ray machine control panels and equipment to take multiple views of castings, adjusting radiographic variables such as tube height, voltage and exposure times within customer specifications.
B. Monitor, Maintain, and generate exposures for System Qualifications on X-ray equipment per customer and PCC specifications.
C. Regularly conducts more than one radiographic examination concurrently, and is expected to be able to operate all machines.
D. Removes Film/IP from casting for image processing, while maintaining proper Film/IP handling techniques.
E. After image processing, checks samples of radiographs on each casting for inner fearing Artifacts, clarity, coverage, pixel value and sensitivity; makes changes within customer and PCC specifications; records any changes made; reshoots exposure when needed.
F. Willingness to be audited without notice by all Auditors both PCC Internal and External auditing groups. e.g. PCC NDTE, NADCAP, ISO 9000, etc.

3. Trains, mentors, and assists less skilled Radiographers with setup and operational techniques as needed and assigned. (Marginal job function in NDTE departments)

4. Completes logs and records, and records any modifications to Technique Card specifications.

5. Meets all production and quality standards.

6. Safety
Objective: to take responsibility for and demonstrate safe work practices; to comply with PCC radiation safety practices.
Essential Job Functions:
A. Adheres to plant and department safety rules.
B. Safely operates all equipment and tools.
C. Identifies and reports safety problems.

OTHER (MARGINAL) ACCOUNTABILITIES

7. Performs other tasks as directed and other x-ray department personnel activities.

ESSENTIAL EQUIPMENT, VEHICLES, TOOLS AND/OR MACHINERY:
1. x-ray machines
2. hoists
3. pallet jacks
4. pentrameters
5. styrofoam blocks
6. wooden wedges and blocks
7. straps and chains
8. clamps
9. Digital IPS (Image Processing Station)
10. image detectors (imaging plates or IP's and digital panels)
11. lead back ups
12. levels, protractors, rulers, tape measure, angle finders
13. cassettes
14. fixtures
15. calculators
16. cameras (technique development and NDTE departments only)

TRAINING
1. Training is provided on the job.
2. Radiography Level 1 Courses must be completed (radiation safety, digital method training, etc.)
3. Radiographer Level l Certification must be completed for all modalities (Film, CR, DDA).
4. Must re-certify - Level 1 every five years.

QUALIFICATIONS
1. Radiography skills as demonstrated by the competent performance of all duties OR an equivalent combination of classroom training and work experience.
2. High school graduation of GED (necessary for NDT Certification)
3. Ability to perform basic mathematical calculations. (addition, subtraction, multiplication, division)
4. Ability to read, follow and interpret Technique Cards, Quality Control Manuals and other technical specifications.
5. Ability to communicate effectively both verbally and in writing.
6. Physical ability to perform the essential job functions.

PCC Structurals is committed to a diverse workforce. As Equal Opportunity Employer, VEVRAA Federal Contractor, affirmative action employer we provide equal opportunity to all persons, regardless of race, religion, age, gender, disability, status as a protected veteran, national origin, color, or any other classification in accordance with federal, state, and local statutes, regulations and ordinances "Minority/Female/Disability/Veteran Status/VEVRAA Federal Contractor". Veterans are encouraged to self‑identify as PCC Structurals desires to provide protected veterans priority referrals for open positions. PCC Structurals complies with all laws and regulations associated with the Family Medical Leave Act (FMLA).

In order to ensure reasonable accommodation for individuals protected by Section 503 of the Rehabilitation Act of 1973, the Vietnam Veterans' Readjustment Act of 1974, and Title I of the Americans with Disabilities Act of 1990, applicants that require accommodation in the job application process may contact 503-652-3512 for assistance. PCC Structurals is a VEVRAA Federal Contractor committed to providing priority referrals of protected veterans for its openings. Veterans are encouraged to self‑identify as desires to provide protected veterans priority referrals for open positions. PCC Structurals complies with all laws and regulations associated with the Family Medical Leave Act (FMLA). If you would like more information about Equal Employment Opportunity as an applicant under the law, please visit www.eeoc.gov

This position requires use of information or access to production processes subject to national security controls under U.S. export control laws and regulations (including, but not limited to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR)). To comply with those regulations, this position may require applicants to be U.S. Persons (i.e., U.S. citizens, U.S. lawful permanent residents, protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required export authorizations from the U.S. Department of State or the U.S. Department of Commerce.

Primary Duties & Responsibilities

1. Setup

Objective: to accurately set up castings for radiography.

Essential Job Functions:

1. Checks routing or requests to determine x-ray needs on parts.
2. Reviews Technique Cards to determine setup requirements, including x-ray techniques, part positions and Film/IP requirements based on Techniques Cards.
3. Sets up additional radiographs of defect areas not covered by Technique Cards.
4. Inspect condition and maintain Film/IP and cassettes. Follow proper handling techniques.
5. Sets up castings on tables in x-ray machines including fixturing, placement of Film/IP's, and DICOM tag identification and penetrameters on Film/IP; sets exposure parameters.
6. Determines priority of radiographs to be taken.
7. Develops best practice setup requirements for newly developed techniques when needed.
8. Visually inspects castings