Quality Technician - SMT Service & Repair

Compal USA Technology Inc; Georgetown (TX); On-site; USD 29,000 - 43,000; Full time

Job summary

Compal USA Technology Inc. is seeking a Quality Technician to support SMT/PCBA manufacturing, service, and repair operations in Georgetown, TX. The role involves inspections, material testing, data collection, and collaboration with cross-functional teams.

The candidate should have a hands-on approach, read drawings, operate measurement equipment, and help drive continuous quality improvements. A strong eye for detail and experience with FAI/NPI is preferred.

Qualifications

• High school diploma or technical/vocational education; associate degree preferred.
• Minimum 4 years of quality inspection, electronics, manufacturing quality experience in electronics/SMT/PCBA/server/rack manufacturing.
• Basic understanding of manufacturing quality control and inspection methods.
• Experience using common measurement and inspection tools.
• Ability to read drawings, specifications, work instructions, and inspection criteria.
• Basic computer skills and ability to enter inspection/test data.
• Ability to follow established procedures and engineering instructions.
• Good attention to detail and willingness to perform hands-on inspection and laboratory work.
• Stronger experience with incoming, in-process, final inspection, and/or laboratory testing.
• Able to independently perform routine inspections and tests with limited supervision.
• Able to recognize quality abnormalities and provide initial assessment/data to Quality Engineering.
• Experience coaching or providing technical guidance to junior technicians is desirable.

Responsibilities

• Perform routine quality inspections and manufacturing QC activities throughout the SMT/PCBA production process.
• Support SMT, DIP/through‑hole, assembly, testing, repair, and pack-out quality activities as required.
• Conduct in-process and final inspections according to drawings, specifications, work instructions, control plans, and workmanship standards.
• Monitor manufacturing quality conditions and identify workmanship or process abnormalities.
• Support First Article Inspection (FAI), First Piece Inspection, trial builds, NPI builds, and process qualification activities.
• Identify, document, segregate, and escalation of nonconforming materials and products.
• Support containment, sorting, re-inspection, and verification activities when quality issues occur.
• Perform incoming inspection of materials and components according to inspection procedures and sampling requirements.
• Inspect mechanical parts, PCB/PCBA materials, electronic components, connectors, cables, etc.
• Perform dimensional and visual inspection using appropriate inspection and measurement equipment.
• Verify supplier documentation, part identification, labeling, packaging, workmanship, and material condition.
• Record inspection results and support disposition of nonconforming incoming materials.
• Assist SQE/Quality Engineering with supplier quality investigations and material-related issues.
• Perform laboratory testing and measurement activities by following approved procedures or instructions.
• Operate common quality lab equipment such as microscopes, measuring tools, gauges, and dimensional measurement systems.
• Prepare samples and specimens for inspection, measurement, testing and failure analysis.
• Maintain traceability of samples and test records.
• Support Quality Engineers with validation, reliability, and failure analysis testing.
• Perform visual inspection of PCBA for soldering, component placement, etc.
• Follow ESD and proper electronic component handling requirements.
• Accurately complete inspection reports, test records, checklists, and quality documentation.
• Enter and maintain quality inspection/test data in applicable systems or databases.
• Support NCR/nonconformance records, defect tracking, and quality issue documentation.
• Collect data for quality metrics, defect trends, yield analysis, and process improvement activities.
• Maintain inspection and laboratory records in accordance with document control requirements.
• Follow Quality Management System procedures and work instructions.
• Support internal, customer, and external audit preparation.
• Participate in root cause investigations and corrective/preventive action activities.

Skills

Attention to detail

Hands-on

Problem solving

Communication

Education

High school diploma or technical/vocational education

Associate degree preferred

Tools

Microscopes

Digital microscopes

Measuring tools

Gauges

Dimensional measurement systems

Job description

If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Quality Technician - SMT Service & Repair

Full Time Georgetown, TX, US

2 days ago Requisition ID: 1011

Salary Range: $21.00 To $31.00 Hourly

Position Summary

The Quality Technician supports day-to-day quality activities for an SMT/PCBA manufacturing facility supporting server and rack manufacturing, service, and repair operations.

This role performs manufacturing quality control, incoming material inspection, in-process and final inspection, laboratory testing, quality data collection, and basic failure analysis activities. The technician works closely with Quality Engineering, Manufacturing Engineering, Production, SQE, and other cross-functional teams to ensure materials and products meet applicable drawings, specifications, workmanship standards, and quality requirements.

The position requires a hands‑on individual who can follow established procedures and Quality Engineer instructions while independently performing routine inspection and testing activities.

Key Responsibilities

1. Manufacturing Quality Control

• Perform routine quality inspections and manufacturing quality control activities throughout the SMT/PCBA production process.
• Support SMT, DIP/through‑hole, assembly, testing, repair, and pack‑out quality activities as required.
• Conduct in‑process and final inspections according to drawings, specifications, work instructions, control plans, and workmanship standards.
• Monitor manufacturing quality conditions and identify workmanship or process abnormalities.
• Support First Article Inspection (FAI), First Piece Inspection, trial builds, NPI builds, and process qualification activities.
• Identify, document, segregate, and escalation of nonconforming materials and products.
• Support containment, sorting, re‑inspection, and verification activities when quality issues occur.

2. Incoming Quality Control (IQC)

• Perform incoming inspection of materials and components according to inspection procedures and sampling requirements.
• Inspect mechanical parts, PCB/PCBA materials, electronic components, connectors, cables, thermal/mechanical components, and other production materials as applicable.
• Perform dimensional and visual inspection using appropriate inspection and measurement equipment.
• Verify supplier documentation, part identification, labeling, packaging, workmanship, and material condition.
• Record inspection results and support disposition of nonconforming incoming materials.
• Assist SQE/Quality Engineering with supplier quality investigations and material‑related issues.

3. Laboratory Testing & Measurement

• Perform laboratory testing and measurement activities by following approved procedures, test methods, or Quality Engineer instructions.
• Operate common quality laboratory and inspection equipment such as microscopes, digital microscopes, measuring tools, gauges, dimensional measurement systems, and other applicable test equipment.
• Prepare samples and specimens for inspection, measurement, testing, and failure analysis.
• Accurately record test conditions, results, observations, measurements, and supporting photos/data.
• Maintain appropriate traceability of samples and test records.
• Support Quality Engineers with validation, reliability, and failure analysis testing.

4. SMT / PCBA Quality Support

• Perform visual inspection of PCBAs for soldering, component placement, polarity/orientation, contamination, damage, and workmanship issues.
• Familiar with common SMT/PCBA defects such as solder bridging, insufficient/excess solder, opens, tombstoning, misalignment, damaged components, contamination, and handling damage.
• Support inspection activities involving AOI, X‑ray, microscope, or other inspection equipment where applicable.
• Support quality verification of repaired/reworked PCBAs and service‑return products.
• Follow ESD and proper electronic component handling requirements.

5. Quality Documentation & Data

• Accurately complete inspection reports, test records, checklists, and quality documentation.
• Enter and maintain quality inspection/test data in applicable systems or databases.
• Support NCR/nonconformance records, defect tracking, and quality issue documentation.
• Collect data for quality metrics, defect trends, yield analysis, and process improvement activities.
• Maintain inspection and laboratory records in accordance with document control requirements.

6. Quality System & Continuous Improvement Support

• Follow applicable Quality Management System procedures and work instructions.
• Support internal, customer, and external audit preparation when required.
• Participate in root cause investigations and corrective/preventive action activities under Quality Engineering direction.
• Support 5S, continuous improvement, and quality improvement activities.
• Escalate abnormal quality conditions promptly and provide accurate supporting data.

Qualifications

• High school diploma or technical/vocational education; associate degree preferred.
• Minimum 4 years of quality inspection, electronics, relevant manufacturing quality experience, preferably in electronics, SMT, PCBA, server, rack, or related manufacturing
• Basic understanding of manufacturing quality control and inspection methods.
• Experience using common measurement and inspection tools.
• Ability to read drawings, specifications, work instructions, and inspection criteria.
• Basic computer skills and ability to accurately enter inspection/test data.
• Ability to follow established test procedures and engineering instructions.
• Good attention to detail and willingness to perform hands‑on inspection and laboratory work.
• Stronger experience with incoming, in‑process, final inspection, and/or laboratory testing.
• Able to independently perform routine inspections and tests with limited supervision.
• Able to recognize quality abnormalities and provide initial assessment/data to Quality Engineering.
• Experience supporting FAI, NPI/trial builds, nonconformance investigations, containment, or failure analysis is preferred.
• Experience coaching or providing technical guidance to junior technicians is desirable.

Preferred Technical Skills

Experience with some of the following is preferred but not required:

• SMT/PCBA manufacturing and workmanship inspection
• Incoming Quality Control (IQC)
• IPC workmanship standards, particularly IPC-A-610
• ESD controls and electronic component handling
• Reading mechanical drawings and engineering specifications
• Basic GD&T knowledge
• Digital microscope / optical inspection
• Vernier calipers, micrometers, height gauges, pin gauges and other measuring tools
• CMM or optical dimensional measurement systems
• X‑ray or AOI inspection
• Sample preparation and basic failure analysis
• Basic electrical measurement/testing
• Quality sampling and inspection plans
• NCR/nonconforming material control
• Basic understanding of 5-Why, Fishbone, 8D, SPC, and root cause analysis
• Microsoft Excel and basic quality data analysis
• Strong attention to detail and quality awareness
• Hands‑on technical and problem‑solving ability
• Ability to follow written procedures and engineering instructions
• Good observation and defect‑recognition skills
• Accurate documentation and record keeping
• Ability to handle multiple quality activities based on production priorities
• Effective communication with Quality, Engineering, Production, and Supplier Quality teams
• Willingness to learn new inspection, laboratory, and measurement equipment
• Ability to work independently on routine assignments and elevate issues appropriately
• Flexible and comfortable working in a multi‑function quality technician role