Quality Technician - 2nd Shift

Ichor Systems, Inc.; Osakis (MN); On-site; USD 26,000 - 44,000; Full time

Benefits offered by this job

Medical benefits

Dental & Vision

Paid time off

Paid holidays

Job summary

Ichor Systems, Inc. in Minnesota is seeking an inspector to perform in-process and final inspections on precision machined parts. You will read drawings, apply GD&T, and use IMTE, CMM, and vision systems to verify critical features.

You will document results, ensure traceability, and support audits and continuous improvement initiatives. This role requires attention to detail and teamwork in a fast-paced manufacturing environment.

Qualifications

• Strong blueprint reading and GD&T understanding.
• Experience with precision measurement and CMM software.
• Experience with vision inspection systems is a plus.

Responsibilities

• Perform in-process, first article, and final inspections on machined components.
• Interpret drawings and GD&T requirements to verify features.
• Use IMTE and CMM/vision systems for precise measurements.
• Run or support PC-DMIS CMM inspections and verify results.
• Document inspection results and ensure traceability and compliance.

Skills

Blueprint reading

GD&T

IMTE usage

CMM inspection

Vision systems

Attention to detail

Teamwork

Education

High school diploma or GED

Technical degree preferred

Tools

PC-DMIS

Job description

• Perform in-process, first article, and final inspections on machined components and assemblies
• Interpret engineering drawings, blueprints, and GD&T requirements
• Inspect tight-tolerance and critical features on precision machined components
• Use inspection, measurement, and test equipment (IMTE) such as micrometers, calipers, height gauges, bore gauges, and indicators
• Operate and utilize vision systems for non-contact measurement and feature verification
• Run and/or support CMM inspections using programs developed in PC-DMIS
• Verify failed or out-of-tolerance CMM features by:
• Re-measuring using alternate methods (manual tools, vision systems, or re-alignment)
• Identifying potential programming, alignment, or fixturing issues
• Use molding/replication putty (e.g., silicone or comparable compounds) to:
• Capture internal or inaccessible features
• Enable indirect measurement of complex geometries
• Validate dimensions that cannot be directly probed or visually inspected
• Identify, document, and segregate nonconforming material in accordance with MRB procedures
• Complete inspection reports and documentation accurately (FAI, in-process, final inspection records)
• Verify traceability, material certifications, and documentation compliance
• Support root cause analysis and corrective actions related to measurement discrepancies
• Maintain cleanliness and organization of inspection areas and equipment
• Ensure proper handling and protection of precision components
• Support internal and external audits (ISO 9001 / AS9100 / customer audits)
• Communicate inspection results and discrepancies clearly to production, engineering, and quality teams

Key Responsibilities

JOB DESCRIPTION

• Perform in-process, first article, and final inspections on machined components and assemblies
• Interpret engineering drawings, blueprints, and GD&T requirements
• Inspect tight-tolerance and critical features on precision machined components
• Use inspection, measurement, and test equipment (IMTE) such as micrometers, calipers, height gauges, bore gauges, and indicators
• Operate and utilize vision systems for non-contact measurement and feature verification
• Run and/or support CMM inspections using programs developed in PC-DMIS
• Verify failed or out-of-tolerance CMM features by:
• Re-measuring using alternate methods (manual tools, vision systems, or re-alignment)
• Identifying potential programming, alignment, or fixturing issues
• Use molding/replication putty (e.g., silicone or comparable compounds) to:
• Capture internal or inaccessible features
• Enable indirect measurement of complex geometries
• Validate dimensions that cannot be directly probed or visually inspected
• Identify, document, and segregate nonconforming material in accordance with MRB procedures
• Complete inspection reports and documentation accurately (FAI, in-process, final inspection records)
• Verify traceability, material certifications, and documentation compliance
• Support root cause analysis and corrective actions related to measurement discrepancies
• Maintain cleanliness and organization of inspection areas and equipment
• Ensure proper handling and protection of precision components
• Support internal and external audits (ISO 9001 / AS9100 / customer audits)
• Communicate inspection results and discrepancies clearly to production, engineering, and quality teams

Qualifications

• High school diploma or GED required; technical degree preferred
• 3–5 years of inspection experience in precision machining, aerospace, or manufacturing
• Strong understanding of blueprint reading and GD&T
• Experience using precision measuring instruments (IMTE)
• Experience with vision inspection systems (preferred)
• Experience verifying CMM results and troubleshooting measurement discrepancies (preferred)
• Experience using replication/molding techniques for inspection (preferred)
• Familiarity with AS9100 / ISO 9001 quality systems preferred
• Experience with CMM operation (preferred)

Skills & Competencies

• Strong attention to detail and accuracy
• Ability to inspect tight-tolerance machined features
• Ability to evaluate difficult-to-access features using indirect methods
• Analytical thinking and problem-solving
• Ability to validate and challenge automated inspection results (CMM/vision systems)
• Effective communication and teamwork
• Basic computer skills for documentation and reporting
• Ability to work in a fast-paced, high-mix manufacturing environment

Working Conditions

• Shop floor and inspection lab environment
• Standing for extended periods
• Handling small, tight-tolerance machined components
• Occasional lifting of parts or fixtures
• Ability to sit, stand, walk, bend, and lift up to 50 lbs.

For candidates based in Minnesota: The pay range for this position is $19.33 – $32.84 per hour, plus 10% differential.

Our pay ranges are determined by role, level, and location. Within the range, individual pay is determined by work location and additional job-related factors, including knowledge, skills, experience, tenure, and relevant education or training. The pay scale is subject to change depending on business needs. Your recruiter can share more about the specific range for your location during the hiring process. Ichor is committed to supporting your personal well-being and professional development. Our benefits are designed to help you maintain a healthy work-life balance, provide peace of mind, and prepare for your future. We offer medical, dental, and vision plans across all locations, allowing team members to select the coverage that best meets their healthcare needs and budget. Our benefits also include a paid time-off program and paid holidays to support your time away from work. A summary of our Benefits will be provided during the interview process.

ITAR Compliance

The business site where this position is located is an ITAR-compliant operation. Due to ITAR regulations, Ichor Systems is only able to employ US Persons. A US person is a lawful permanent resident (immigrant with “green card” permanent authorization to work document) or who is a protected person (a citizen, a national, a refugee, or a person granted asylum). Non-citizens with other visas are not eligible for hire at this location.

Ichor Precision Machining (IPM) is an ITAR-compliant operation. Due to ITAR regulations, Ichor Systems is only able to employ US Persons. A US person is a lawful permanent resident (immigrant with “green card” permanent authorization to work document) or who is a protected individual (a citizen, a national, a refugee, or a person granted asylum). Individuals with temporary visas are not eligible for hire.

About Us

Ichor is an experienced leader in the critical subsystems and turnkey process equipment marketplace. Our capabilities enable the design and creation of a complete outsourced solution ranging from product concept to turnkey manufacturing to legacy service.

Ichor offers world-class process engineering, value added manufacturing, materials management and testing capabilities. Our 1500+ employees are strategically located to provide our customers with the highest level of customer service and support from our program management, sales, engineering, and executive management teams.

Our continued expansion of capabilities in South East Asia better aligns our production facilities with our customers' supply chain strategies. This further enables our expansion into new products and markets.

Ichor is headquartered in Fremont, California with manufacturing locations in Oregon, Texas, Singapore, Malaysia and the UK. Our sales and engineering office is strategically located in Silicon Valley, California.

About The Team

Precision machining is Ichor Precision Machining’s heritage and core strength. IPM's skilled and dedicated employees deliver the most complex, extreme tolerance, and superior surface finish components at unsurpassed quality levels. Joining the team at IPM means working with dedicated, highly skilled employees that drive continuous improvement and ensure we deliver superior results to our customers. IPM is excited to share that we are now a part of the Ichor Systems family of companies. Ichor is headquartered in Fremont, California with manufacturing locations in Minnesota, Arizona, Nevada, Oregon, Texas, Mexico, Singapore, Malaysia and the UK. Our sales and engineering office is strategically located in Silicon Valley, California.

Ichor Precision Machining (IPM) is an ITAR-compliant operation. Due to ITAR regulations, Ichor Systems is only able to employ US Persons. A US person is a lawful permanent resident (immigrant with “green card” permanent authorization to work document) or who is a protected individual (a citizen, a national, a refugee, or a person granted asylum). Individuals with temporary visas are not eligible for hire.

Ichor Systems provides equal employment opportunity (EEO) to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, or any other characteristic protected by federal, state or local law. In addition, Ichor Systems will provide reasonable accommodations for qualified individuals with disabilities.