Quality Inspector

Palmetto State Armory L; Lexington (KY); On-site; USD 42,000 - 62,000; Full time

Job summary

Palmetto State Armory L in Lexington, KY is seeking a Quality Inspector for full-time manual labor. The role focuses on inspection, measurement, and documentation of in-process and finished goods using precision equipment to ensure materials meet internal and customer quality standards.

Responsibilities include performing incoming and first article inspections, in-process checks, and providing feedback to production.

Qualifications

• High school diploma or equivalent (GED) with 1–2 years in Quality Tech/Inspector role.
• Ability to read and interpret engineering drawings, GD&T, BOMs, and changes.
• Strong documentation and measurement skills; proficient with MS Office/Excel.

Responsibilities

• Inspect materials using calipers, micrometers, and related tools.
• Perform incoming and first article inspections and report results.
• Provide in-process inspections and random samples to verify quality.
• Communicate quality findings to production and management.
• Prepare documentation such as Non-Conforming Material Reports.

Skills

Quality inspection

GD&T reading

Communication

Problem solving

Excel

Education

High school diploma or GED

Tools

Calipers

Micrometers

Pitch micrometers

TIR Gage

Air Gage

Height Gages

Thread Gages

CMM

Mahr Shaft

Zoller Tool Presetter

Job description

If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Quality Inspector

Full Time Manual Labor Lexington, KY, US

JOB PURPOSE

The QualityInspectoris responsible forthe inspection, measurement, documentation of in-process and finished goods. This position willutilizemeasurement and test equipment to verify allmaterial meets or exceeds the current quality standards internally and externally (Customer) per established procedures. The QualityInspectormust follow all current procedures with a strict adherence to the Quality System and provide full Quality support to Manufacturing. Other areas can/will be added due to changing business needs.

DUTIES AND RESPONSIBILITIES

• Inspect materials using appropriate methods and equipment such as (not limited to) Calipers, Micrometers, Pitch Micrometers, TIR Gage, Air Gage, Height Gages, Thread Gages etc.
• Perform incoming material inspections as necessary to validate they meet necessary specifications.
• Perform First Article Inspections and provide results to support manufacturing and production of material and components.
  • Note: FAI’s are very high in priority and must always be prioritized appropriately
• Provide In-Process Inspections, random and scheduled, to manufacturing to verify quality requirements are being met.
  • In-Process inspections are to be performed routinely to monitor production processes and parts. Parts may be designated by production for QA verification; however, Quality Inspectors are expected at random unscheduled intervals, select parts from in-process and finished goods bin for validation and verification. (Random sampling)
• Provide feedback (communication) to production personnel and management on the current state of production quality and any issues that arise.
  • Communication can/will include email, telephone, two-way radios, etc.
• Ability to analyze quality data and decide whether to certify or reject specific products and communicate results appropriately.
• Ability to prepare written documentation such as Non-Conforming Material Reports, Product Acceptance Records, Inspection Plans, Quality Alerts etc.
• Ability to operate (but not limited to) the MahrShaft , Zoller Tool Presetter , Comparator, Air Gages, CMM’s
• Ability to participate in process and product audits in support of the Quality System (ISO Audits)
• While this Job Location’s primary work area is designated , it is to be expected the Quality Inspector has full understanding and ability to perform within other job locations in the Quality Department in order to alleviate any issues that arise from staffing (Cross Trained for other locations/labs/QA roles)
• Ability and willingness to perform other job duties as deemed necessary by the Quality Manager or management.
• Adhere to guidelines and procedures to ensure the safe handling, removal, and disposal of both hazardous and non-hazardous materials.
• Any other job duties as assigned.

QUALIFICATIONS

• High school diploma or equivalent (GED) plus 1-2 years of experience in a Quality Technician/Inspector role or equivalent experience.
• Ability to read and understand Safety Rules, Standard Operating Procedures, Forms etc.
• Ability to read and interpret engineering drawings, internal or external, including Dimensions, GD&T (Geometric Design and Tolerance), Parts Lists, Bills of Materials, Revisions & Changes
• Ability to operate complex measuring equipment such as Laser Measuring devices, surface profilometer, Coordinate Measuring Machine (CMM) etc. (Note: This does not require programming)
• Ability to use hand measurement tools such as height gages, calipers, micrometers, air gages, thread rings and plugs, pitch micrometers etc.
• Ability to complete routing forms and inspection documents and distribute as required .
• Ability to apply problem solving techniques to work with production personnel in solving potential product and process problems encountered during manufacturing.
• Ability to communicate effectively in a technical manner.
• Possess strong computer skills. MS Office (Emphasis in Excel), Google Drive & Google Suite
• Desire to improve themselves, the quality system and instill a quality mentality into co-workers.
• Ability to assist in the communication of the quality system requirements to other personnel.

WORKING CONDITIONS

• Adhere to all safety and quality system standards and principles.
• It is to be expected that the Quality Inspector understands that laboratory environments are to be kept clean and tidy.

PHYSICAL REQUIREMENTS

• Ability to occasionally lif t and/or move up to 50lbs safely.
• Must have dexterity in order to quickly sort through items and remove/replace the parts needed during the manufacturing process(es)
• Ability to use common hand and power tools.

Export Control Compliance Notice

This position may involve access to technology or software source code subject to U.S. export control laws (ITAR/EAR). Employment is contingent on verifying U.S. Person status or obtaining any necessary export license/confirming the availability of a license exception. Applicants must provide information for export control screening, which will be reviewed for compliance. DC Machine may elect not to pursue a license or exception and may decline to proceed with an applicant on that basis.

JOB PURPOSE

The QualityInspectoris responsible forthe inspection, measurement, documentation of in-process and finished goods. This position willutilizemeasurement and test equipment to verify allmaterial meets or exceeds the current quality standards internally and externally (Customer) per established procedures. The QualityInspectormust follow all current procedures with a strict adherence to the Quality System and provide full Quality support to Manufacturing. Other areas can/will be added due to changing business needs.

DUTIES AND RESPONSIBILITIES

• Inspect materials using appropriate methods and equipment such as (not limited to) Calipers, Micrometers, Pitch Micrometers, TIR Gage, Air Gage, Height Gages, Thread Gages etc.
• Perform incoming material inspections as necessary to validate they meet necessary specifications.
• Perform First Article Inspections and provide results to support manufacturing and production of material and components.
  • Note: FAI’s are very high in priority and must always be prioritized appropriately
• Provide In-Process Inspections, random and scheduled, to manufacturing to verify quality requirements are being met.
  • In-Process inspections are to be performed routinely to monitor production processes and parts. Parts may be designated by production for QA verification; however, Quality Inspectors are expected at random unscheduled intervals, select parts from in-process and finished goods bin for validation and verification. (Random sampling)
• Provide feedback (communication) to production personnel and management on the current state of production quality and any issues that arise.
  • Communication can/will include email, telephone, two-way radios, etc.
• Ability to analyze quality data and decide whether to certify or reject specific products and communicate results appropriately.
• Ability to prepare written documentation such as Non-Conforming Material Reports, Product Acceptance Records, Inspection Plans, Quality Alerts etc.
• Ability to operate (but not limited to) the MahrShaft , Zoller Tool Presetter , Comparator, Air Gages, CMM’s
• Ability to participate in process and product audits in support of the Quality System (ISO Audits)
• While this Job Location’s primary work area is designated , it is to be expected the Quality Inspector has full understanding and ability to perform within other job locations in the Quality Department in order to alleviate any issues that arise from staffing (Cross Trained for other locations/labs/QA roles)
• Ability and willingness to perform other job duties as deemed necessary by the Quality Manager or management.
• Adhere to guidelines and procedures to ensure the safe handling, removal, and disposal of both hazardous and non-hazardous materials.
• Any other job duties as assigned.

QUALIFICATIONS

• High school diploma or equivalent (GED) plus 1-2 years of experience in a Quality Technician/Inspector role or equivalent experience.
• Ability to read and understand Safety Rules, Standard Operating Procedures, Forms etc.
• Ability to read and interpret engineering drawings, internal or external, including Dimensions, GD&T (Geometric Design and Tolerance), Parts Lists, Bills of Materials, Revisions & Changes
• Ability to operate complex measuring equipment such as Laser Measuring devices, surface profilometer, Coordinate Measuring Machine (CMM) etc. (Note: This does not require programming)
• Ability to use hand measurement tools such as height gages, calipers, micrometers, air gages, thread rings and plugs, pitch micrometers etc.
• Ability to complete routing forms and inspection documents and distribute as required .
• Ability to apply problem solving techniques to work with production personnel in solving potential product and process problems encountered during manufacturing.
• Ability to communicate effectively in a technical manner.
• Possess strong computer skills. MS Office (Emphasis in Excel), Google Drive & Google Suite
• Desire to improve themselves, the quality system and instill a quality mentality into co-workers.
• Ability to assist in the communication of the quality system requirements to other personnel.

WORKING CONDITIONS

• Adhere to all safety and quality system standards and principles.
• It is to be expected that the Quality Inspector understands that laboratory environments are to be kept clean and tidy.

PHYSICAL REQUIREMENTS

• Ability to occasionally lif t and/or move up to 50lbs safely.
• Must have dexterity in order to quickly sort through items and remove/replace the parts needed during the manufacturing process(es)
• Ability to use common hand and power tools.

Export Control Compliance Notice

This position may involve access to technology or software source code subject to U.S. export control laws (ITAR/EAR). Employment is contingent on verifying U.S. Person status or obtaining any necessary export license/confirming the availability of a license exception. Applicants must provide information for export control screening, which will be reviewed for compliance. DC Machine may elect not to pursue a license or exception and may decline to proceed with an applicant on that basis.

2nd shift:
Monday-Thursday, 3:20pm-2:00am