QC Lab Technician

Metromont LLC; Northern (KY); Hybrid; USD 36,000 - 48,000; Full time

Job summary

Metromont LLC in Hiram is seeking a QC Lab Technician to support the Quality Control department. You will handle mold test specimens, prepare aggregates samples, and record data accurately.

The role requires reading blueprints, using tape measures, Excel, and working as part of a safety-conscious team on a daytime schedule.

Qualifications

• Reading, writing and math skills are required.
• Ability to read a tape measure to 1/16".
• Basic blueprint and plans reading.
• Computer literate with Excel experience.
• Precise data recording and measurements.

Responsibilities

• Collect and remove mold test specimens from the previous day.
• Remove cylinders that need to be broken down for curing tanks.
• Prepare aggregates samples by oven-drying, splitting, weighing and recording in the system.
• Make 12x12 color samples as needed.
• Break tank specimens after drying and record in the system.
• Assist in testing wet concrete (air, slump, temperature, unit weight).
• Produce test specimens (cylinders) as required.
• Work as part of a team.
• Participate in 6S, Lean and Safety Programs.

Skills

Reading/Writing/Math

Tape measure 1/16"

Blueprint reading

Excel proficiency

Data recording accuracy

Attention to detail

Tools

Cylinder tanks

Hammer

Chipping Hammer

Scrapper

Margin trowel

Water Brush

Hand Float

Computer

Job description

JOB OUTLINE

LOCATION: Hiram

TITLE / POSITION: QC Lab Technician

DEPARTMENT: QUALITY CONTROL

SUPERVISOR(S): TERRY SNOW

REVIEW DATE: 02/19/09

• Climbing: n/a
• Repetitive Motion / Force: 5%

% based on a 10 hour shift

PHYSICAL REQUIREMENTS

• Lifting / Lbs: 40% / 50-75lbs
• Bending: 40%
• Pushing / Pulling: 10%
• Standing / Walking: 100%
• Twisting: 30%

PPE REQUIRED: Gloves, hard hat, Steel toe boots, Safety Glasses, Ear plugs, High visibility vest, At time and for certain tasks, elbow length gloves.

EQUIPMENT / TOOLS: Cylinder tanks, Hammer, Chipping Hammer, Scrapper, Margin trowel, Water Brush, Hand Float, Computer

SKILLS REQUIRED: Advanced Reading, writing and math skills, able to read a tape measure to 1/16th, Basic Blue print and plans reading, Computer literate with experience in Excel, Précis with measurements, Accurate with data recording, very detail orientated to meet minimal specification with precision.

LOCATION: Map code

Indoor/sheltered (): Outdoor/non sheltered ( X )

HOURS: 8am – 4pm Mon-Fri

DESCRIPTION OF DUTIES

• Collect and remove from mold test specimens from previous day
• Remove cylinders that needed to be broken down for curing tanks
• Perform aggregates (rock /Sand) radiations which includes put test sample in oven and dry, run through splitter, weigh, put in shaker, weigh each breakdown and enter data in system.
• Make 12x12 color samples as needed
• Break tank specimens after drying, record breaks in system
• Assist in testing wet concrete ( air, slump, temperature, and unit weight)
• Make test specimens9cylinders0 as needed
• Must work as part of a team
• Actively participate in companies “6S”, “Lean” and Safety Programs

TRAINING: General Safety Orientation, BMP Training, E.A.P, Electrical Safety awareness, Forklift certification, Haz Com, Overhead Crain Training, P.T., Respirator, PFT & Fit testing, S.W.SP.O.O., Safe lifting procedures, Torch Safety Training, Specialty QC Equip samples & breaks, PCI & ACI certification

PROGRESSION: Pre Pour/ Post Pour Inspector

This job description is NOT intended to be all inclusive.

Employee may perform other related duties as needed to meet the ongoing needs of the facility.

APPROVED BY:

HR:

SAFETY:

PLANT: