Programmer, CNC 2

Jamco Interiors; Everett (WA); On-site; USD 70,000 - 110,000; Full time

Benefits offered by this job

Medical Coverage

401(k) Retirement Savings Plan

Paid Time Off

Wellness Program

Job summary

Jamco Interiors independently develops, verifies, implements, and improves CNC programs and machining processes for production and new product introduction. Provides programming ownership, resolves complex machining issues, and improves quality, reliability, cycle time, and manufacturability with limited supervision.

Independently develops, verifies, implements, and improves CNC programs and machining processes for production and new product introduction.

Qualifications

• Technical degree or equivalent experience preferred, with typically 3–5 years CNC machining/programming experience.
• Proficiency with CAD/CAM software, G-code, CNC programming, cutting tools, workholding, feeds/speeds, tolerances, GD&T, and 3D CAD data.
• Experience independently developing and proving out multi-axis CNC programs; 5-axis, mill-turn, horizontal machining, and simulation experience strongly preferred.

Responsibilities

• Create and maintain CNC programs for 3-, 4-, and 5-axis machining centers, lathes, routers, water jets, and other CNC equipment.
• Develop complete CAD/CAM programming solutions, including machining sequences, tool paths, tooling, workholding, feeds/speeds, post-processing, simulation, and setup documentation.
• Read and apply engineering drawings, specifications, tolerances, GD&T, bills of material, and 3D CAD data.
• Lead program prove-out and validation, including tool motion, clearances, dimensional results, probing, tool life, cycle performance, and repeatability.
• Troubleshoot programming and machining issues involving tool paths, post output, tooling, chatter, surface finish, dimensional variation, workholding, and cycle time.
• Optimize tool paths, setups, tooling, and programming methods to improve quality, productivity, reliability, and cycle time.
• Review designs for machinability and recommend improvements related to tooling, access, datums, tolerances, and manufacturing processes.
• Create and maintain setup sheets, tooling lists, work offsets, program revisions, and related production documentation.
• Support first article, new product introduction, engineering changes, root-cause/corrective-action activities, and production readiness.
• Collaborate with Engineering, Quality, Operations, Planning, and shop personnel to resolve manufacturing and programming issues.
• Provide technical guidance and mentoring to CNC operators, machinists, and less experienced programmers.
• Follow established safety, quality, program-control, and configuration-management requirements.

Skills

CNC programming

G-code

CAD/CAM software

5-axis machining

GD&T

CNC controls

Education

Technical degree or equivalent

Tools

Post-processing

Machining simulation

3D CAD data

Job description

Summary

Independently develops, verifies, implements, and improves CNC programs and machining processes for production and new product introduction. Provides programming ownership, resolves complex machining issues, and improves quality, reliability, cycle time, and manufacture ability with limited supervision.

Essential Duties & Responsibilities

• Create and maintain CNC programs for applicable 3-, 4-, and 5-axis machining centers, lathes, routers, water jets, and other CNC equipment.
• Develop complete CAD/CAM programming solutions, including machining sequences, tool paths, tooling, workholding, feeds/speeds, post-processing, simulation, and setup documentation.
• Read and apply engineering drawings, specifications, tolerances, GD&T, bills of material, and 3D CAD data.
• Lead program prove-out and validation, including tool motion, clearances, dimensional results, probing, tool life, cycle performance, and repeatability.
• Troubleshoot programming and machining issues involving tool paths, post output, tooling, chatter, surface finish, dimensional variation, workholding, and cycle time.
• Optimize tool paths, setups, tooling, and programming methods to improve quality, productivity, reliability, and cycle time.
• Review designs for machinability and recommend improvements related to tooling, access, datums, tolerances, and manufacturing processes.
• Create and maintain setup sheets, tooling lists, work offsets, program revisions, and related production documentation.
• Support first article, new product introduction, engineering changes, root-cause/corrective-action activities, and production readiness.
• Collaborate with Engineering, Quality, Operations, Planning, and shop personnel to resolve manufacturing and programming issues.
• Provide technical guidance and mentoring to CNC operators, machinists, and less experienced programmers.
• Follow established safety, quality, program-control, and configuration-management requirements.

FLSA Status: Non-Exempt

Summary

Independently develops, verifies, implements, and improves CNC programs and machining processes for production and new product introduction. Provides programming ownership, resolves complex machining issues, and improves quality, reliability, cycle time, and manufacture ability with limited supervision.

Essential Duties & Responsibilities

• Create and maintain CNC programs for applicable 3-, 4-, and 5-axis machining centers, lathes, routers, water jets, and other CNC equipment.
• Develop complete CAD/CAM programming solutions, including machining sequences, tool paths, tooling, workholding, feeds/speeds, post-processing, simulation, and setup documentation.
• Read and apply engineering drawings, specifications, tolerances, GD&T, bills of material, and 3D CAD data.
• Lead program prove-out and validation, including tool motion, clearances, dimensional results, probing, tool life, cycle performance, and repeatability.
• Troubleshoot programming and machining issues involving tool paths, post output, tooling, chatter, surface finish, dimensional variation, workholding, and cycle time.
• Optimize tool paths, setups, tooling, and programming methods to improve quality, productivity, reliability, and cycle time.
• Review designs for machinability and recommend improvements related to tooling, access, datums, tolerances, and manufacturing processes.
• Create and maintain setup sheets, tooling lists, work offsets, program revisions, and related production documentation.
• Support first article, new product introduction, engineering changes, root-cause/corrective-action activities, and production readiness.
• Collaborate with Engineering, Quality, Operations, Planning, and shop personnel to resolve manufacturing and programming issues.
• Provide technical guidance and mentoring to CNC operators, machinists, and less experienced programmers.
• Follow established safety, quality, program-control, and configuration-management requirements.

Qualifications

• Technical degree, certificate, apprenticeship, or equivalent experience preferred, with typically 3–5 years of CNC machining/programming experience.
• Proficiency with CAD/CAM software, G-code, CNC programming, cutting tools, workholding, feeds/speeds, tolerances, GD&T, and 3D CAD data.
• Experience independently developing and proving out multi-axis CNC programs; 5-axis, mill-turn, horizontal machining, and simulation experience strongly preferred.
• Working knowledge of common CNC controls such as Fanuc, Siemens, Heidenhain, Okuma, Mazak, Mitsubishi, or similar.
• Working knowledge of machining mathematics, geometry, trigonometry, and English/metric measurement systems.
• Strong technical problem-solving, documentation, communication, and continuous improvement skills.
• Successful completion of required pre-employment drug screening and criminal background check.

Physical Demands & Work Environment

Work is performed in office and manufacturing environments with regular machine-shop interaction and exposure to typical shop conditions. Domestic or international travel may be required.

Jamco is passionate about providing a competitive and comprehensive benefits package and pleased to offer the following to eligible employees-

• Medical Coverage
• Dental and Vision Reimbursement
• 401(k) Retirement Savings Plan
• Benefit Conversion at Termination
• Bereavement Leave
• Educational Assistance
• Family and Medical Leave
• Paid Parental Leave (40 hours) *Qualifying event after June 15th, 2022
• Flexible Benefit Plan (Flex Spending)
• Holidays
• Jury Duty/Witness Service Leave
• Life Insurance
• Long-Term Disability
• Short-Term Disability
• Pregnancy Leave
• Paid Time Off (PTO)
• Personal Leave
• Wedding Leave
• Wellness Program/Gym Reimbursement
• Pet Insurance

Jamco is an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without discrimination based on protected status. Reasonable accommodations will be provided in accordance with the Americans with Disabilities Act (ADA).