Production Support Technician

IDEX Corporation

West Jordan (UT)

On-site

USD 42,000 - 52,000

Full time

10 days ago

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

IDEX Corporation is seeking a Production Support Technician to prepare materials for assembly, manage kitting, and ensure accurate part availability. You will verify part numbers, stage kits for technicians, and maintain clean, organized work areas following 5S and safety standards.

The role emphasizes attention to detail, ability to read work instructions, and experience with ERP or inventory systems, with opportunities to contribute to continuous improvement in a manufacturing environment.

Qualifications

  • High School Education or equivalent required.
  • Ability to follow verbal and written instructions.
  • Ability to read and follow work instructions, BOMs, and production documentation.
  • Good eye-hand coordination.
  • Impeccable attention to detail.
  • Experience with ERP or inventory management systems.
  • Experience in a production / manufacturing setting or component fabrication preferred.
  • Familiarity with kitting, inventory control, or production support activities preferred.

Responsibilities

  • Review work orders, BOMs, and production schedules to prepare assembly kits.
  • Pull required components and materials from inventory locations.
  • Verify part numbers, quantities, and revisions prior to kitting.
  • Organize and stage complete kits for technicians according to production priorities.
  • Clean, wash, and prepare parts and components according to established procedures and quality standards.
  • Inspect parts for damage, contamination, or discrepancies and report concerns to Quality or Production leadership.
  • Replenish assembly areas with consumables and commonly used components.
  • Maintain accurate inventory transactions and material movements within applicable inventory systems.
  • Assist in maintaining inventory accuracy through cycle counts and stock audits.
  • Ensure materials are properly identified, labeled, and stored.
  • Maintain clean and organized work areas in accordance with 5S and safety standards.
  • Follow all company safety, quality, and operational procedures.
  • Support continuous improvement initiatives focused on efficiency, quality, and workflow.
  • Perform other related duties as assigned.

Skills

Attention to detail
Eye-hand coordination
Instruction following

Education

High School Education or equivalent

Tools

ERP / inventory management systems

Job description

If you’re looking for a special place to build or grow your career, you’ve found it. Whether you’re an experienced professional, a recent college graduate or somewhere in between, IDEX is a place where you can apply your existing skills and learn new ones in an environment where you can make an impact.

With interesting opportunities in engineering, marketing, sales, supply chain, operations, HR, finance, and more across more than 40 diverse businesses (https://www.idexcorp.com/our-businesses/business-segments/) around the globe, chances are, we have something special for you.

The Production Support Technician is responsible for preparing materials and components for assembly operations through kitting, cleaning, and staging activities. This role ensures technicians have the correct parts, components, and materials available to efficiently build products while maintaining quality, accuracy, and workplace organization standards.

KEY RESPONSIBILITIES
  • Review work orders, bills of materials (BOMs), and production schedules to prepare assembly kits.

  • Pull required components and materials from inventory locations.

  • Verify part numbers, quantities, and revisions prior to kitting.

  • Organize and stage complete kits for technicians according to production priorities.

  • Clean, wash, and prepare parts and components according to established procedures and quality standards.

  • Inspect parts for obvious damage, contamination, or discrepancies and report concerns to Quality or Production leadership.

  • Replenish assembly areas with consumables and commonly used components.

  • Maintain accurate inventory transactions and material movements within applicable inventory systems.

  • Assist in maintaining inventory accuracy through cycle counts and stock audits.

  • Ensure materials are properly identified, labeled, and stored.

  • Maintain clean and organized work areas in accordance with 5S and safety standards.

  • Follow all company safety, quality, and operational procedures.

  • Support continuous improvement initiatives focused on efficiency, quality, and workflow.

  • Perform other related duties as assigned.

OTHER JOB FUNCTIONS
  • Understanding of manufacturing processes and material flow.

  • Ability to accurately count, verify, and organize parts.

  • Strong attention to detail and quality.

  • Effective communication and teamwork skills.

  • Ability to prioritize work based on production demands.

  • Commitment to safety and continuous improvement.

  • undefined

PHYSICAL ACTIVITIES REQUIRED TO PERFORM ESSENTIAL FUNCTIONS
  • Ability to: lift and carry up to 50 pounds frequently, write by hand, basic computer skills, and operate simple hand tools used to assemble and torque parts.

  • Ability to communicate by speech and hearing continuously. Communication is in person.

  • Visual acuity is needed for close detail work; computer use and reading assembly drawings and work instructions.

  • Ability to stand and walk for extended periods.

  • Ability to safely use cleaning equipment and tools associated with part preparation.

  • Frequent reaching, bending, twisting, and handling of components.

JOB CONDITIONS
  • General manufacturing environment.

  • Cleanroom manufacturing environment.

  • May require working with hazardous substances such as but not limited to Acetone and Isopropyl Alcohol.

QUALIFICATIONS
  • High School Education or equivalent required.

  • Ability to follow verbal and written instructions.

  • Ability to read and follow work instructions, bills of materials, and production documentation.

  • Good eye-hand coordination.

  • Impeccable attention to detail.

  • Experience with ERP or inventory management systems.

  • Experience in a production / manufacturing setting or component fabrication preferred.

  • Familiarity with kitting, inventory control, or production support activities preferred.

Are you ready to join a different kind of company where our people, our culture, and our commitments are centered around providing trusted solutions that improve lives around the world?

IDEX is an Equal Opportunity Employer . IDEX gives consideration for employment to qualified applicants without regard to race, color, religion, creed, genetic information, sex, sexual orientation, gender identity or expression, marital status, age, national origin, disability, protected veteran status, or any other consideration or protected category made unlawful by federal, state or local laws.

Attention Applicants: If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, please let us know. Likewise, if you are limited in the ability to access or use this online application process and need an alternative method for applying, we will determine an alternate way for you to apply. Please contact our Talent Acquisition Team at lfcareers@idexcorp.com for assistance with an accommodation. These contact tools may be used only by individuals with a disability for accommodation requests. Do not inquire as to the status of an application.

Job Family: Operations

Business Unit: Trebor

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Production Support Technician
Production Support Technician

Trebor International, Inc. • West Jordan (UT)

On-site
USD 32,000 - 52,000
Production Supervisor
Production Supervisor

Band-IT Co Ltd • Denver (CO)

On-site
USD 76,000 - 114,000
Health benefits
401(k) with company match
PTO and more
Production Support Technician
Production Support Technician

Trebor International, Inc. • West Jordan (UT)

On-site
USD 32,000 - 52,000
Leadperson Machine Shop
Leadperson Machine Shop

Viking Pump, Inc. • Cedar Falls (IA)

On-site
USD 25,000 - 39,000
Material Handler
Material Handler

Airtech Vacuum • Rutherford (NJ)

On-site
USD 28,000 - 39,000
Material Process Operator
Material Process Operator

IDEX Corporation • City of Rochester (NY)

Hybrid
USD 28,000 - 39,000
Health benefits
401(k) match
PTO
Material Process Operator
Material Process Operator

Pulsafeeder Engineered Products • City of Rochester (NY)

On-site
USD 33,000 - 36,000
Manufacturing Production Utility Worker - 2nd Shift (10% shift differential pay)
Manufacturing Production Utility Worker - 2nd Shift (10% shift differential pay)

IDEX Corporation • Farmington (CT)

On-site
USD 18,000 - 29,000
Health benefits
401(k) with company match
PTO
Material Handler
Material Handler

Airtech Vacuum • Linthicum (MD)

On-site
USD 29,400 - 44,000
Health benefits
401(k) retirement program with company match
Paid Time Off (PTO)
Manufacturing Production Utility Worker - 2nd Shift (10% shift differential pay)
Manufacturing Production Utility Worker - 2nd Shift (10% shift differential pay)

Mott Corporation • Farmington (CT)

On-site
USD 24,000 - 34,000
Health benefits
401(k) retirement savings program with
PTO