Production Manager

FRUEHAUF

Bowling Green (KY)

On-site

USD 90,000 - 120,000

Full time

6 days ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

FRUEHAUF in Bowling Green, KY, seeks a Production Manager to lead lean transformation across trailer assembly. You will convert schedules into executable plans, develop frontline leaders, and partner with Materials, Quality, Engineering, and Maintenance to remove constraints and drive measurable gains.

You will design standard work, implement 5S/visual management, lead cross-functional kaizen, and build capacity to reach 15 trailers per day while maintaining safety, quality, and schedule

Qualifications

  • Demonstrated ability to lead lean change in a labor-intensive assembly environment with standard work, line balancing, takt analysis, and one-piece flow.
  • Strong knowledge of production planning, labor capacity, assembly drawings, quality controls, tooling/fixtures, and safety; trailer or heavy-equipment assembly knowledge preferred.

Responsibilities

  • Translate master build schedule into daily/weekly production plans aligning labor, capacity, tooling, work instructions, and material readiness across all assembly areas.
  • Lead a consistent daily management cadence with supervisor huddles, plan-vs-actual reviews, and timely recovery actions for shortages, downtime, quality issues, and staffing gaps.
  • Use station cycle times and capacity analysis to reduce bottlenecks and WIP, and to minimize trailer waiting time and variation between stations.
  • Coordinate trailer sequence, staffing changes, and recovery priorities with Planning and Materials; communicate realistic production commitments and risks to Plant Manager.
  • Own a practical lean transformation roadmap from departmental to one-piece trailer flow with milestones and verified improvements.
  • Establish station-level standard work with supervisors and Engineering including safe task sequences, target cycle time, labor content, and in-process quality checks.
  • Implement and sustain 5S, FIFO, and visual management to make conditions visible and controllable.
  • Lead kaizen and root-cause problem solving; validate countermeasures and audit sustainability.
  • Develop operational capacity roadmap to support future-state goal of 15 trailers per production day.

Skills

Lean change leadership
Line balancing
Takt/cycle-time analysis
One-piece flow
5S & visual management
Root-cause problem solving
Coaching & leadership
Excel & ERP reporting

Education

Bachelor's degree in Operations/Manufacturing/Engineering

Tools

ERP systems
Excel

Job description

Description

Lean Manufacturing & Trailer Assembly Transformation

JOB SUMMARY

The Production Manager leads all trailer assembly operations through Production Supervisors and is accountable for safe, high-quality, predictable output and the systematic transformation of how trailers are built. The role develops a stable production system built on one-piece flow, balanced work content, standardized work, quality at the source, visual management, and disciplined daily problem solving. The Manager converts the production schedule into an executable operating plan, develops frontline leaders, and partners with Materials, Quality, Engineering, Maintenance, and other support functions to eliminate constraints and sustain measurable gains.

REPORTING RELATIONSHIP

Reports to: Plant Manager | Direct reports: Production Supervisors and assigned production leadership

KEY RESPONSIBILITIES

Own production execution and plantwide flow

  • Translate the master build schedule into daily and weekly production plans that align labor, station capacity, tooling, work instructions, and material readiness across all assembly areas.
  • Lead a consistent daily management cadence: supervisor huddles, plan-versus-actual reviews, visible escalation of abnormalities, and timely recovery actions for shortages, downtime, quality issues, and staffing gaps.
  • Use measured station cycle times, takt requirements, capacity analysis, and work-content balance to reduce bottlenecks, trailer waiting time, excessive work-in-process (WIP), and variation between stations.
  • Coordinate trailer sequence, staffing changes, and recovery priorities with Planning and Materials; communicate realistic production commitments and risks to the Plant Manager.

Design and sustain the lean manufacturing system

  • Own a practical lean transformation roadmap from departmental, batch-oriented work toward repeatable, one-piece trailer flow; define milestones, responsible owners, and verified performance improvements.
  • Establish station-level standard work with supervisors and Engineering, including safe task sequence, target cycle time, labor content, required tools/materials, in-process quality checks, and transfer criteria.
  • Implement and sustain 5S, point-of-use material delivery, FIFO, clear WIP controls, line-side visual management, and other methods that make normal and abnormal conditions immediately visible.
  • Lead cross-functional kaizen and root-cause problem solving; validate countermeasures at the point of work, document new standards, and audit sustainability rather than relying on one-time fixes.
  • Develop the operational capacity roadmap needed to support the plant’s future-state goal of 15 trailers per production day, based on validated cycle times and approved labor, material, equipment, and quality capabilities.

Lead safety, quality and operating performance

  • Hold supervisors accountable for safe work, hazard identification, proper PPE, equipment safeguards, safe trailer access, and prompt corrective action.
  • Partner with Quality to establish quality-at-the-source checks, defect containment, first-pass quality improvement, and permanent corrective action on recurring assembly defects and rework.
  • Own production labor deployment, overtime control, labor hours per trailer, schedule attainment, station performance, and accurate reporting; use trends to improve productivity without compromising safety or quality.
  • Make the shop floor the primary management workplace: observe actual assembly work, verify standards, coach problem solving, and remove systemic barriers to performance.

Develop supervisors and a capable workforce

  • Set clear responsibilities and measurable expectations for Production Supervisors; coach them to lead daily flow, train to standard, solve problems at the source, and build accountable teams.
  • Maintain succession, onboarding, cross-training, and skills-matrix plans so labor can be deployed flexibly without losing process discipline or workmanship.
  • Build a respectful, high-trust operating culture in which employees raise concerns early, improvement ideas are acted upon, and performance or conduct issues are addressed fairly and promptly.

Coordinate cross-functional improvements and investments

  • Work with Materials, Purchasing, Planning, Quality, Engineering, and Maintenance to establish reliable material presentation, equipment availability, engineering change readiness, and clear escalation paths.
  • Identify tooling, fixtures, ergonomic improvements, automation, and capital needs; develop operational justifications based on capacity, labor savings, safety, quality, and payback, and support implementation and commissioning.
PERFORMANCE EXPECTATIONS

Performance is evaluated against targets set with the Plant Manager, including: trailers completed versus daily/weekly plan; readiness and schedule attainment; station cycle time versus takt; output and capacity improvement; labor hours per trailer and overtime; first-pass quality and rework; WIP and production interruptions; safety and corrective-action closure; standard-work adherence; and supervisor/employee training progress. The Manager is accountable for a visible improvement plan with documented results and sustained operating controls—not output achieved through chronic expediting or excessive overtime.

KNOWLEDGE, SKILLS & ABILITIES
  • Demonstrated ability to lead lean change in a labor-intensive assembly environment; practical command of standard work, line balancing, takt/cycle-time analysis, one-piece flow, 5S, visual management, and structured root-cause problem solving.
  • Strong knowledge of production planning and labor capacity, assembly drawings and specifications, quality controls, tooling/fixture needs, and industrial safety; trailer or heavy-equipment assembly knowledge preferred.
  • Effective coaching, conflict resolution, cross-functional coordination, data interpretation, and written/verbal communication; competent with Excel and production/ERP reporting systems.
EXPERIENCE & EDUCATION
  • Five or more years of progressive manufacturing/assembly leadership experience, including experience directing supervisors or multiple production areas, preferred.
  • Documented results improving throughput, labor efficiency, product quality, or flow through people-centered process improvement strongly preferred.
  • Bachelor’s degree in Operations, Manufacturing, Engineering, or a related field preferred; equivalent hands-on manufacturing leadership experience considered.
PHYSICAL & WORK ENVIRONMENT

Frequent presence on the production floor, with extended walking and standing; occasional bending, climbing stairs or approved access equipment, and movement in or around trailers. Exposure to industrial noise, seasonal heat, and changing production demands. Essential functions may be performed with reasonable accommodation, as applicable.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Production Supervisor
Production Supervisor

FRUEHAUF • Bowling Green (KY)

On-site
USD 65,000 - 85,000
Production Process Supervisor - Final Assembly 3rd Shift
Production Process Supervisor - Final Assembly 3rd Shift

XL Specialized Trailers • Manchester (IA)

On-site
USD 65,000 - 90,000
Production Supervisor
Production Supervisor

Aero Industries, Inc. • Indianapolis (IN)

On-site
USD 65,000 - 90,000
Medical, dental, vision insurance
401(k) retirement plan with company‑s匹
PTO and paid holidays
+2
Production Process Supervisor - Final Clean/Final Paint 2nd Shift
Production Process Supervisor - Final Clean/Final Paint 2nd Shift

XL Specialized Trailers • Manchester (IA)

On-site
USD 65,000 - 85,000
Senior Director of Operations
Senior Director of Operations

Big Tex Trailers • Batavia Township (OH)

On-site
USD 180,000 - 260,000
Production Process Supervisor - Weld Department 1st Shift
Production Process Supervisor - Weld Department 1st Shift

XL Specialized Trailers • Manchester (IA)

On-site
USD 60,000 - 78,000
Third Shift Production Supervisor
Third Shift Production Supervisor

Novae • Markle (IN)

On-site
USD 55,000 - 75,000
Production Manager
Production Manager

Lucas James Talent Partners • New Castle (PA)

On-site
USD 85,000 - 120,000
Production Manager
Production Manager

The Big Blue Box • Dallas (TX)

On-site
USD 95,000 - 125,000
Production Manager
Production Manager

IEWC • City of Rochester (NY)

On-site
USD 75,000 - 120,000