Process Technician - Shift Supervisor (3rd Shift)

TriMas Corporation; Michigan; On-site; USD 48,000 - 55,000; Full time

Benefits offered by this job

Medical Insurance

Prescription Drugs

Dental Insurance

Vision Insurance

Flexible Spending Accounts

Life Insurance

Short-Term Disability

Long-Term Disability Insurance

Employee Assistance Plan

Paid Time Off

Retirement Plan

Voluntary Benefits

Job summary

Omega Plastics Inc is seeking a Process Technician – Shift Supervisor for the 3rd shift in Clinton Township, MI. You will lead the on-site 3rd shift team, manage daily production, and drive safety, quality, and efficiency to meet on-time delivery.

This role requires 5+ years in plastic injection molding with supervisory experience, strong problem-solving skills, and familiarity with ISO13485/ERP systems. Competitive hourly pay and shift premium are offered.

Qualifications

• Plastic injection molding experience required; 5+ years with 3+ years in leadership.
• High school diploma desired.
• Six Sigma/Lean leadership training desired.
• RJG or Paulson training strongly desired.
• ISO environment experience desirable; ISO 13485 a plus.
• Current forklift certification or ability to pass certification.
• Strong communication and organizational skills.
• Experience with Epicor ERP and MS Office a plus.

Responsibilities

• Lead and mentor shift team to meet safety, quality and production goals.
• Oversee daily production schedule and improve uptime.
• Train operators on work instructions and SOPs.
• Monitor quality, scrap, and cycle times; escalate non-conformances.
• Ensure ISO/IQMS documentation is complete and up to date.
• Maintain records and provide production performance reports.
• Perform mold, automation, and equipment set-ups.

Skills

Plastic molding

Leadership

supervisory phase

Communication skills

Six Sigma

Lean manufacturing

ISO experience

Forklift certified

Epicor ERP

MS Excel

MS Word

Education

High school diploma

Tools

Epicor ERP

Job description

Process Technician - Shift Supervisor (3rd Shift)

Company: Omega Plastics Inc

Primary Location: 24401 Capital Blvd, Clinton Township, MI 48036 USA

Workplace Type: On-site

Employment Type:Hourly | Full-Time

Function: Manufacturing Production / Distribution

Equal Opportunity Employer Minorities/Women/Veterans/Disabled

Main Duties & Responsibilities

Position Summary

The Process Technician – Shift Supervisor is responsible for executing the daily production schedule while overseeing and guiding the 3rd shift team to ensure on-time delivery, cycle time, scrap, and quality targets are met. This role ensures all machines are operating efficiently, safely, and within quality standards, with special attention to escalation procedures, defect tracking, and BHR compliance. The Process Technician – Shift Supervisor leads and develops the team, troubleshoots and resolves production issues as they arise, and drives continuous improvement efforts to optimize productivity and minimize downtime.

This position is for our 3rd Shift: Monday-Friday with some weekends 11:30pm-8:00am.

Primary Duties and Responsibilities

Leadership & People Management

• Uphold and communicate the purpose, principles, and vision of TriMas.
• Lead, train, and mentor the team ensuring high performance and adherence to safety, quality, and production goals.
• Train and/or ensure training has been performed and is current for all associates on work instructions and SOPs associated to their assignments before they are released; ensure problem solving at the press and escalation procedures are followed.
• Conduct effective and timely performance feedback and annual reviews.
• Assign direct reports (all operators) to manufacturing operations.
• Recommend and communicate working hours each week for direct reports; minimize indirect labor and overtime.
• Approve PTO for direct reports.
• Initiate disciplinary process; recommend hiring and terminations with the HR department.
• Recommend training to develop the team.

Production & Scheduling

• Know real-time status of items on the daily schedule and communicate as requested.
• Lead the daily shift meeting and ensure efforts are focused on commitments.
• Execute all items on the daily schedule and maximize quality product output during the shift.
• Continuously monitor and adjust molding processes to maximize efficiency, reduce waste, and meet production schedules; implement process improvements.
• Stop or start presses, assembly, and secondary operations as needed.
• Backup the scheduling position in the absence of the Materials Manager/Scheduler.
• Other specified duties as required by the Operations Manager.

Quality & Compliance

• Monitor product quality, scrap, and cycle times against target; resolve and elevate non-conformances.
• Verify that BHRs are complete and accurate before, during, and after production is complete.
• Ensure work instructions, target sheets, travelers, interruption logs, defective unit records, and critical parameter sheets are at the press and being completed properly during the run.
• Ensure Epicor scanning is accurate and up to date with good product, scrap, and non-conforming quantities.
• Ensure all ISO and IQMS documentation is complete and stored in proper locations.
• Ensure compliance with cleanroom procedures and processes (portable, main, and assembly), including completion of F-MFG-034.
• Maintain awareness of regulatory and customer requirements as they pertain to Omega’s clients, especially for medical clients (ref. ISO 13485).
• Adjust processes to ensure products meet quality standards and production timelines.

Safety & Environment

• Follow procedures which promote a workplace where safety and environmental concerns are addressed to meet OSHA and EPA regulations.
• Ensure safety and cleanliness of the work environment in compliance with state and federal requirements.

Process & Technical Responsibilities

• Perform mold, automation, and work cell set-ups.
• Perform all resin material handling requirements.
• Advanced molding process troubleshooting; work closely with engineering, maintenance, supervisors, and quality departments to ensure smooth operation.
• Light molding machine PM work, including screw pulling.
• Minor automation troubleshooting.
• Advanced use of quality equipment for measurements and advanced print reading.
• Assist with validation activities.

Reporting & Documentation

• Maintain accurate records of process parameters, production logs, and equipment maintenance.
• Provide regular reports on production performance and issues to management.
• Daily performance tracking: report and review operation results daily with the Operations Manager.

Physical Demands/Work Environment

• Work performed in a manufacturing plant and cleanroom environment.
• Requires normal mobility to move around the office and manufacturing environment.
• This role involves occasional work on a computer.
• Frequently exposed to varying temperatures within the plant; noise levels may be loud at times.
• Frequently walks, stands, grips/grasps, bends/stoops, crouches, and lifts and carries up to fifty-five (55) lbs.

On-Site: This role is required to be on-site 5-6 days at the Clinton Township, MI location.

Qualifications

Qualifications and Skills

• Minimum of 5+ years of experience in plastic injection molding manufacturing, with at least 3+ years in a supervisory or leadership role.
• High school diploma desired.
• Formal education in Six Sigma, Lean, and leadership strongly desired.
• RJG or Paulson training strongly desired.
• Experience in an ISO environment is desirable; familiarity with ISO 13485 a plus.
• Current forklift certification or ability to pass certification.
• Strong communication skills: verbal and written.
• Strong organizational skills with the ability to successfully manage multiple tasks within established and changing deadlines.
• Excellent problem resolution and lean manufacturing skills.
• Process and results-driven with a positive, self-motivated attitude.
• Demonstrates the ability to lead a team while living out TriMas' principles and aligning to organizational values.
• Working knowledge of Epicor ERP system, as well as Microsoft Word and Excel, a plus.

Compensation

The expected pay range for this position is $35.00-$40.00/hour. This position qualifies for a shift premium.

Compensation can vary depending on several factors, including a candidate's qualifications, skills, experience, competencies, and geographic location.

Benefits

Benefit offerings include Medical Insurance and Prescription Drugs, Dental Insurance, Vision Insurance, Flexible Spending Accounts, Life Insurance, Short-Term Disability, Long-Term Disability Insurance (for eligible employees), Employee Assistance Plan (EAP), Paid Time Off (may include vacation and sick time), Retirement Program, and Other Voluntary Benefits.