Process Technician

Rust Belt Recruiting

Lordstown (OH)

On-site

USD 39,000 - 50,000

Full time

2 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Rust Belt Recruiting seeks an experienced Process Technician to develop, monitor, and optimize injection molding processes in a high-volume facility. You will troubleshoot complex molding issues, set precise parameters, and support continuous improvement initiatives across the shift.

The role requires strong technical knowledge of polymers, materials handling, and robotics, with duties spanning setup, validation, and real-time process adjustments.

Qualifications

  • High School Diploma, GED, or equivalent; technical degree preferred.
  • 3+ years of plastic injection molding processing experience in a custom environment.
  • Strong understanding of polymer behavior, resin characteristics, drying requirements, and materials.
  • Advanced troubleshooting and root cause analysis on the manufacturing floor.
  • Experience with automated systems and Cartesian/6-axis robots.
  • Familiarity with cavity pressure systems and scientific molding principles.
  • Excellent communication, time management, and organization.
  • Willingness to work afternoon shift and weekend overtime

Responsibilities

  • Set up, start up, and optimize injection molding machines to meet standards.
  • Adjust critical process parameters like temperatures, pressures and cycle times.
  • Troubleshoot molding defects such as short shots, flash, sink marks, burns.
  • Monitor production runs and make real-time data-driven adjustments.
  • Document standard operating conditions and process validation steps.
  • Coordinate with Mold Setters, Operators, and Quality staff for smooth flow.
  • Perform root cause analysis and corrective actions for issues.
  • Improve cycle times and reduce scrap through systematic optimization.
  • Support new mold trials, product launches, and automated cell setups.
  • Maintain process documentation, setup sheets, and daily logs

Skills

Injection molding experience
Troubleshooting & RCA
Robotics (Cartesian/6-axis)
Process monitoring software
Communication
Time management
Shift flexibility

Education

High School Diploma / GED / equivalent

Tools

Cartesian robots
6-axis robots

Job description

Process Technician

Shift: Afternoon shift (3:30 PM to midnight)

Salary: $28.00 - $36.00 per hour, depending on experience

Who we are

We are an established, privately-held custom plastic injection molding manufacturer with decades of experience delivering high-quality, precision-molded solutions. Operating a modern, certified facility, we proudly serve a diverse range of industries, including the automotive, consumer goods, and industrial equipment sectors. We pride ourselves on a culture of continuous improvement, manufacturing excellence, and providing end-to-end engineering support from design to final production.

Process Technician Role

The Process Technician is responsible for developing, monitoring, and optimizing injection molding processes to ensure consistent product quality, efficiency, and minimal downtime. This role involves troubleshooting complex molding issues, setting precise process parameters, and supporting continuous improvement initiatives in a high-volume custom manufacturing environment.

Process Technician Responsibilities
  • Set up, start up, and optimize injection molding machines to meet strict production and quality standards
  • Establish and adjust critical process parameters including temperatures, pressures, and cycle times
  • Troubleshoot complex molding defects such as short shots, flash, sink marks, and burns
  • Monitor ongoing production runs and make real-time, data-driven adjustments to maintain part quality
  • Conduct process validation steps and accurately document standard operating conditions
  • Coordinate closely with Mold Setters, Operators, and Quality personnel to ensure a smooth production flow across the shift
  • Perform root cause analysis and implement effective corrective actions for process-related issues
  • Improve cycle times, reduce scrap rates, and increase overall efficiency through systematic process optimization
  • Support new mold trials, product launches, and automated cell setups involving Cartesian or 6-axis robotics
  • Maintain accurate process documentation, setup sheets, and daily production logs
Process Technician Reporting Relationships

The Process Technician reports directly to the Shift Supervisor and does not have any direct reports. However, this position works collaboratively as a team player to assist Operators, Material Handlers, and Mold Setters as needed during shift operations.

About You
  • Possess a High School Diploma, GED, or equivalent experience (a technical degree is preferred)
  • Bring 3+ years of proven experience in plastic injection molding processing, specifically within a custom molding environment
  • Demonstrate a strong understanding of polymer behavior, resin characteristics, drying requirements, and a wide breadth of materials
  • Exhibit advanced troubleshooting, problem-solving skills, and the ability to execute root cause analysis on the manufacturing floor
  • Show proficiency with automated systems and secondary equipment, including Cartesian or 6-axis robots
  • Maintain familiarity with cavity pressure systems, scientific molding principles, and advanced process monitoring software
  • Possess strong communication, time management, and organizational skills to successfully meet production deadlines under pressure
  • Demonstrate the flexibility to support afternoon shift hours, including participating in weekend overtime rotations
Additional Information
Equal Opportunity Employer

Our company is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All employment decisions are based on business needs, job requirements, and individual qualifications, without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran status, or disability status.

Physical Demands & Working Conditions
  • Frequent lifting of up to 50 lbs with assistance or lifting equipment
  • Frequent standing, walking, bending, and twisting for extended periods across a production shift
  • Manual dexterity required to adjust machinery, tools, and enter controls
  • Continuous exposure to an industrial manufacturing environment including heat, noise, oils, and required personal protective equipment (PPE)
  • Ability to safely climb ladders and operate integrated machine interfaces
  • Candidates must pass a standard 9-panel background and drug screening protocol prior to employment
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Process Technician - Injection Molding
Process Technician - Injection Molding

Link Staffing • Texas

On-site
USD 36,000 - 44,000
Competitive pay
Overtime available
Growth opportunities
Process Technician
Process Technician

Rust Belt Recruiting • Clyde (OH)

On-site
USD 27,552 - 45,460
Process Technician 3rd shift (10 pm - 6 am)
Process Technician 3rd shift (10 pm - 6 am)

Wise Plastics Technologies • Illinois

On-site
USD 39,000 - 48,000
Sign-on bonus
Medical, dental, vision, life & short‑
401k with company match
+4
Process Technician - Plastics
Process Technician - Plastics

Le Sueur Inc. • Le Sueur (MN)

On-site
USD 52,000 - 68,000
Medical/dental insurance
Paid holidays (80-84 hours)
Flexible PTO/UTO policy
+7
Process Technician 3rd shift (10 pm - 6 am)
Process Technician 3rd shift (10 pm - 6 am)

Wise Plastics Technologies, Inc. • St. Charles (IL)

On-site
USD 39,000 - 48,000
Sign-on bonus
401k plan with company match
Paid time off
+5
Process Tech II
Process Tech II

Precision Elite Recruiting • Mebane (NC)

On-site
USD 25,000 - 36,000
Molding Process Technician
Molding Process Technician

Flex-N-Gate LLC. • Ionia (MI)

On-site
USD 24,796 - 38,572
Injection Molding Process Technician
Injection Molding Process Technician

Revere Plastics Systems, LLC • Fraser (MI)

On-site
USD 25,000 - 36,000
Competitive hourly pay
Comprehensive medical coverage / HSA
401(k) retirement plan
+3
Process Technician (Injection Molding)
Process Technician (Injection Molding)

Shelby American, Inc. • Houston (TX)

On-site
USD 40,000 - 70,000
Process Technician - Mold Setter
Process Technician - Mold Setter

Vandor Corporation • Richmond (IN)

On-site
USD 40,000 - 60,000
Medical insurance
Dental insurance
Vision insurance
+3