Process Engineering Manager

Van Grace Associates, LLC.

Meriden (CT)

On-site

USD 110,000 - 150,000

Full time

4 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Van Grace seeks a Process Engineering Manager to lead the engineering team responsible for process settings, tooling, and work instructions across extrusion, welding, corrugating, and cabling lines. You will drive first-pass yield, reduce scrap, and optimize line speed while introducing new products and equipment.

You will apply 8D, 5-Why, and fishbone methods to root-cause line issues, manage PFMEA and control plans, and ensure ISO 9001 compliance.

Qualifications

  • BS in Mechanical, Chemical, Materials, Electrical, Plastics, or Manufacturing Engineering.
  • 7+ years manufacturing engineering experience: wire and cable extrusion or continuous process.
  • 3+ years leading engineers and technicians.
  • Understand how process variation drives impedance, capacitance, return loss, and attenuation.
  • Hands-on use of SPC, process capability, gauge R&R, and DOE.
  • Working knowledge of PFMEA, control plans, 8D, and change control under ISO 9001.
  • Experience using Lean tools and six sigma, Pareto analysis, SMED, and standard work.

Responsibilities

  • Lead process engineers and technicians across all shifts.
  • Set priorities with Production and Quality; assign projects and develop skills in extrusion, welding, corrugating, statistics, and problem solving.
  • Provide technical coverage for line issues the shift cannot resolve.
  • Own process parameters, setup sheets, tooling, and work instructions for all products (foam, extrusion, copper tape forming, welding, corrugating, jacketing, braiding, taping, cabling).
  • Keep process/material specs and routings current in the BMS and SAP; ensure shifts follow documented processes.
  • Track first-pass yield, scrap, start-up waste, and line speed; perform Pareto analysis; reduce changeover scrap; raise line speeds; report savings against cost targets.
  • Lead root cause analysis on internal failures and customer complaints using 8D, 5-Why, and fishbone; disposition MRB material; verify fixes.

Skills

Lean
Six Sigma
Problem solving
Root cause analysis
PFMEA
8D
DOE
SPC
Change control

Education

BS in Mechanical/Materials/Manufacturing/Electrical Engineering

Tools

SAP
Microsoft Excel

Job description

Our client designs, manufactures premium cable solutions for commercial wireless networks, mission critical communications, private networks, Distributed Radio Systems (DRS) and other telecom markets

The Process Engineering Manager leads engineering team, owns the process settings, tooling, and work instructions for all lines, foam, air-dielectric coaxial cable, fiber optic hybrid cable, and jumper assemblies.

The Process Engineering Manager is accountable for first-pass yield, scrap, line speed, and electrical performance, bringing new products, new equipment, and transferred product lines into production.

The Process Engineering Manager is a hands-on leader using data to find and fix root causes

Responsivities:
  • Lead process engineers and technicians supporting all shifts.
  • Set priorities with Production and Quality, assign projects, review engineering work, and develop the team's skills in extrusion, welding and corrugating, statistics, and problem solving.
  • Provide technical coverage for line issues the shift cannot resolve.
  • Own the process parameters, setup sheets, tooling, and work instructions for all products including foam, solid insulation extrusion, copper tape forming, welding, and corrugating, jacketing, braiding, taping, and cabling.
  • Keep process and material specifications and routings current in the BMS and SAP, and make sure every shift runs to the documented process..
  • Track first-pass yield, scrap, start-up waste, and line speed by line and by product. Use Pareto analysis to rank losses, reduce changeover and start-up scrap through standard setups, raise line speeds where process allows, reduce copper, aluminum, compound, and gas usage. Report savings against an annual cost reduction target.
  • Lead root cause analysis on internal failures, customer complaints, and test failures using 8D, 5-Why, and fishbone methods. Disposition nonconforming material through MRB with Quality, write and close corrective actions on time, and verify that fixes hold.
  • Set up SPC on critical characteristics, including diameter, eccentricity, capacitance, and electrical test results. Run studies (Cp/Cpk), gauge R&R on in-line and lab measurement systems, design experiments to set process windows, use data from SAP, Cable Tracker, and the test database.
  • Own the PFMEAs and control plans for each product family, and support ISO 9001/14001, and UL audits and customer source inspection
Requirements:
  • BS degree in Mechanical, Chemical, Materials, Electrical, Plastics, or Manufacturing Engineering
  • 7+ years manufacturing engineering experience: wire and cable, extrusion, or continuous process, including 3+ years leading engineers and technicians.
  • Understand how process variation drives impedance, capacitance, return loss, and attenuation.
  • Hands-on use of SPC, process capability, gauge R&R, and DOE.
  • Working knowledge of PFMEA, control plans, 8D, and change control under ISO 9001. AS9100 s.
  • Experience using Lean tools and six sigma, Pareto analysis, SMED, and standard work
  • Proven ability to specify, justify, and commission new equipment and manage capital projects.
  • Microsoft Excel skills; SAP or other ERP experience is a plus
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Process Engineer - Wire /Cable
Process Engineer - Wire /Cable

Veracity Software Inc • Columbia (TN)

On-site
USD 80,000 - 100,000
Process Engineering Supervisor
Process Engineering Supervisor

AFL • Duncan (SC)

On-site
USD 110,000 - 140,000
Flexible time off policy
401(k) company match 4%
Tuition reimbursement programs
+3
Process Engineer
Process Engineer

Triton Environmental Consultants, Ltd. • Meriden (CT)

On-site
USD 90,000 - 120,000
Process Engineer
Process Engineer

Lightera • Carrollton (GA)

On-site
USD 65,000 - 85,000
Process Engineer - Manufacturing
Process Engineer - Manufacturing

EIS Wire & Cable Inc. • South Hadley (MA)

On-site
USD 85,000 - 115,000
Medical insurance
Dental
Vision
+10
Process Engineer - Manufacturing
Process Engineer - Manufacturing

EIS Wire & Cable, Inc • South Hadley (MA)

On-site
USD 90,000 - 120,000
Medical coverage
Dental
Vision
+10
Manufacturing Process Engineer
Manufacturing Process Engineer

Ksaria Corporation • Hudson (NH)

On-site
USD 80,000 - 110,000
Great benefits
PTO
401(k)
+1
Process Engineer
Process Engineer

Brightpath Associates LLC • Colchester (VT)

On-site
USD 70,000 - 95,000
Process Engineer - Extrusion
Process Engineer - Extrusion

Prysmian • Windham (CT)

On-site
USD 85,000 - 110,000
Cable Manufacturing Engineer
Cable Manufacturing Engineer

StarrTrax Recruiting • Sturbridge (MA)

On-site
USD 90,000 - 120,000