Process Engineer

MRPC

Milwaukee (WI)

On-site

USD 85,000 - 110,000

Full time

3 hours ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

MRPC, a longstanding medical device supplier in Milwaukee, seeks a Process Engineer to own the molding process from first shot through validated production. You’ll optimize rubber and plastic molding, drive data-driven improvements, and raise process capability year over year.

You’ll partner with Project Engineering, Tooling and Quality to release production-ready jobs, lead DOE studies, apply SPC, and mentor technicians and engineers across sites.

Qualifications

  • B.S. degree in a relevant engineering discipline plus 5+ years hands‑on process engineering in molding.
  • Experience with rubber/elastomer molding (compression, transfer or LSR) and/or thermoplastic injection molding.
  • Scientific molding knowledge applied on the production floor.
  • Experience with IQ/OQ/PQ, DOE, PFMEA, Control Plans and change control.
  • Strong statistical skills (SPC, capability, MSA) with Minitab or similar software.
  • Solid understanding of polymer/elastomer behavior and mold design basics (gating, venting, runners).
  • Mentor mindset with clear communication and ownership attitude.
  • Bonus: RJG Master Molder cert, medical device/cleanroom experience (ISO 13485/FDA).

Responsibilities

  • Launch new jobs right the first time by coordinating with Project Engineering, Tooling and Quality.
  • Build robust processes using scientific molding across molding types and document via standard sheets.
  • Lead validation by writing/ executing IQ/OQ/PQ protocols and using DOE to set process windows.
  • Analyze viscosity, cure, cavity balance and process window studies; use SPC and Cp/Cpk to reduce scrap and cycle time.
  • Troubleshoot root causes of flash, non‑fill, voids; support MRB and CAPA.
  • Standardize processes across presses and MRPC locations; support process transfers.
  • Lead SMED, Kaizen and Six Sigma projects to improve scrap, yield and OEE.
  • Collaborate with Automation and Tooling on part removal, vision inspection, process monitoring and new equipment.

Skills

Molding process engineering
Rubber/elastomer molding
Thermoplastic injection molding
DOE & SPC analysis
IQ/OQ/PQ protocols
Minitab
Mentoring/leadership

Education

B.S. in Plastics/Polymer, Mechanical, Chemical or Manufacturing Engineering

Tools

IQ/OQ/PQ documentation tools

Job description

Process Engineer: Medical Device Molding

Reports to: Process Engineering Manager | Full-Time | Milwaukee, WI

Master the process. Grow your expertise. Shape the future of healthcare.

Join MRPC: Build What's Next in Medical Technology

For more than 100 years, MRPC has been solving tough manufacturing challenges. Today, we make precision rubber and plastic components for the world's leading medical device companies, parts that end up in devices that help save and improve lives. As we grow across multiple sites, we're looking for a hands‑on processing expert who wants their work to matter.

The Role: Own the Process from First Shot to Full Production

As our Process Engineer, you'll be the go‑to expert on how our molds run. You'll take new jobs from first trial to a validated, production‑ready process. You'll make existing processes faster, leaner and more capable. And you'll build the processing skills of the techs and engineers around you. If you love the science behind a good part and the satisfaction of a process that just runs, this role is for you.

What You’ll Do

  • Launch new jobs right the first time: partner with Project Engineering, Tooling and Quality so every new mold and job is ready for production before release.
  • Build robust processes: apply scientific/decoupled molding to compression, transfer, LSR and thermoplastic injection molding, and document them in standardized process sheets.
  • Lead validation: write and run IQ/OQ/PQ protocols, using DOE to set process windows that hold up.
  • Dig into the data: run viscosity, cure, cavity‑balance and process‑window studies, and use SPC and Cp/Cpk to cut scrap, cycle time and variation.
  • Solve problems at the root: troubleshoot flash, non‑fill, voids and dimensional issues with 5 Whys, fishbone and 8D, and support MRB and CAPA.
  • Standardize across sites: align processes across presses and MRPC locations, and support process transfers between plants.
  • Drive improvement: lead SMED, Kaizen and Six Sigma projects that measurably move scrap, yield and OEE.
  • Shape the future floor: work with Automation and Tooling on part removal, vision inspection, process monitoring and new equipment, including LSR systems.
  • Grow the team: mentor process techs, engineers and operators, and build training that raises processing skills on every shift.

What You Bring

  • A B.S. in Plastics/Polymer, Mechanical, Chemical or Manufacturing Engineering (or equivalent experience), plus 5+ years of hands‑on process engineering in molding.
  • Hands‑on experience with rubber/elastomer molding (compression, transfer or LSR) and/or thermoplastic injection molding.
  • Scientific molding knowledge you've put to work on the production floor.
  • Experience with IQ/OQ/PQ, DOE, PFMEA, Control Plans and change control.
  • Strong statistical skills (SPC, capability, MSA) with Minitab or similar software.
  • A solid understanding of how polymers and elastomers behave, and of mold design basics (gating, venting, runners).
  • A mentor's mindset, plus clear communication and an ownership attitude.
  • Bonus: RJG Master Molder certification, medical device or cleanroom experience (ISO 13485 / FDA), cavity pressure monitoring (eDART), or a Six Sigma Green Belt.

Milwaukee pairs big‑city energy with Midwestern warmth and affordability. As the center of southeastern Wisconsin’s economy, the region is home to a strong manufacturing base and a growing business community, and it is drawing national attention as a place where professionals can build careers and advance quickly.

Life here centers on the water. Lake Michigan defines the skyline, and Lakeshore State Park, Wisconsin’s only urban state park, offers lakefront trails, fishing, and skyline views right downtown. The 108‑mile Oak Leaf Trail loops through Milwaukee County’s parks and nature preserves, and the wider state has more than 15,000 lakes and 800 miles of Great Lakes shoreline for paddling, hiking, and year‑round recreation. Every summer, the lakefront hosts Summerfest, "The World's Largest Music Festival." Since 1968 it has filled the shoreline with hundreds of acts, local food, and fireworks. Add the city’s breweries, beer gardens, dining, arts, and professional sports, and Milwaukee is more than a place to work. It’s a place to live, grow, and belong.

Milwaukee is also one of the country’s leading centers for medical technology. GE HealthCare has deep roots here and designs and builds MRI, CT, and molecular imaging systems at its Waukesha and West Milwaukee campuses. The region is part of the federally designated Wisconsin Biohealth Tech Hub, and the Medical College of Wisconsin anchors a major regional medical center in nearby Wauwatosa. For anyone who wants their work to improve patients’ lives, Milwaukee is a place where you can grow a career alongside the companies shaping the future of healthcare.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Manufacturing Engineer
Manufacturing Engineer

MRPC • Town of Butler (WI)

On-site
USD 90,000 - 120,000
New Product Development Applications Engineer: Medical Device Molding MRPC Headquarters
New Product Development Applications Engineer: Medical Device Molding MRPC Headquarters

Mrpcorp • Milwaukee (WI)

On-site
USD 90,000 - 130,000
Senior Process Engineer, Medical Device Molding
Senior Process Engineer, Medical Device Molding

MRPC • Milwaukee (WI)

On-site
USD 85,000 - 110,000
Senior Process Engineering Manager MedTech Manufacturing
Senior Process Engineering Manager MedTech Manufacturing

Mrpcorp • Wisconsin

Hybrid
USD 110,000 - 140,000
401(k)
401(k) matching
Dental insurance
+8
Process Engineering Manager MRPC Headquarters
Process Engineering Manager MRPC Headquarters

Mrpcorp • Wisconsin

Hybrid
USD 110,000 - 140,000
401(k)
401(k) matching
Dental insurance
+8
Process Engineer - Medical Device Molding & Impact
Process Engineer - Medical Device Molding & Impact

Mrpcorp • Wisconsin

Hybrid
USD 75,000 - 105,000
401(k)
401(k) matching
Dental insurance
+9
Process Engineer MRPC Headquarters
Process Engineer MRPC Headquarters

Mrpcorp • Wisconsin

Hybrid
USD 75,000 - 105,000
401(k)
401(k) matching
Dental insurance
+9
Manufacturing Engineer, Medical Devices — Molding & Process
Manufacturing Engineer, Medical Devices — Molding & Process

MRPC • Town of Butler (WI)

On-site
USD 90,000 - 120,000
Molding Process Engineer
Molding Process Engineer

Stevanato Group • Fishers (IN)

On-site
USD 75,000 - 110,000
Meal stipend
Dental & Vision paid by employer
PTO 5 weeks
New Product Development Applications Engineer: Medical Device Molding
New Product Development Applications Engineer: Medical Device Molding

MRPC • Town of Butler (WI)

On-site
USD 90,000 - 130,000