Primer Coordinator 4:15am-3:00pm

Remington Arms

Lonoke (AR)

On-site

USD 42,000 - 47,000

Full time

14 days+

Get more replies from employers

Send a job-specific resume in minutes.

Benefits offered by this job

Medical and dental
Vision
Disability and life insurance
401K
PTO
Tuition reimbursement
Gear discounts

Job summary

Remington Arms in Lonoke, AR seeks a dedicated general labor associate to tend machines, load materials, and monitor process quality. You will follow written and verbal instructions, wear protective equipment, and contribute to safe, efficient production.

The role requires a High School diploma or GED and ability to communicate in English. Training on hazardous waste handling is provided as needed, with opportunities for overtime and career growth within a manufacturing environment.

Qualifications

  • High School diploma or GED (recognized equivalent).
  • Ability to read, write and communicate in English to perform tasks and interact with supervision.
  • Read and comprehend process instructions and record pertinent information.
  • Basic computer skills to navigate menus and print documents.

Responsibilities

  • Tend one or more machines or processes as directed by area supervisor.
  • Load raw materials into machines and move materials as needed.
  • Perform quality assurance checks as directed.
  • Maintain a clean and safe work area and follow all safety rules.
  • Possess proper PPE and follow hazardous waste handling guidelines where applicable.
  • Attend shift and department meetings as directed by supervisor.

Skills

English literacy
Basic computer skills
Read and interpret instructions

Education

High School diploma

Job description

General Summary

Tends one or more machines or processes as directed by area supervisor. Assures machines are operating properly and calls for technician or supervisor if required. Performs quality assurance checks as directed. Transports raw material, semi-finished goods and finished goods as required to insure efficient process flow. Follows oral and written instructions, wears protective equipment where and when directed and obeys all plant and safety rules and regulations. Supports the facility's mission, safety and ISO goals and directives and is an active participant of the Remington Team.

Principal Duties and Accountabilities (Essential Functions)
  • Works in a safe and orderly manner at all times.
  • Obeys plant, department and area rules and regulations and proactively encourages other team members to do so.
  • Obtains, maintains and wears or uses all necessary safety equipment as directed by work instructions or area supervisor.
  • Attends shift, department and plant meetings in a timely manner as directed by supervisor.
  • Tends one or more machines or processes in work area(s) as directed by area supervisor, including but not limited to: Conveying raw and semi-finished materials to and from machine(s) or work area(s).
  • Loading raw materials into machine(s) or work surfaces.
  • Processing raw materials into semi-finished or finished material(s).
  • Maintains process integrity with proper documentation and observance of process records.
  • Maintains a clean and orderly work area at all times.
  • May handle hazardous waste, including labeling, inspecting, storing and transferring.
  • Hazardous Waste Management training must be completed within six months of entering the job and annually each year thereafter.
  • All employees handling hazardous waste must work under direct supervision of a supervisor or other employee trained in hazardous waste management until the employee has received Hazardous Waste Management training.
  • Good Attendance is required.
  • Overtime, including working extended shift hours and/or during scheduled days off, may be required.

*NOTE: This list presents only the principal duties of the position and is not intended to be comprehensive. Other duties and responsibilities may be assigned as dictated by the business needs and conditions.

Educational Skills and Experience
  • High School diploma, G.E.D. certificate or recognized equivalent.
  • Ability to speak, read and write in the English language sufficient enough to perform the following: Communicate effectively with other team members and supervision.
  • Read and comprehend process instructions.
  • Record pertinent process information as required.
  • Must possess basic personal computer skills sufficient enough to navigate menus and select, open and print documents.
Work Environment

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable challenged individuals to perform the essential functions provided this accommodation does not adversely affect other employees. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts; extreme heat; explosives and vibration. Eye protection in the form of approved safety glasses with side shields or approved safety goggles is required. Approved steel-toe safety shoes are required. The employee is occasionally exposed to wet and/or humid conditions; toxic or caustic chemicals and extreme cold. The noise level in the work environment is usually loud and requires hearing protection to be worn in the work area.

Physical Demands
  • Vision correctable to 20/20 with normal depth perception and peripheral vision.
  • Ability to repeatedly lift and move up to 25 lbs. unaided.
  • Ability to push a loaded production buggy weighing as much as 1,500 lbs.
  • Ability to stand or sit for up to 3 hours at a time.
  • Ability to occasionally kneel, crouch, bend or extend reach as required to perform tasks.
  • Ability to ascend and descend stairs.
  • Ability to grasp and feel small parts.

Note: One or more of the Physical Demands may be waived to enable challenged individuals the opportunity of employment provided this accommodation does not adversely affect other employees.

Pay Range

Starting Hourly Rate: $21.26

The actual annual salary offered to a candidate will be based on variables including experience, geographic location, education, and skills/achievements, and will be mutually agreed upon at the time of offer.

Benefits
  • Medical and dental.
  • Vision.
  • Disability and life insurance.
  • 401K.
  • PTO.
  • Tuition reimbursement.
  • Gear discounts.
  • The ability to add value to an exciting mission!
Equal Opportunity Employer

Minorities/Females/Protected Veteran/Disabled

International Traffic in Arms Regulation (ITAR) and Export Administration Regulation (EAR) Requirements: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national; (ii) U.S. lawful, permanent resident (a/k/a green card holder); (iii) Refugee under 8 U.S.C. Section 1157; or (iv) Asylee under 8 U.S.C. Section 1158 or be eligible to obtain the required authorizations from the U.S. Department of State.

Gun Control Act Requirements: It is unlawful for these categories of persons to possess (for business or personal reasons) firearms or ammunition: (i) convicted of a crime punishable by imprisonment for a term exceeding one year; (ii) fugitive from justice; (iii) unlawful user of or addicted to any controlled substance (as defined in section 102 of the Controlled Substance Act 21 U.S.C. 802); (iv) who has been adjudicated as a mental defective or has been committed to any mental institution; (v) illegal alien; (vi) discharged from the Armed Forces under dishonorable conditions; (vii) who has renounced his or her United States Citizenship; (viii) who is subject to a court order restraining the person from harassing, stalking, or threatening an intimate partner or child of the intimate partner; or (ix) who has been convicted of a misdemeanor crime of domestic violence.

Remington is an equal opportunity employer. All applicants are considered for employment without regard race, color, religion, sexual orientation, gender identity, national origin, disability, veteran status, and any other characteristics protected by law.

The EEO Law poster is available here: http://www.dol.gov/ofccp/regs/compliance/posters/pdf/eeopost.pdf.

Culture

"Working Together to Make it Better" is the phrase we use to highlight the importance of a team environment. We value and entrust every one of our members to help influence the business in the right direction. Every employee should be trained how to successfully do their jobs, encouraged to reach their desired level of growth within the company, and coached to be responsible for results and continued improvement. A team built with members passionate about embracing change and trying to constantly get better will ensure we will be around for another 200 years.

If you need a reasonable accommodation because of a disability for any part of the employment process, please send an e-mail to careers@tkghunt.com. Please note that this email address is for accommodation purposes only. Remington and its affiliates will not respond to inquiries for other purposes.

Get your free, confidential resume review.
or drag and drop your file here.
Similar jobs

Similar jobs worth comparing

Draw Line Tech LN10, Lvl 3A
Draw Line Tech LN10, Lvl 3A

Remington Arms • Lonoke (AR)

On-site
USD 34,000 - 39,000
Medical and dental
Vision
Disability and life insurance
+4
Cup & Anvil Technician - Primer - Shift 10HR Dayshift 4:30am-3:00pm Mon-Thurs
Cup & Anvil Technician - Primer - Shift 10HR Dayshift 4:30am-3:00pm Mon-Thurs

Remington Arms • Lonoke (AR)

On-site
USD 52,000 - 60,000
Medical and dental
Vision
Disability and life insurance
+4
Remington Manfacturing Line Lead 4- Shotshell-10hr dayshift
Remington Manfacturing Line Lead 4- Shotshell-10hr dayshift

Remington Arms • Lonoke (AR)

On-site
USD 77,146,000 - 79,901,000
Medical, dental, vision, disability &
Packing Technician LN10EV 3:15p-1:45a
Packing Technician LN10EV 3:15p-1:45a

Remington Arms • Lonoke (AR)

On-site
USD 2,893,000 - 3,857,000
Medical and dental
Vision
401K
+3
Cup/Shell Technician (Rimfire - Remington)
Cup/Shell Technician (Rimfire - Remington)

Remington Arms • Lonoke (AR)

On-site
Medical and dental
Vision insurance
Disability insurance
+5
Maintenance Mechanic -LN10 M-Th 4:45a-3p
Maintenance Mechanic -LN10 M-Th 4:45a-3p

Remington Arms • Lonoke (AR)

On-site
Medical Insurance
Dental Insurance
Vision Insurance
+6
ARC Plant Technician Operator- 12hr Night shift, Level 4
ARC Plant Technician Operator- 12hr Night shift, Level 4

Remington Arms • Lonoke (AR)

On-site
Medical and dental
Vision
401(k)
+2
Primer- Primer Trucker/ Clean Up Explosive Coordinator-Level2-Weekend Days 6:00am-6:00pm
Primer- Primer Trucker/ Clean Up Explosive Coordinator-Level2-Weekend Days 6:00am-6:00pm

Remington Arms • Lonoke (AR)

On-site
USD 40,000 - 45,000
Medical and dental insurance
401K
PTO
+1
CF Technician - Remington - Shift 10 HR Dayshift - Level 3A
CF Technician - Remington - Shift 10 HR Dayshift - Level 3A

Remington Arms • Lonoke (AR)

On-site
USD <55,000
Medical, dental, and vision insurance
401(k)
PTO
+2
Process Engineer
Process Engineer

Remington Arms • Lonoke (AR)

On-site
USD 70,000 - 97,000
Medical insurance
Dental insurance
Vision insurance
+6