Press Operator Trainee (86278)

The Gill Corporation; El Monte (CA); On-site; USD 33,062 - 38,572; Full time

Job summary

The Gill Corporation seeks a Press Operator Trainee in El Monte, CA to support the production of aircraft panels and liners. You will troubleshoot, replace defective components, monitor press systems, read guides, determine product suitability, and inspect irregularities to ensure smooth operation.

You will work under the Production Supervisor and assist in achieving deadlines while following safety guidelines.

Qualifications

• High school diploma or GED required; related training helpful.
• One or two years of related experience is a plus but not required.
• Must be able to obtain and maintain respirator use certification (Spirometry test acceptable).
• Must be available to work any shift, overtime and weekends.
• Must be able to work in a team environment and follow instructions.
• Must be able to bend, twist and stand for 8–10 hours in extreme heat or cold.
• Ability to read a measuring tape and understand basic measurements.
• Must be able to lift, push and pull a minimum of 50 lbs.

Responsibilities

• Check Process Specifications against work orders.
• Assist with loading and unloading presses.
• Understand basic press function and operations.
• Assist in breaking loads after pressing.
• Inspect panels for correctness and report nonconformities.
• Record material usages and pressing conditions.
• Identify panels with serial numbers and document traceability.
• Set up pressing conditions per GPS instructions.
• Learn operating presses to manufacture quality panels and liners.
• Maintain a clean and safe work area; use hand and power tools as needed.

Skills

Basic Math Skills

Teamwork

Reading Measuring Tape

Lift 50 lbs

Safety Awareness

Education

High School Diploma / GED

Job description

Job Details

Job Location: 0T534 CA - El Monte, CA 91731

Position Type: Full Time

Salary Range: $23.97 - $28.88 Hourly

Job Shift: 2nd Shift

Who we are

The Gill Corporation is one of the world's largest manufacturers of honeycomb, high performance floor panels, cargo compartment liners and original equipment for passenger and freighter aircraft. The company also excels in many other types of reinforced plastics including interior sandwich panels for creating structures such as aircraft galleys and bulkheads, honeycomb core and related products.

The Gill Corporation is looking for a Press Operator Trainee who will perform troubleshooting, replace defective machine components, monitor the systems for efficiency, read instructional guides, determine product suitability, and inspect irregularities before and after the use of press machines to ensure smooth operations. Press Operators Trainee work with Press Operators to finish their projects by their respective deadlines and must follow safety guidelines.

Reporting to the Production Supervisor, they will perform but not be limited to the following responsibilities.

Responsibilities

• Check Gill Process Specifications against work order instructions
• Assist Loads and unloads press.
• Understand the basic function of the press (What the press does and how the press works)
• Assists in breaking loads apart after pressing.
• Assists in inspecting panels for correctness, and informs Operator or supervisor of any noncompliance prior to proceeding with balance of the job.
• Assists in recording material usages and pressing conditions.
• Assists Operator in identifying each panel with serial number and documents all traceability information on the shop planner.
• Assist in checking material tags for proper materials.
• Assist and learn to set up pressing conditions per GPS instructions.
• Assist the operator while learning to operate press 2, 6, 11, 15, 30 and 31 to manufacture quality panels and liners.
• Learn to check panel/liner thickness using a micrometer to ensure its within the tolerance.
• Maintain the work area and equipment in a clean and orderly condition.
• Utilize hand and power tools as needed to perform the duties
• Reports any defective materials or questionable conditions to the Operator, Lead or Supervisor
• Know and follow the PPE safety policies and procedures.
• Maintain a safe work environment
• Other essential duties may be assigned.

Qualifications

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Required Qualifications

• Must have a high school diploma, GED or equivalence
• One or two years of related experience and/or training a plus but not required
• Acceptable Spirometry Test results (full/ half respirator use).
• Must be available to work any shift, over-time and weekends.
• Must be able to work in a team environment, ie follow instructions
• Bend, Twist, and Stand for 8-10 hours a day in extreme heat or cold
• Use hands for simple and power grasping as well as push/pull and fine manipulation
• Be willing to work in a manufacturing environment
• Basic Math Skills: Addition, Subtraction, Multiplication and Division
• Accurately uses and understands how to read a measuring tape
• Effectively communicate information and respond to questions from various levels of the organization
• Must be able to lift, push and pull a minimum of 50 lbs.

PLEASE NOTE

Certain positions may require the ability to obtain and maintain a DOD Secret Clearance.

ITAR Requirement

This position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants will be asked to provide specific documentation to verify U.S. person status under the ITAR and the EAR. A “U.S. person” according to their definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee, or asylee.

Equal Opportunity Employer

The Gill Corporation is an Equal Opportunity Employer. Applicants for all job openings are welcome and will be considered without regard to race, religious creed, color, age, sex, gender identity, gender expression, genetic information, sexual orientation, national origin, religion, marital status, medical condition, physical or mental disability, military service, veteran status, pregnancy, childbirth and related medical conditions, or any other classification protected by federal, state, and local laws and ordinances.

Accommodations

The Gill Corporation provides reasonable accommodations to qualified individuals with disabilities in accordance with the Americans with Disability Act and applicable state and local law. If you require an accommodation in the application process, please notify the Human Resources Department