Plumber

Brookhaven Science Associates, LLC; Upton (NY); On-site; USD 53,000 - 75,000; Full time

Job summary

Brookhaven National Laboratory in Upton, NY seeks a Plumber A to perform maintenance, installation, and repair of piping, plumbing, and tubing systems within the Production Division’s Plumbing Shop. Under minimal supervision, reads drawings and maintains water and gas distribution systems, including fire protection components.

Responsibilities include brazing/soldering, installing, troubleshooting, and performing preventive maintenance while complying with safety, PPE, and DOE/IBEW requirements.

Qualifications

• High School Diploma or GED is required.
• Backflow Tester Certification within 6 months of hire.
• Knowledge of commercial/industrial plumbing systems and safety practices.

Responsibilities

• Maintain, install, and repair piping, plumbing, and tubing systems.
• Read drawings and sketches; braze, solder, cement, and thread piping.
• Inspect and service fire protection and hazardous material systems.
• Perform preventive maintenance and coordinate with project managers.
• Ensure safety, proper PPE use, and compliance with lab rules.

Skills

Plumbing systems knowledge

Troubleshooting

Hand and power tools

Safety compliance

Driver's license

Education

High School Diploma or GED

Backflow Tester Certification

Job description

Organization Overview

The Production Division is a department within the Facilities and Operations Directorate that provides mechanical, architectural, and civil services to build, support and maintain the Lab's infrastructure. Facilitate shipping, receiving, inventory control, and small equipment/office moves. Within the Production Division we have the Plumbing Shop that’s responsible for the Facilities and Operation owned building systems and support such as, Preventive & Corrective Maintenance - Building Domestic Water / Compressed Air / Fire Suppression Systems / Backflow Preventers / Emergency Eyewash & Safety Showers / Deionized & Distilled Water Systems / Plumbing Fixtures / Propane / Process Drains / Vacuum Systems / Program Equipment.

Position Description

The Production Division is seeking a Plumber A to perform maintenance/installation of piping, plumbing, and tubing systems, and components. Under minimum supervision lays out, constructs or installs, repairs, and maintains water and gas distribution systems, related facilities and auxiliary equipment and equipment utilizing water, gas and heat distribution services. The hours of operation/shift for this position are Mon-Friday 8am to 4:30pm. This position reports to the Multi Trade Supervisor.

Essential Duties and Responsibilities:

• Perform maintenance, installation, and repair of piping, plumbing, and tubing systems and components, potentially in a nuclear facility Inspect, troubleshoot, repair, install, and maintain mechanical/piping and tubing systems and their components
• Use appropriate tools and techniques to braze, solder, cement, thread, roll-groove, and press pipe and tubing
• Operate shop equipment, test jigs, and use piping/tubing installation/repair/maintenance tools, as well as basic hand and power tools
• Inspect, troubleshoot, repair, install, and maintain hazardous material and waste systems
• Inspect, troubleshoot, repair, install, and maintain fire systems, fire protection wet and dry systems
• Couple and align mechanical/piping, tubing systems, and components
• Perform preventive and predictive maintenance on piping and tubing systems and components
• Read and interpret drawings and sketches proficiently
• Review scope with customers to define job requirements, offer recommendations for improving product outcomes, and provide status updates on jobs in progress to project managers and management.
• Resolve problems and ensure customer satisfaction
• Participate in work planning walk-downs, material identification/ recommendation, man-hour estimating, and material procurement as required
• Maintain good housekeeping practices by keeping work areas clean and organized
• Maintain compliance with all Lab required training and safety programs
• Work on drawings, schematics, and work specifications to produce successful outcomes using modern techniques and tools of the trade.
• Follow safety and PPE requirements when working in Labs and Radiological work area
• Use computers and associated software to prepare logs and reports, send and receive emails, complete computer-based training and enter time

Required Knowledge, Skills, and Abilities:

• High School Diploma or GED.
• 6-yrs total experience composed of 4-yrs apprenticeship plus 2-yrs experience, or 6-8 yrs. total experience composed of formal trade school plus minimum 2-yrs experience, or 8-yrs experience (no formal training).
• Obtain Backflow Tester Certification with the first 6 months of employment.
• Demonstrate commitment to working safely, acting ethically, and taking personal accountability for operational excellence.
• Knowledge of commercial and industrial plumbing systems, including piping, valves, fittings, fixtures, and associated components.
• Knowledge of plumbing installation, maintenance, and repair practices, including proper methods, materials, tools, and equipment.
• Knowledge of fire sprinkler and fire protection systems, including wet and dry piping systems.
• Knowledge of troubleshooting techniques used to identify and correct plumbing, piping, and mechanical system deficiencies.
• Knowledge of plumbing and piping safety practices, including proper isolation, lockout/tagout, PPE, and safe work procedures.
• Knowledge of proper testing and inspection methods used to verify the integrity and safe operation of plumbing and piping systems.
• Must have a valid NYS Driver's license

Environmental, Health, and Safety Requirements:

• Ability to do heavy lifting > 30 lbs.
• Ability to work in confined spaces.
• Ability to climb fixed and portable ladders.
• Able to work outdoors/cold and warm environments.
• Able to work around moving machinery.
• Able to use of power and air operate hand-tools.
• Have physical coordination dexterity and balance.
• Ability to wear proper PPE such as safety glasses, safety shoes, and hearing protection.
• Able to use a respirator and other related safety equipment.

Other Information

The successful applicant will be required to join IBEW Local 2230 and maintain membership within 30 days of their start date.

The Lab’s placement policy is to select the best qualified candidate for an available position.

The Lab’s placement policy is to select the best qualified candidate for an available position.

With respect to Bargaining Unit positions, candidates are considered in the following order: (1) present benefits-eligible employees within the department/division and/or appropriate bargaining unit, with preference for those within the immediate work group; (2) present benefits-eligible employees within the Laboratory; and (3) outside applicants.

The salary per hour for this position is $46.48.

Brookhaven National Laboratory is committed to employee success and we believe that a comprehensive employee benefits program is an important and meaningful part of the compensation employees receive. Review more information at BNL | Benefits Program

Brookhaven National Laboratory requires all non-badged personnel including visitors to produce a REAL-ID or REAL-ID compliant documentation to access Brookhaven National Laboratory – view more information at www.bnl.gov/real-id. This is due to nationwide identification requirements for federal site access as required by the federal REAL ID Act. Those not in possession of a REAL ID-compliant document will not be permitted to access the site which includes access to the Laboratory for interviews.

As a U.S. Department of Energy laboratory, Brookhaven National Laboratory requires employees to obtain and maintain a DOE Uncleared Personal Identity Verification (UPIV) credential in accordance with Homeland Security Presidential Directive 12 (HSPD-12) requirements. The credentialing process is completed as part of onboarding and enables access to DOE facilities and information systems.

As a condition of employment, the selected candidate must be able to obtain and maintain a UPIV credential. These requirements are established under DOE Order 206.2 Chg. 2, Identity, Credential, and Access Management (ICAM- Identity, Credential, and Access Management (ICAM)), and DOE Order 473.1A- Physical Protection Program- Physical Protection Program.

About Us

Brookhaven National Laboratory (www.bnl.gov) delivers discovery science and transformative technology to power and secure the nation’s future. Brookhaven Lab is a multidisciplinary laboratory with seven Nobel Prize-winning discoveries, 37 R&D 100 Awards, and more than 70 years of pioneering research. The Lab is primarily supported by the U.S. Department of Energy’s (DOE) Office of Science. Brookhaven Science Associates (BSA) operates and manages the Laboratory for DOE. BSA is a partnership between Battelle and The Research Foundation for the State University of New York on behalf of Stony Brook University. BSA salutes our veterans and active military members with careers that leverage the skills and unique experience they gained while serving our country, learn more at BNL | Opportunities for Veterans at Brookhaven National Laboratory. Our track record includes seven Nobel Prize-winning discoveries, 37 R&D 100 Awards (the "Oscars of Innovation"), and countless other advances.

Equal Opportunity/Affirmative Action Employer

Brookhaven Science Associates is an Equal Employment Opportunity Employer-Vets/Disabled.

We are committed to fostering a respectful and collaborative environment that fuels scientific discovery. We consider all qualified applicants without regard to any characteristic protected by law. All qualified individuals are encouraged to apply. We ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation.

*VEVRAA Federal Contractor BSA employees are subject to restrictions related to participation in Foreign Government Talent Recruitment Programs, as defined and detailed in United States Department of Energy Order 486.1A. You will be asked to disclose any such participation at the time of hire for review by Brookhaven. The full text of the Order may be found at: https://www.directives.doe.gov/directives-documents/400-series/0486.1-BOrder-a/@@images/file