Pipefitter Helper

Matrix Service Company; North Carolina; On-site; USD 30,000 - 47,000; Full time

Job summary

Matrix Service, Inc. in North Carolina seeks a Pipefitter Helper to support fitters and welders with layouts, installations, maintenance and repairs of piping systems for maintenance, tank and new construction projects.

The role requires basic hand-tool knowledge and the ability to read drawings, with certification options including the Pipefitter Helper Skills Test or NCCER. Safety training and drug testing are mandatory for the role.

Qualifications

• Ability to read prints and drawings and plan procedures.
• Minimum four years in refinery maintenance/turnaround/construction.
• Must pass safety, drug testing and background checks.

Responsibilities

• Assist fitters/welders with layouts, installations and repairs of piping systems.
• Interpret drawings, plan procedures, and select materials per standards.
• Set up and operate bending, threading and cutting tools for pipe fabrication.
• Test and inspect piping, assemble components and install joints.
• Maintain safety, report work performed, and support field or shop tasks.

Skills

Hand tools knowledge

Pipefitter Helper Skills Test

NCCER certification

Safety training

Job description

Matrix Service, Inc.
Rougemont, NC 27572, USA

Description

PRIMARY FUNCTION:

Assist Fitters/Welder with Lay outs, installations, maintains, and repairs all types of piping systems for maintenance, tank and new construction.

TYPICAL DUTIES:

• Actively supports the Company’s commitment to safety and its Core Values
• Always represents the Company with high moral standards while adhering to the Company’s "Code of Business Conduct and Ethics"
• Receives and understands instructions and prints regarding work assignment
• Interprets drawings and sketches. Plans detail of working procedure and selects materials in accordance with engineering standards
• Lays out work; calculates dimensions; makes sketches of piping systems when needed
• Sets up and operates bending, threading and cutoff equipment and uses hand tools or torch to shape, prepare and fabricate pipe for work to be done
• Tests, inspects, dismantles, repairs, replaces or installs any type of high- or low-pressure piping, tubing, fittings, fixtures and parts for the installation, maintenance and repair of pipelines for air, water, steam, oils, gases, acid, caustics, etc.
• Assembles and tests a variety of piping components
• Sets up for pipe for welded or special type joints
• Assist with fastens hangers and supports
• Handles or makes provision for the handling of materials, equipment and tools to and from job site in shop or field in connection with work
• Makes report of work performed
• Identifies safety hazards you or other employees may be subject to and take all necessary corrective action to eliminate or minimize hazards
• Performs all other job-related duties as requested by supervision

SKILLS, KNOWLEDGE, QUALIFICATIONS & EXPERIENCE:

• Minimum of four (4) years or more in refinery maintenance/turnaround/or construction experience
• A general knowledge of basic hand tools
• Must be able to pass the Pipefitter Helper Skills Test at or above 70% or complete the NCCER certification for your craft
• Complete Matrix Service Safety training, Process Safety Management training and Client / Site specific training
• Must be able to obtain and maintain an active status within the approved drug testing program
• Must be able to pass a Background check

Physical Requirements

• Employee will be required to adhere to large amounts of standing, walking, bending, squatting and lifting
• Will talk and hear to communicate
• Must have good dexterity with hands and fingers to perform the precision adjustments of machinery parts and controls
• Will use arms and hands to signal, grab, hold, turn, push, pull objects, materials, controls and tools
• May be required to lift, carry and move up to 50 lbs.
• Will occasionally work at heights, climb ladders and stairways and work off of platforms. Will work at heights up to 300' utilizing proper fall protection
• Will use vision abilities to focus, see short and long distances, colors, depth perception and peripheral vision
• Must be capable of working outside in the elements including but not limited to the heat, cold, rain, snow and wind; and must be able to work for long period of times up to 12 hours a day
• Will be required to wear personal protective equipment (PPE) including but not limited to hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots

We are an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, age, genetic information, marital status, disability, veteran status, or other legally protected characteristic or category.

Applicants must be currently authorized to work in the United States on a full-time basis.

Qualifications

Licenses & Certifications

Preferred

Equal Opportunity Employer
This employer is required to notify all applicants of their rights pursuant to federal employment laws.For further information, please review the Know Your Rights notice from the Department of Labor.