Pipefitter

Matrix Service Company; Clarksville (AR); On-site; USD 70,000 - 90,000; Full time

Job summary

Matrix Service Company in Clarksville, AR is seeking a qualified pipefitter to lay out, install, maintain and repair all types of piping systems for maintenance, tank, and new construction. This role requires interpreting drawings, planning procedures, and using bending and threading equipment.

You will inspect high/low-pressure piping and ensure safety compliance on site. Qualified candidates have 4+ years in refinery maintenance or construction, NCCER certification or pipefitter test

Qualifications

• Minimum of four (4) years or more in refinery maintenance/turnaround/or construction experience.
• A general knowledge of basic hand tools.
• Must pass the Pipefitter Skills Test at or above 70% or complete the NCCER certification for your craft.
• Experience with piping systems for air, water, steam, oils, gases, acids, caustics, etc.
• Experience interpreting engineering drawings & P&IDs.
• Complete Matrix Safety training, Process Safety Management training and client/site training.
• Must obtain and maintain an active status in the approved drug testing program.
• Must pass a pre-employment background check.
• TWIC card will be required.

Responsibilities

• Lays out, installs, maintains, and repairs piping systems for maintenance, tank and new construction.
• Actively supports safety and Core Values of the company.
• Interprets drawings and prints work assignments and plans procedures.
• Sets up and uses bending, threading, and cutoff equipment and hand tools to shape pipe.
• Tests and inspects high- and low-pressure piping and components for installation and repair.
• Assemblies and tests piping components and prepares joints for welding or special joints.
• Identifies safety hazards and takes corrective action to minimize risks.
• Performs other job-related duties as requested by supervision.

Skills

Safety awareness

Read drawings

P&ID interpretation

Team collaboration

Manual dexterity

Attention to detail

Ability to pass tests

Education

NCCER certification

Tools

Basic hand tools

Pipefitters test prep

Job description

Clarksville, Arkansas
Clarksville, AR 72830, USA

Description

PRIMARY FUNCTION:

Lays out, installs, maintains, and repairs all types of piping systems for maintenance, tank and new construction.

TYPICAL DUTIES:

• Actively supports the Company’s commitment to safety and its Core Values
• Represent the Company at all times with high moral standards while adhering to the Company’s Code of Business Conduct and Ethics
• Receives and understands instructions and prints regarding work assignment
• Interprets drawings and sketches. Plans detail of working procedure and selects materials in accordance with engineering standards
• Lays out work; calculates dimensions; makes sketches of piping systems when needed
• Sets up and operates bending, threading and cutoff equipment and uses hand tools or torch to shape, prepare and fabricate pipe for work to be done
• Tests, inspects, dismantles, repairs, replaces or installs any type of high- or low-pressure piping, tubing, fittings, fixtures and parts for the installation, maintenance and repair of pipelines for air, water, steam, oils, gases, acid, caustics, etc.
• Assembles and tests a variety of piping components
• Sets up for pipe for welded or special type joints
• Fastens hangers and supports.
• Handles or makes provision for the handling of materials, equipment and tools to and from job site in shop or field in connection with work
• Makes report of work performed
• Identifies safety hazards you or other employees may be subject to and take all necessary corrective action to eliminate or minimize hazards
• Performs all other job-related duties as requested by supervision

SKILLS, KNOWLEDGE, QUALIFICATIONS & EXPERIENCE:

• Minimum of four (4) years or more in refinery maintenance/turnaround/or construction experience
• A general knowledge of basic hand tools
• Must be able to pass the Pipefitter Skills Test at or above 70% or complete the NCCER certification for your craft
• Must have experience with the following tests, inspects, dismantles, repairs, replaces or installs any type of high- or low-pressure piping, tubing, fittings, fixtures and parts for the installation, maintenance and repair of pipelines for air, water, steam, oils, gases, acid, caustics, etc.
• Must have experience interpreting engineering drawings & P&ID's
• Complete Matrix Service Safety training, Process Safety Management training and Client / Site specific training
• Must be able to obtain and maintain an active status within the approved drug testing program
• Must be able to pass a pre-employment background check
• TWIC card will be required

Physical Requirements

• Employee will be required to adhere to large amounts of standing, walking, bending, squatting and lifting
• Will talk and hear to communicate
• Must have good dexterity with hands and fingers to perform the precision adjustments of machinery parts and controls
• Will use arms and hands to signal, grab, hold, turn, push, pull objects, materials, controls and tools
• May be required to lift, carry and move up to 50 lbs
• Will occasionally work at heights, climb ladders and stairways and work off of platforms. Will work at heights up to 300' utilizing proper fall protection
• Will use vision abilities to focus, see short and long distances, colors, depth perception and peripheral vision
• Must be capable of working outside in the elements including but not limited to the heat, cold, rain, snow and wind; and must be able to work for long period of times up to 12 hours a day
• Will be required to wear personal protective equipment (PPE) including but not limited to hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots

At Matrix, we are dedicated to building a culture of engagement, respect, collaboration and teamwork. We encourage all whose experience aligns with the listed qualifications to apply and explore joining our organization.

EEO/M/F/Disability/Vets Employer

We are an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, age, genetic information, marital status, disability, veteran status, or other legally protected characteristic or category.

Applicants must be currently authorized to work in the United States on a full-time basis.

Qualifications

Licenses & Certifications

Required

Equal Opportunity Employer
This employer is required to notify all applicants of their rights pursuant to federal employment laws.For further information, please review the Know Your Rights notice from the Department of Labor.