Pipefitter Abilene

EmergencyMD; Abilene (TX); On-site; USD 52,000 - 75,000; Full time

Job summary

EmergencyMD in Abilene, TX seeks experienced pipefitter to lay out, fabricate, assemble, install and maintain piping systems. Responsibilities include reading isometrics, performing rigging, installing steam traps, and fabricating piping from blueprints and P&ID diagrams.

Candidates must have at least three years of field experience, strong blueprint reading skills, and the ability to work safely in a physically demanding environment.

Qualifications

• Three years minimum field experience in trade.
• Ability to perform material take-offs and pipe rigging.
• Read, write and communicate in English sufficient for job functions.

Responsibilities

• Identify pipe by size, type and wall thickness.
• Install and fabricate piping systems from drawings and isometrics.
• Perform simple rigging operations and install steam traps.
• Prepare material takeoffs for various pipe types.
• Read blueprints to erect piping systems and support structures.
• Fabricate and install pipe hangers, supports, and guides.
• Read and interpret pipe and hanger drawings.

Skills

Safety rules

Identify power tools

Identify hand tools

Oxy-acetylene and argon handling

Housekeeping procedures

Precise measurements

Power tools operation

Identify hardware by size/material

Read isometric drawings

Flange make-up (torque)

Identify pipe fittings

Rigging operations

Basic math

Pipe fitting installation

Cutting and welding gases handling

Blueprint interpretation

Education

Three years field experience

Tools

Pipefitter Blue Book

Torpedo Level

Measuring Tape 25'

Wrenches and pliers set

Screwdrivers

Pipe Wrenches 12-24"

Level and squares

Drag and alignment pins

C-clamps

Safety boots

Job description

Purpose

Lay out, fabricates, assembles, installs, and maintains piping and piping systems and supports, fixtures and equipment for industrial piping systems on basis of knowledge of system operation and study of building plans or working drawings. This includes carbon steel, stainless steel, chrome, and PVC systems as well as directing and training pipefitter helpers to perform the same.

Work Schedule

Varies by location. Must have open availability any time any day of the week. Length of employment is limited to job assignment and/or project duration.

Essential Skills

• Practice safety rules
• Identify power tools
• Identify hand tools
• move, store, and transport oxy−acetylene and argon bottles safely.
• Housekeeping procedures
• Make measurements to the 1/16" using a measuring tape
• Use power tools, drill motors, end and angle grinders, and port−a−bands
• Identify and sort nuts, bolts, and screws by size and material
• Identify threaded pipe fittings
• Basic Blueprint Reading
• Perform flange make−up (torque)
• Identify socket weld fittings
• Perform basic math: add, subtract, multiply, and divide
• Identify all thread rod by size and left or right-hand threads
• Identify PVC pipe and fittings
• Identify Rigging equipment
• Identify pipe fittings by size, type, material, and service type
• Set−Up and operate oxy−acetylene torch for heating and cutting
• Read and interpret isometric drawings
• Cut gaskets with gasket cutter
• Identify and discriminate cutting and welding gases
• Set−up and purge stainless steel pipe
• Install reinforced concrete pipe
• Give crane and heavy equipment hand signals
• Read and interpret hanger and support drawings
• Identify gaskets materials by size, material, type, and ratings
• Perform craft math
• Identify hanger components by type, kind, size, and material composition
• Identify and sort valves by size, type, and materials
• Install cast iron push joint pipe
• Install ductile iron mechanical joint pipe
• Fabricate PVC pipe from isometrics
• Use isometrics to fabricate for socket weld pipe, butt weld pipe, and threaded pipe
• Use threading machine to thread pipe

Job Description

• Identify pipe by size, type, and wall thickness
• Transfer benchmarks and layout elevations
• Perform simple rigging operations
• Install steam traps
• Use power actuated anchor gun/red head
• Install fabricated pipe butt weld, socket weld, and screw pipe from orthographies
• Prepare material & pipe-takeoffs for buttweld, socket weld, & threaded pipe
• Use blueprints to erect and fabricate piping systems (Ortho, ISO, P&ID, GA)
• Fabricate pipe hanger, supports, anchors, and guides
• Install pipe hangers, supports, anchors, and guides
• Read and interpret pipe and hanger drawings
• Fabricate, weld, and fiberglass piping
• Install high pressure and high heat piping systems
• Install and set spring hangers/supports
• Perform advanced craft math
• Work within company policy as outlined in the Samuel EPC Craft Handbook
• Perform other duties as assigned by the foreman/supervisor as needed.

Essential Qualifications

• Three (3) years minimum Field experience in trade
• Ability to perform material take-offs, figure offsets, take-off of fittings, and pipe rigging
• Ability to work with others to achieve job goals
• Read, write and communicate using the English language sufficient to perform job functions
• (other preferences will be given for special language skills where there is a business need)

Physical Requirements

• Stand or walk for long periods of time
• Use arms and hands to reach for, handle or manipulate objects
• Lift and carry materials weighing up to 50 pounds; occasionally lift items weighing more than 50 pounds with assistance
• Climb up and down ladders, scaffolds and other objects
• Stoop, kneel, crouch and crawl
• See well (naturally or with correction)
• Eye−hand coordination
• Good physical fitness
• Good sense of balance
• Work at great heights

Tool Requirements

• Steel toed work boots
• Pipefitter Blue Book
• Torpedo Level
• 25' Steel Measuring Tape
• 12\" Adjustable Wrench
• Leather Gloves
• Flat Screwdrivers
• Phillips Screwdrivers
• Toolbox (with lock)
• At least one set of 2-Hole, flange alignment pins
• 10\" Channel Lock Pliers
• 2@ 4\" C-clamps
• 2@ 8\" C-clamps
• 2@ 11\" Vice-grip locking C-clamps
• #9 Side Cutters
• 4\" Wrap−a−round
• 2@ Ballpeen hammer: 16 oz. and 32 oz.
• 24\" Pipefitter's or Framing Squares
• 24\" Level
• 12\" Tri Square
• Plumb bob
• 3/4\" x 6\" Cold Chisel
• Pipe Wrenches: 12\", 14\", 18\" and 24\"
• Center Punch
• Spud Wrench or Line−up Bar
• Combination Wrenches: 3/4\", 7/8\", 15/16\", 1-1/16\", 1-1/8\", and 1-1/4\"
• Degree Finder
• Protractor
• Line−Up Dogs
• Hickey Bar
• Smart Level
• Raincoat or poncho

Environment

Construction Workers perform physically demanding work including lifting and carrying heavy objects, stooping, kneeling, crouching or crawling in awkward positions. Some work at great heights, or outdoors in all weather conditions. With some projects, work exposure to harmful/hazardous materials, chemicals, fumes, odors, lead‑based paints, asbestos, loud noise, or dangerous machinery may exist. To avoid injury, workers in these jobs wear safety clothing, such as gloves, hardhats, protective chemical suits, and devices to protect their eyes, respiratory system, or hearing. While working in underground and/or confined spaces, Construction Workers must be especially alert to safely follow procedures and must deal with a variety of hazards.