Pipe Fitter / Welder Combo – ASME Code

Stand-By Personnel, Inc.; Collinsville (OK); On-site; USD 36,000 - 44,000; Full time

Benefits offered by this job

Temp-to-hire

Long-term potential

ASME Code welding

MIG & Flux Core welding

Four-day workweek (goal)

Bilingual (English/Spanish)

Job summary

Stand-By Personnel is currently seeking experienced Pipe Fitter/Welder Combos for immediate temp-to-hire openings in the Tulsa area. You will fit and weld pipe per ASME Code, read fabrication drawings, and produce quality work in an industrial environment.

Candidates should have MIG and Flux Core welding experience, perform 6G weld tests, and demonstrate accuracy, safety, and reliability. Bilingual applicants are welcome, with strong blueprint-reading and documentation skills.

Qualifications

• Hands-on pipe fitting and welding experience required.
• Ability to read fabrication drawings and welding specs.
• Experience with MIG and Flux Core welding processes.
• Capable of meeting ASME Code standards.
• Able to work independently with good measurements.

Responsibilities

• Fit, assemble, and weld pipe components per drawings and ASME Code.
• Read blueprints and welding specs to determine layout and requirements.
• Prepare joints, position components, and align for welding.
• Perform MIG root and Flux Core passes as required.
• Inspect welds for defects and ensure consistent quality.
• Maintain clean, safe work areas and follow procedures.
• Assist with fabrication as needed.

Skills

Pipe fitting

Welding

Blueprint reading

Independent worker

Safety conscious

Tools

MIG welding

Flux Core welding

6G welding

Job description

Pipe Fitter / Welder Combo – ASME Code | Multiple Openings Pay:$26.00–$32.00+ per hour (Based on Experience) Location: Tulsa, OK Area Current Schedule: Monday–Friday | 8:00 AM – 5:00 PM Future Schedule Goal: Monday–Thursday | 6:00 AM – 5:30 PM Job Type: Temp-to-Hire Openings: 4–5 Positions Available Start Date: ASAP Job Order #: 154140

Position Overview

Stand-By Personnel is seeking4–5 experienced Pipe Fitter / Welder Combos for immediate temp-to-hire opportunities in the Tulsa area. These positions require candidates who can both fit and weld pipe according toASME Code requirements, read fabrication drawings, and produce quality work in an industrial environment. Candidates must have previous hands‑on experience with pipe fitting and welding. The ideal candidate is capable of preparing, fitting, and assembling pipe components while performing code‑quality welds using MIG and Flux Core processes. A 6G weld test is required, and candidates must demonstrate proper setup, joint preparation, welding technique, and attention to quality. English-speaking, bilingual, and Spanish-speaking candidates are encouraged to apply.

Required Experience & Skills

Previous professional pipe fitting and welding experience required. Candidates must be capable of performing both responsibilities and producing welds that meet applicableASME Code standards. Strong blueprint-reading skills and the ability to interpret fabrication prints, welding specifications, and technical drawings are essential. Candidates should have experience with MIG and Flux Core welding processes, pipe fit-up, joint preparation, and welding in the 6G position. Ability to work independently, maintain accurate measurements, and follow established fabrication requirements is important. Reliable transportation, dependable attendance, and a strong commitment to workplace safety are required.

Essential Duties & Responsibilities

Fit, assemble, and weld pipe components according to fabrication drawings, specifications, and applicable ASME Code requirements.

Read and interpret blueprints, shop drawings, and welding specifications to determine pipe layout, fit-up, and welding requirements.

Measure, position, align, and prepare pipe materials for welding.

Complete applicable joint preparation, equipment setup, and material cleaning before beginning welding operations.

Perform MIG root and starting passes, followed by Flux Core fill and cap passes, according to applicable welding procedures.

Inspect completed work for visible defects, verify proper fit-up, and maintain consistent weld quality throughout production.

Maintain clean and organized work areas, follow established welding and fabrication procedures, and comply with all company safety requirements.

Perform additional pipe fitting, welding, and fabrication responsibilities as assigned.

Pipe Fitting & Fabrication

Candidates must have hands‑on experience fitting and assembling pipe components according to fabrication specifications. Responsibilities include interpreting drawings, measuring materials, preparing joints, positioning components, and maintaining accurate alignment before welding. Strong attention to dimensional accuracy and proper fit‑up is essential.

ASME Code Welding

Candidates must be capable of performing pipe welding according to applicable ASME Code requirements. Responsibilities include following approved welding procedures, preparing weld joints correctly, maintaining consistent welding technique, and producing quality welds. Candidates should understand the importance of proper penetration, weld consistency, and adherence to established fabrication standards.

MIG & Flux Core Welding

This position requires proficiency with MIG and Flux Core welding processes. Candidates should be comfortable performing MIG root and starting passes, followed by Flux Core fill and cap passes, according to the required welding procedure. Strong knowledge of weld preparation, equipment setup, and welding technique is important.

Required 6G Weld Test

6G pipe welding position MIG root / starting pass.

Flux Core fill and cap.

Proper equipment and material setup.

Required weld preparation and cleanup.

Completion of the required weld test form.

Candidates must demonstrate the ability to perform the required welding processes while maintaining applicable quality standards.

Blueprint Reading & Specifications

Candidates must be able to read and interpret pipe fabrication prints, technical drawings, and welding specifications. Responsibilities include identifying dimensions, determining component positioning, following applicable welding requirements, and verifying completed work against fabrication specifications.

Quality & Safety

Maintain consistent workmanship while following applicable ASME Code requirements and company quality standards. Inspect completed fit-up and welds for visible defects, identify fabrication concerns, and communicate issues promptly. Follow all company safety procedures, use required PPE, and maintain safe welding and fabrication practices throughout the workday.

Preferred Qualifications

Previous experience as a Pipe Fitter / Welder Combo, Pipe Welder, Industrial Pipe Fitter, or ASME Code Welder is highly valuable. Experience with 6G pipe welding, MIG root passes, Flux Core fill and cap, industrial pipe fabrication, and code-quality welding is strongly preferred. Candidates who can independently perform both pipe fitting and welding responsibilities are encouraged to apply.

Physical Requirements & Work Environment

Ability to stand and walk for extended periods throughout the shift. Frequent bending, kneeling, reaching, lifting, carrying, positioning, pushing, and pulling may be required. Candidates must be comfortable performing physically demanding pipe fitting and welding work in an industrial fabrication environment. Work involves regular exposure to welding equipment, metal components, grinders, sparks, heat, and fabrication machinery. All required PPE and company safety procedures must be followed.

Schedule Requirements

Current Schedule: Monday–Friday | 8:00 AM – 5:00 PM Future Schedule Goal: Monday–Thursday | 6:00 AM – 5:30 PM The employer is working toward transitioning to a four-day workweek. The future schedule is a goal and is not guaranteed. Candidates must be available for the current schedule and willing to accommodate future scheduling changes.

Why You'll Want This Opportunity

• $26.00–$32.00+ per hour, based on experience
• 4–5 immediate openings
• Temp-to-hire opportunity with long-term potential
• Opportunity to utilize specialized pipe fitting and welding skills
• Work with ASME Code fabrication requirements
• Perform MIG and Flux Core pipe welding
• Potential future four-day workweek
• English-speaking, bilingual, and Spanish‑speaking candidates welcome
• Excellent opportunity for experienced Pipe Fitter / Welder Combos seeking industrial fabrication work in the Tulsa area