Penetration Tester - Hardware (Canada)

Packetlabs; California; Hybride; USD 64 000 - 100 000; Plein temps

Avantages offerts par ce poste

Fully remote within Canada

Flexible work environment

Résumé du poste

Packetlabs is a cybersecurity consulting firm seeking a Penetration Tester - Hardware to lead security assessments of embedded devices, including IoT and board-level designs. The role emphasizes hands‑on testing, hardware‑level exploitation, and delivering actionable remediation for real security gaps.

You will work with clients to understand devices, perform firmware analysis, and contribute to lab tooling and methodology while staying current with hardware attack techniques.

Qualifications

• Bachelor’s or higher in Information Security, Computer Science, or Computer/Electrical Engineering (or equivalent hands‑on experience).
• Strong electronics fundamentals with ability to read schematics/datasheets.
• Hands‑on soldering and basic chip removal on boards.
• Experience accessing debug interfaces (JTAG, SWD, UART) and extracting firmware.
• Experience with firmware extraction and analysis on embedded devices.

Responsabilités

• Lead hardware penetration testing on embedded/IoT devices, defining scope and engagement rules.
• Identify and exploit on‑board debug interfaces to gain code execution or memory access.
• Extract firmware via debug ports and readout interfaces (SPI/I2C/NAND) for vulnerability analysis.
• Interrogate embedded buses (SPI, I2C, UART, CAN, USB) with logic analyzers and decoders.
• Perform side‑channel analysis or fault injection where applicable to bypass protections.
• Reverse engineer firmware/binaries with tools (Ghidra/IDA/Binwalk) to find flaws.
• Write high‑quality reports and present findings to clients, with remediation guidance.
• Develop lab tooling, test rigs, and internal methodology; contribute to research.

Connaissances

Electronics fundamentals

Soldering (SMD)

Debug interfaces (JTAG, SWD, UART)

Firmware analysis

Python scripting/C basics

Bench instruments

Embedded architectures (ARM Cortex-M,M

Clear written/verbal communication

Formation

Information Security / CS / Computer or Electrical Eng degree or equivalent hands‑on

Outils

Ghidra

IDA

Binwalk

KiCad / Altium

Description du poste

Packetlabs is a cybersecurity consulting firm specializing in advanced Penetration Testing. We exist to eliminate the false sense of security that comes from shallow testing and checkbox-driven assessments. Our slogan, \"Ready for more than a VA scan?\", reflects a simple standard: real security work should be rigorous, manual, and built to uncover what automated approaches miss. Our clients span government, technology, law enforcement, retail, healthcare, and financial services, and they rely on us because credibility matters when the stakes are high.

Packetlabs is looking for an Penetration Tester - Hardware to lead security assessments of embedded and IoT devices, the physical products where a vulnerability lives in silicon, firmware, and board layout, rather than in a web request. The Ethical Hacker - Hardware is a specialized technical role focused on assessing embedded systems across all industries, from consumer IoT to industrial and connected devices. This role involves getting hands‑on with a device, opening it up, and proving what an attacker with physical or local access can really do.

This role requires the rare combination of offensive security instinct and genuine hardware fundamentals. You will work directly with clients to understand their devices and deliver findings that improve security posture.

Who we are looking for

• No egos, ever. Egos don't belong at Packetlabs. The more you learn, the less you know. You stay humble, ask questions, and work to help clients improve their security.
• Customer‑first mentality. You are an excellent communicator with clients, project managers, and teammates. You are responsive, reliable, and professional throughout every engagement.
• You deliver work that you take pride in. Your work is an autograph of your excellence. You hold yourself to a high standard, and it shows in what you produce.
• Digs deeper into every finding. You don't stop until impact is proven, while understanding that restraint is the right call in sensitive OT environments where high‑risk activity is not appropriate.
• Comfortable being uncomfortable. You move toward obstacles, not away from them. Consulting is not a typical job and requires adapting to rapidly changing environments.
• Always learning. Cybersecurity changes every day, and you keep up because you want to. You are deeply aware of your skillset and committed to improving it.
• Self‑motivated and dependable. You take ownership of your work and your outcomes without needing to be managed into them.

What you’ll be doing

• Hardware Penetration Testing
• Plan and execute end-to-end hardware penetration tests on embedded and IoT devices, against a defined scope and rules of engagement
• Identify, access, and exploit on-board debug interfaces: JTAG, SWD, UART, and similar, to gain code execution or memory access
• Extract firmware via debug ports, in-circuit flash reads (SPI / I2C / NAND), or chip-off when required, and analyze it for vulnerabilities
• Intercept and analyze data on common embedded buses (SPI, I2C, UART, CAN, USB) using logic analyzers and protocol decoders
• Where in scope, perform side‑channel analysis and fault injection (power analysis, voltage/clock glitching) to bypass secure boot, readout protection, or authentication
• Firmware Analysis & Reverse Engineering
• Reverse engineer firmware and embedded binaries (Ghidra, IDA, Binwalk, etc.) to find logic flaws, hardcoded secrets, and exploitable conditions
• Assess physical attack surface, tamper resistance, and key/secret storage
• Distinguish between theoretical and operationally relevant risk to keep findings actionable
• Client Advisory & Remediation
• Write high-quality technical reports and present findings to client stakeholders, both technical and non‑technical
• Advise on practical, prioritized remediation that clients can act on
• Build client confidence through credibility, clear communication, and proven impact
• Methodology, Research & Continuous Improvement
• Build and maintain lab tooling, test rigs, and internal methodology
• Contribute to research, responsible disclosure, and internal knowledge-sharing
• Stay current on hardware attack techniques, embedded architectures, and defensive controls
• Help raise the standard of hardware security work across the firm

What success looks like

• Clients gain a clear, accurate understanding of their hardware risk, backed by proven, reproducible impact
• Findings are credible, actionable, and land for both technical and leadership audiences
• Engagements are delivered to a consistently high standard with strong client confidence
• Scope and rules of engagement are managed well as engagements evolve, with risk surfaced early and clearly
• Packetlabs' hardware testing methodology and lab capability continue to mature through your contribution
• Clients trust Packetlabs as the partner that can break their hardware before someone else does

Education and Experience

• A graduate of an Information Security, Computer Science, or Computer/Electrical Engineering degree program (or equivalent hands‑on experience)
• Strong electronics fundamentals. Able to read schematics and datasheets and reason about a board from them
• Hands‑on soldering ability, including surface‑mount (SMD) rework and basic chip removal
• Demonstrated experience accessing debug interfaces (JTAG, SWD, UART) and extracting firmware from real devices
• Comfort with core bench instruments: logic analyzer, oscilloscope, and multimeter
• Firmware reverse‑engineering skills and scripting proficiency in Python, plus enough C to read embedded code
• Familiarity with common embedded architectures (ARM/Cortex-M, MIPS, AVR, RISC‑V) and RTOS/bare‑metal concepts
• Clear written and verbal communication.
• Nice to have (one or more would be an asset):
• Side‑channel / fault‑injection experience (e.g., ChipWhisperer)
• RF and wireless work: SDR, BLE, sub‑GHz, Wi‑Fi
• Knowledge of secure boot chains, TEEs, secure elements, and HSMs
• PCB design familiarity (KiCad / Altium) for understanding target boards
• Published CVEs, conference talks, CTF placements, or open‑source tooling
• Relevant certifications (e.g., OSCP for breadth, or hardware‑focused training )

Why us?

• The opportunity to work on high‑stakes hardware engagements where your judgment and bench skills genuinely matter
• Receive immediate and ongoing offensive security training, mentorship, and professional development to advance your technical capabilities
• Play a key role in shaping the growth, direction, and methodology of Packetlabs' expanding hardware practice
• A leadership team that values substance, quality, and disciplined execution
• Collaboration with a highly skilled team of security professionals who are passionate about technical excellence and raising the bar
• Competitive compensation and growth opportunity
• Flexible work environment that empowers employees to do their best work
• Fully remote within Canada

The pay range for this role is:

90,000 - 140,000 CAD per year (Remote (Canada))