Offshore Welder

Acadian Contractors, Inc.; Abbeville (LA); On-site; USD 70,000 - 100,000; Full time

Job summary

Acadian Contractors, Inc. seeks an Offshore Welder to weld piping and structural components on offshore facilities in a challenging marine environment. The role requires adherence to welding procedures, maintaining safety, and delivering quality workmanship daily.

The position demands offshore experience, ability to work at heights, and compliance with project specs and client requirements. Join a team focused on safety, efficiency, and professional conduct aboard offshore platforms.

Qualifications

• Minimum 2 years offshore experience.
• Recent offshore experience within the last 4 years.
• Minimum 2 years experience welding pipe and/or structural on carbon steel.
• Familiarity with emergency response/water survival procedures on offshore facilities.

Responsibilities

• Operate pipe cutting or beveling equipment to prepare pipes.
• Weld, clean, and stencil welds per procedures.
• Coordinate with helper/rigger for materials and equipment.
• Align parts using jacks, wedges, and drift pins.
• Inspect 100% penetration on pipe welds and hydro-welds per drawings.
• Inspect welding equipment at shift start and after use.
• Complete weld passes and maintain accurate inventory of consumables.

Skills

Offshore experience

Pipe welding

Structural welding

Carbon steel welding

Job description

Description

Offshore Welder

Job Details

Job Type

Full-time

Houma, LA

Description

Offshore Welder

Location: Offshore

Employment Type: Full-time

Job Summary

The Offshore Welder position requires the individual to demonstrate the ability to weld on piping and/or structural components as directed and per Acadian (or customer) welding procedure requirements. The role demands efficient, productive work throughout the day, punctual attendance, and professionalism in all working relationships. The Welder is ultimately responsible for the quality and completeness of their workmanship. Acadian Contractors, Inc. maintains a continuing policy of non-discrimination in employment. It is our policy to provide equal opportunity to protected veterans in all phases of the employment process and in compliance with applicable federal, state, and local laws and regulations. This policy of non-discrimination shall include, but not be limited to, the following employment decisions and practices: hiring; promotions; demotions or transfers; layoffs; recalls; terminations; rates of pay or other forms of compensation; selection for training, including apprenticeship; and recruitment or recruitment advertising. All employment decisions are based only on valid job requirements.

Key Responsibilities

• Use pipe cutting machine, or if unavailable, use beveling machine to cut pipe to the required length.
• Upon completion of every weld, clean and apply stencil/stamp (3/8" from every weld). Vessel fabrication/welding requires stenciling every three (3) feet of weld length.
• Communicate with the helper/rigger regarding necessary materials or equipment for each task.
• Align parts using jacks, wedges, drift pins.
• Straighten warped or bent parts using hand torch, straightening and push/pull methods.
• Ensure daily submission of accurate oxygen and acetylene bottle counts to offshore management.
• Ensure all welding activities comply with company policies, class requirements, and regulatory laws.
• Maintain accurate inventory of consumables to facilitate repair work, modifications, and general fabrication.
• Perform welding, flame cutting, and associated tasks as required.
• Assemble and secure pipes, tubes, fittings, and related equipment according to specifications by welding, brazing, and threading joints.
• Ascend/descend stairwells frequently with or without tools and equipment.
• Plan pipe system layout, installation, or repair according to specifications
• Demolish and install handrails and grating on platforms.
• Verify all measurements and check for square and level before welding.
• Hang and swing on vertical ropes to/from platform and boat (potential rough seas/wind).
• Ensure all fabricated items are tagged with the correct job number, customer name, and piece number.
• Complete and inspect all weld passes.
• Ensure 100% penetration on all pipe welds, including hydro-welds; structural welds must follow drawings unless otherwise specified.
• Inspect all equipment (welding machine, leads, flux-core box, grinder, etc.) at the start of every shift.
• Climb and work from heights as required.
• Other duties as assigned by the superintendent.

Qualifications

• Minimum of 2 years offshore experience.
• Recent offshore experience within the last 4 years.
• Minimum of 2 years experience welding pipe and/or structural on carbon steel.
• Familiarity with emergency response/escape and water survival procedures on offshore facilities.

HSE Responsibilities

• Embrace, lead, and demonstrate "Acadian F.I.R.S.T." - Vision & Mission Statement as fundamental core values.
• Demonstrate visible leadership and support proactive safety processes (JSA, Time Out & TEAM BBS Observations) to achieve an incident-free workplace and advance our safety culture.
• Adhere to all Health, Safety & Environmental (HSE) Management System policies, procedures, safe work practices, and client-specific regulatory requirements.
• Make a personal commitment and be accountable for HSE results, driving toward the achievement of defined goals. Clearly communicate these goals through direct reports, while coaching, mentoring, and empowering others to achieve desired outcomes.
• Conduct periodic quality assessments of HSE processes to enhance personal coaching and mentoring effectiveness and demonstrate ownership in the successful implementation of HSE programs.