NC - Small Equipment Operator

A & Associates; United States; On-site; USD 25,000 - 28,000; Full time

Job summary

A & Associates is seeking an Equipment Operator to safely operate forklifts and other material-handling equipment in a busy facility in the United States. The ideal candidate will have forklift experience, be able to read loading sheets, and follow safety policies.

Forklift certification is preferred or required depending on site. OSHA certification is a plus, and prior experience with balers, densifiers, and loaders is highly valued. Join a team committed to safe, efficient material handling.

Qualifications

• Minimum 6 months of relevant work experience operating material-handling or industrial equipment.
• Forklift certification preferred/required.
• OSHA certification is a plus.

Responsibilities

• Operate one or more pieces of equipment, including forklifts, front-end loaders, Bobcats, balers, densifiers, and other material-handling equipment.
• Sort and grade incoming materials according to established specifications.
• Maintain inventory records and document materials as required.
• Inspect material quality and ensure proper labeling and safe handling.

Skills

Safety awareness

Communication

Mathematical calculations

Education

High school diploma or equivalent

Job description

Job description

INTRODUCTION

A & Associates is a reputable staffing agency with a proven track record in screening and recruiting as well as job placement and career development. With more than ten (10) offices throughout the United States, A & Associates is a company that can be trusted to provide a diverse level of services with excellence, diligence and integrity. “Quality In Everything We Do” is far more than our mantra, it is our standard!!

Explore a career with A & Associates, one of the leading providers for temporary, temp-to-hire, permanent placement services and security guard services.

• ay Rate: $18.00 per hour
• Shift: 1st Shift
• Schedule: Approximately 6:00 AM – 4:00 PM
• Schedule Flexibility: Start and end times may vary slightly depending on workload, production needs, and daily operations. Employees should be prepared to work a little earlier or later as needed.

Equipment Operator

Job Summary

We are seeking an experienced Equipment Operator to operate one or more pieces of material-handling equipment, including but not limited to forklifts, front-end loaders, Bobcats, balers, and densifiers. This position is responsible for safely moving, sorting, grading, processing, and preparing paper and other loose materials for handling, shipment, or further processing.

Forklift certification is preferred/required, depending on site requirements. OSHA certification is a plus. Relevant equipment-operating experience is required.

Key Requirements

• Minimum 6 months of relevant experience operating material-handling or industrial equipment.
• Forklift certification preferred/required.
• OSHA certification is a plus.
• Must have hands-on experience operating a forklift, loader, Bobcat, baler, densifier, or similar equipment.
• Ability to work safely in a fast-paced industrial environment.
• Must follow all company safety policies and procedures.
• Must wear required work attire and PPE.

Required Work Attire

• Long-sleeve shirt
• Long pants
• No hanging or loose jewelry
• No hoodies

Essential Duties and Responsibilities

• Operate one or more pieces of equipment, including forklifts, front-end loaders, Bobcats, balers, densifiers, and other material-handling equipment.
• Sort and grade incoming materials according to established specifications.
• Operate the densifier and other processing equipment safely and efficiently.
• Start, monitor, and operate the baler according to established procedures.
• Read and respond promptly to baler monitor functions, machine prompts, and alarms.
• Ensure materials are properly fed onto conveyors and coordinate the flow of materials.
• Monitor and document equipment downtime.
• Inspect material quality before it is baled or shipped.
• Coordinate with the MRF Manager regarding materials that need to be baled, processed, or shipped.
• Record materials received or distributed and properly mark materials with identifying information.
• Maintain accurate inventory records.
• Compile worksheets, tickets, and other documentation based on customer specifications.
• Operate equipment to move materials to designated locations.
• Unload, tag, organize, and stack materials in designated rows.
• Load and unload materials from trailers and railcars.
• Move finished bales and other materials from the baler to designated areas.
• Dump containers, bins, Gaylords of materials.
• Read and follow loading/unloading sheets and bills of lading.
• Complete required load and unload tally sheets.
• Inspect and grade wastepaper and other materials received at the facility.
• Perform daily equipment inspections and routine maintenance, including lubricating, fueling, and cleaning equipment.
• Maintain an adequate supply of baling wire and other necessary operating supplies.
• Complete vehicle condition reports as required by company guidelines.
• Maintain clean and orderly work areas.
• Maintain safe working conditions around equipment and work areas.
• Immediately report unsafe conditions, equipment issues, or operational concerns.
• Comply with all company, OSHA, and site-specific safety policies and procedures.
<
• Perform other duties as assigned by management.

Supervisory Responsibilities

No supervisory responsibilities are required for this position.

Qualifications

Education & Experience

• High school diploma or equivalent is preferred but not required.
• Minimum 6 months of relevant work experience .
• Previous experience operating industrial equipment, forklifts, loaders, balers, Bobcats, or similar machinery is strongly preferred.

Certifications & Licenses

• Forklift certification preferred/required.
• OSHA certification is a plus.
• Additional equipment certifications may be required based on site or company requirements.

Knowledge, Skills & Abilities

The successful candidate should be able to:

• Read and understand safety rules, operating and maintenance instructions, and procedure manuals.
• Complete routine reports, worksheets, tally sheets, and other required documentation.
• Communicate effectively with coworkers, supervisors, customers, and other personnel.
• Perform basic mathematical calculations, including addition, subtraction, multiplication, and division using whole numbers, fractions, and decimals.
• Calculate rates, ratios, and percentages and interpret basic graphs.
• Follow written, verbal, and diagram-based instructions.
• Apply sound judgment and common sense when dealing with operational issues.
• Identify and respond appropriately to equipment alarms, machine prompts, and safety concerns.
• Multitask and prioritize responsibilities in a fast-paced work environment.
• Work independently while also communicating effectively with the MRF Manager and other team members.
• Maintain a strong focus on safety, quality, productivity, and accuracy.

Physical Requirements

While performing the essential functions of this position, the employee may be required to:

• Sit for extended periods while operating equipment.
• Stand and walk as needed.
• Use hands and fingers to operate controls and handle materials.
• Reach with hands and arms.
• Bend, stoop, kneel, crouch, or crawl.
• Talk and hear effectively in a loud industrial environment.
• Frequently lift and/or move materials weighing up to 50 punds .
• Occasionally lift and/or move materials weighing up to50 pounds .

Specific vision requirements may include:

• Close vision
• Distance vision
• Color vision
• Peripheral vision
• Depth perception
• Ability to adjust focus

Physical demands may vary by facility and job site.

Work Environment

This position is performed in an industrial/material-processing environment. Employees may regularly be exposed to:

• Moving mechanical equipment and machinery
• Fumes, dust, and airborne particles
• Outdoor weather conditions
• Vibration
• Loud noise levels

Employees are expected to remain alert and follow all required safety procedures while working around heavy equipment and moving machinery.

Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the position.

Safety Expectations

Safety is a primary responsibility of this position. Employees must:

• Follow all company and OSHA safety requirements.
• Wear required PPE and appropriate work attire at all times.
• Maintain awareness of moving equipment, vehicles, conveyors, and machinery.
• Report unsafe conditions, incidents, injuries, and equipment malfunctions immediately.
• Complete required equipment inspections and safety documentation.
• Operate equipment only when properly trained and authorized.

This position requires demonstrated equipment-operating experience. Forklift certification is preferred/required, and OSHA certification is a plus.

EEO STATEMENT

A & Associates, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.