Metal Stamping Technician

Riverside Mfg LLC; Fort Wayne (IN); On-site; USD 42,000 - 65,000; Full time

Job summary

Riverside Mfg., LLC in Fort Wayne, IN is seeking a Metal Stamping Technician to set up, adjust, and prove stamping presses and dies to meet drawings and work orders. You will own die changes from setup to first-piece approval and coordinate with downstream teams to keep parts flowing on time.

The role requires independent work, 3+ years in stamping, and strong blueprints/GD&T reading skills, with adherence to safety and quality procedures.

Qualifications

• High school diploma or GED.
• Minimum of 3 years of hands-on experience setting dies and setting up stamping presses in a manufacturing environment.
• Ability to read and interpret blueprints, engineering drawings, die prints, and GD&T, with strong shop math skills.
• Clear communication with supervisors, operators, tool & die, engineering, and quality personnel on setups, issues, and handoffs.
• Must be a U.S. person per ITAR regulations for access to export‑controlled data.

Responsibilities

• Read and interpret engineering drawings, blueprints, GD&T callouts, die prints, and work orders to determine press, die, and setup requirements.
• Set and change progressive, compound, line, and single-hit dies in presses, including die alignment and shut height adjustment.
• Set up coil-fed press lines, including uncoilers and servo feeds; set feed length and stock guides.
• Set press stroke, speed, and tonnage limits; configure die protection sensors and lubrication systems.

Skills

Blueprints reading

GD&T interpretation

Die setting

Press setup

Quality inspections

Troubleshooting

Safety compliance

Education

High school diploma or GED

Tools

Calipers & micrometers

Press controls

Overhead cranes

Forklifts

Job description

If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

PRODUCTION Regular Full Time Manual Labor Fort Wayne, IN, US

POSITION SUMMARY

The Metal Stamping Technician sets up, adjusts, and proves out stamping presses, dies, and coil-fed press lines to produce stamped metal components that meet drawing and work order requirements. Working independently with minimal supervision, the technician owns die changes from die setting and feed setup through first-piece approval, troubleshoots die and press issues, and hands off proven jobs for production. As part of Riverside Mfg., LLC’s vertically integrated operation, the role keeps stamped parts flowing accurately and on time to downstream welding, machining, finishing, and assembly.

KEY RESPONSIBILITIES

• Read and interpret engineering drawings, blueprints, GD&T callouts, die prints, and work orders to determine press, die, and setup requirements
• Set and change progressive, compound, line, and single-hit dies in mechanical, hydraulic, and servo stamping presses, including die alignment, clamping, and shut height adjustment
• Set up coil-fed press lines, including uncoilers, straighteners, and servo feeds; set feed length, pilot release, pitch, and stock guides
• Set press stroke, speed, and tonnage limits; configure die protection sensors, tonnage monitors, and die lubrication systems

Process Prove-Out & Troubleshooting

• Run first hits and trial strips, adjusting for material variation, die timing, and feed issues to achieve conforming parts
• Diagnose and correct stamping defects (burrs, splits, wrinkles, slug pulling, misfeeds, dimensional drift) and press or feed equipment issues
• Release proven setups to press operators and support them with adjustments and questions during the run
• Coordinate with Engineering, the Tool & Die room, and Maintenance on new die tryouts, die repairs, sharpening, and process changes

Quality & Documentation

• Perform first-article and in-process inspections using calipers, micrometers, height gauges, pin gauges, and other precision measuring tools
• Identify, tag, and segregate nonconforming parts; escape quality concerns to the Production Supervisor and Quality team
• Create and maintain setup sheets, die records, inspection records, and part traceability in accordance with the company quality management system
• Handle drawings and other controlled technical data in accordance with company export control and information security procedures

Safety, Maintenance & Continuous Improvement

• Follow all safety procedures, including press guarding and light curtains, die safety blocks, lockout/tagout, safe die handling and rigging, and required PPE
• Perform routine preventive maintenance on presses, feed equipment, and dies; report die wear and equipment issues promptly
• Maintain a clean, organized work area and die storage that meets 5S standards
• Recommend improvements to dies, setups, and stamping processes to reduce changeover time, scrap, and downtime; train and mentor press operators on setup and safe operation

QUALIFICATIONS

Required

• High school diploma or GED
• Minimum of 3 years of hands-on experience setting dies and setting up stamping presses in a manufacturing environment
• Demonstrated ability to work independently with minimal supervision, including completing die changes, first-piece approvals, and troubleshooting die and press problems without assistance
• Ability to read and interpret blueprints, engineering drawings, die prints, and GD&T, with strong shop math skills (fractions, decimals, basic trigonometry)
• Clear communication with supervisors, operators, tool & die, engineering, and quality personnel on setups, issues, and handoffs
• Proficiency with stamping press controls, coil feed equipment, die protection systems, hand and power tools, overhead cranes and forklifts for die handling, and precision measuring instruments
• Must be a U.S. person as defined by the International Traffic in Arms Regulations (ITAR), 22 CFR 120.62 (U.S. citizen, lawful permanent resident, or protected individual under 8 U.S.C. 1324b(a)(3)), as this position requires access to export-controlled technical data

Preferred

• Experience in defense, aerospace, or another regulated manufacturing environment
• NIMS metalforming credential (e.g., Stamping Press or Die Setting), forklift/crane certification, or vocational certificate in tool and die
• Working knowledge of die construction and basic die repair, plus quick die change (SMED), lean manufacturing, and 5S practices

POSITION SUMMARY

The Metal Stamping Technician sets up, adjusts, and proves out stamping presses, dies, and coil-fed press lines to produce stamped metal components that meet drawing and work order requirements. Working independently with minimal supervision, the technician owns die changes from die setting and feed setup through first-piece approval, troubleshoots die and press issues, and hands off proven jobs for production. As part of Riverside Mfg., LLC’s vertically integrated operation, the role keeps stamped parts flowing accurately and on time to downstream welding, machining, finishing, and assembly.

KEY RESPONSIBILITIES

Die Setting & Press Setup

• Read and interpret engineering drawings, blueprints, GD&T callouts, die prints, and work orders to determine press, die, and setup requirements
• Set and change progressive, compound, line, and single-hit dies in mechanical, hydraulic, and servo stamping presses, including die alignment, clamping, and shut height adjustment
• Set up coil‑fed press lines, including uncoilers, straighteners, and servo feeds; set feed length, pilot release, pitch, and stock guides
• Set press stroke, speed, and tonnage limits; configure die protection sensors, tonnage monitors, and die lubrication systems

Process Prove-Out & Troubleshooting

• Run first hits and trial strips, adjusting for material variation, die timing, and feed issues to achieve conforming parts
• Diagnose and correct stamping defects (burrs, splits, wrinkles, slug pulling, misfeeds, dimensional drift) and press or feed equipment issues
• Release proven setups to press operators and support them with adjustments and questions during the run
• Coordinate with Engineering, the Tool & Die room, and Maintenance on new die tryouts, die repairs, sharpening, and process changes

Quality & Documentation

• Perform first-article and in-process inspections using calipers, micrometers, height gauges, pin gauges, and other precision measuring tools
• Identify, tag, and segregate nonconforming parts; escape quality concerns to the Production Supervisor and Quality team
• Create and maintain setup sheets, die records, inspection records, and part traceability in accordance with the company quality management system
• Handle drawings and other controlled technical data in accordance with company export control and information security procedures

Safety, Maintenance & Continuous Improvement

• Follow all safety procedures, including press guarding and light curtains, die safety blocks, lockout/tagout, safe die handling and rigging, and required PPE
• Perform routine preventive maintenance on presses, feed equipment, and dies; report die wear and equipment issues promptly
• Maintain a clean, organized work area and die storage that meets 5S standards
• Recommend improvements to dies, setups, and stamping processes to reduce changeover time, scrap, and downtime; train and mentor press operators on setup and safe operation

QUALIFICATIONS

Required

• High school diploma or GED
• Minimum of 3 years of hands‑on experience setting dies and setting up stamping presses in a manufacturing environment
• Demonstrated ability to work independently with minimal supervision, including completing die changes, first‑piece approvals, and troubleshooting die and press problems without assistance
• Ability to read and interpret blueprints, engineering drawings, die prints, and GD&T, with strong shop math skills (fractions, decimals, basic trigonometry)
• Clear communication with supervisors, operators, tool & die, engineering, and quality personnel on setups, issues, and handoffs
• Proficiency with stamping press controls, coil feed equipment, die protection systems, hand and power tools, overhead cranes and forklifts for die handling, and precision measuring instruments
• Must be a U.S. person as defined by the International Traffic in Arms Regulations (ITAR), 22 CFR 120.62 (U.S. citizen, lawful permanent resident, or protected individual under 8 U.S.C. 1324b(a)(3)), as this position requires access to export‑controlled technical data

Preferred

• Experience in defense, aerospace, or another regulated manufacturing environment
• NIMS metalforming credential (e.g., Stamping Press or Die Setting), forklift/crane certification, or vocational certificate in tool and die
• Working knowledge of die construction and basic die repair, plus quick die change (SMED), lean manufacturing, and 5S practices

M-TH 6:30a-5p

Overtime as needed on Fridays