Sheet Metal Press Brake Set-Up Operator

Riverside Mfg LLC; Fort Wayne (IN); On-site; USD 45,000 - 65,000; Full time

Job summary

Riverside Mfg., LLC in Fort Wayne, IN is seeking a Sheet Metal Press Brake Set Up Operator to set up, program, and operate CNC press brakes to form precision sheet metal parts per drawings and orders. You will manage tooling, bend sequencing, first-piece approval, and integration with downstream operations.

The role requires 3+ years of hands-on setup/operation experience, the ability to work with minimal supervision, and strong reading of blueprints and GD&T.

Qualifications

• High school diploma or GED.
• Minimum of 3 years of hands-on experience setting up and operating CNC press brakes in a sheet metal fabrication environment.
• Demonstrated ability to work independently with minimal supervision, including completing setups, first-piece approvals, and troubleshooting forming problems without assistance.
• Ability to read and interpret blueprints, engineering drawings, and GD&T, with strong shop math skills (fractions, decimals, basic trigonometry for bend calculations).
• Clear communication with supervisors, quality personnel, and team members on part status, issues, and handoffs.
• Proficiency with CNC press brake controls and precision measuring instruments.
• Must be a U.S. person as defined by ITAR, as this position requires access to export-controlled technical data.

Responsibilities

• Read and interpret engineering drawings, blueprints, GD&T callouts, and work orders to determine bend sequence, tooling, and setup requirements.
• Select, install, and align punches, dies, and backgauge settings; complete tooling changeovers safely and efficiently.
• Program, edit, and prove out CNC press brake programs at the control; calculate bend allowances, bend deductions, and flat-pattern dimensions as needed.
• Make first-piece setups and adjust for springback, material thickness variation, and grain direction.
• Operate CNC press brakes to form parts in a range of materials and gauges; meet daily production schedules and cycle-time targets.
• Coordinate material flow with upstream cutting operations and downstream welding and assembly; record production quantities, scrap, and labor time.
• Perform first-article and in-process inspections using calipers, micrometers, protractors, radius gauges, and other tools; maintain records.

Job description

If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Sheet Metal Press Brake Set-Up Operator

PRODUCTION Regular Full Time Fort Wayne, IN, US

2 days ago Requisition ID: 1098

POSITION SUMMARY

The Sheet Metal Press Brake Set Up Operator sets up, programs, and operates press brakes to form precision sheet metal components to drawing and work order requirements. Working independently with minimal supervision, this experienced operator owns the full setup process, from tooling selection and bend sequencing through first-piece approval and production. As part of Riverside Mfg., LLC’s vertically integrated operation, the role supplies accurate, on-time formed parts to downstream welding, finishing, and assembly operations.

KEY RESPONSIBILITIES

Machine Setup & Programming

• Read and interpret engineering drawings, blueprints, GD&T callouts, and work orders to determine bend sequence, tooling, and setup requirements
• Select, install, and align punches, dies, and backgauge settings; complete tooling changeovers safely and efficiently
• Program, edit, and prove out CNC press brake programs at the control; calculate bend allowances, bend deductions, and flat-pattern dimensions as needed
• Make first-piece setups and adjust for springback, material thickness variation, and grain direction

Production Operations

• Operate CNC press brakes to form parts in a range of materials (carbon steel, stainless steel, aluminum) and gauges
• Meet daily production schedules and cycle-time targets while maintaining quality standards
• Coordinate material flow with upstream cutting operations and downstream welding and assembly
• Accurately record production quantities, scrap, and labor time in the company’s production tracking system

Quality & Inspection

• Perform first-article and in-process inspections using calipers, micrometers, protractors, radius gauges, and other precision measuring tools
• Identify, tag, and segregate nonconforming parts; elevate quality concerns to the Production Supervisor and Quality team
• Maintain inspection records and part traceability in accordance with the company quality management system
• Handle drawings and other controlled technical data in accordance with company export control and information security procedures

Safety, Maintenance & Continuous Improvement

• Follow all safety procedures, including machine guarding and light curtains, lockout/tagout, and required PPE
• Perform routine preventive maintenance, tooling care, and inspections; report equipment issues promptly
• Maintain a clean, organized work area that meets 5S standards
• Recommend improvements to setups, tooling, and bend sequences to reduce setup time and scrap; help train less experienced operators

QUALIFICATIONS

Required

• High school diploma or GED
• Minimum of 3 years of hands-on experience setting up and operating CNC press brakes in a sheet metal fabrication environment
• Demonstrated ability to work independently with minimal supervision, including completing setups, first-piece approvals, and troubleshooting forming problems without assistance
• Ability to read and interpret blueprints, engineering drawings, and GD&T, with strong shop math skills (fractions, decimals, basic trigonometry for bend calculations)
• Clear communication with supervisors, quality personnel, and team members on part status, issues, and handoffs
• Proficiency with CNC press brake controls and precision measuring instruments
• Must be a U.S. person as defined by the International Traffic in Arms Regulations (ITAR), 22 CFR 120.62 (U.S. citizen, lawful permanent resident, or protected individual under 8 U.S.C. 1324b(a)(3)), as this position requires access to export-controlled technical data

Preferred

• Experience in defense, aerospace, or another regulated manufacturing environment
• NIMS press brake credential or vocational/technical certificate in metal fabrication or machining
• Experience with multiple press brake control platforms, offline bend programming software, and lean manufacturing / 5S practices

POSITION SUMMARY

The Sheet Metal Press Brake Set Up Operator sets up, programs, and operates press brakes to form precision sheet metal components to drawing and work order requirements. Working independently with minimal supervision, this experienced operator owns the full setup process, from tooling selection and bend sequencing through first-piece approval and production. As part of Riverside Mfg., LLC’s vertically integrated operation, the role supplies accurate, on-time formed parts to downstream welding, finishing, and assembly operations.

KEY RESPONSIBILITIES

Machine Setup & Programming

• Read and interpret engineering drawings, blueprints, GD&T callouts, and work orders to determine bend sequence, tooling, and setup requirements
• Select, install, and align punches, dies, and backgauge settings; complete tooling changeovers safely and efficiently
• Program, edit, and prove out CNC press brake programs at the control; calculate bend allowances, bend deductions, and flat-pattern dimensions as needed
• Make first-piece setups and adjust for springback, material thickness variation, and grain direction

Production Operations

• Operate CNC press brakes to form parts in a range of materials (carbon steel, stainless steel, aluminum) and gauges
• Meet daily production schedules and cycle-time targets while maintaining quality standards
• Coordinate material flow with upstream cutting operations and downstream welding and assembly
• Accurately record production quantities, scrap, and labor time in the company’s production tracking system

Quality & Inspection

• Perform first-article and in-process inspections using calipers, micrometers, protractors, radius gauges, and other precision measuring tools
• Identify, tag, and segregate nonconforming parts; elevate quality concerns to the Production Supervisor and Quality team
• Maintain inspection records and part traceability in accordance with the company quality management system
• Handle drawings and other controlled technical data in accordance with company export control and information security procedures

Safety, Maintenance & Continuous Improvement

• Follow all safety procedures, including machine guarding and light curtains, lockout/tagout, and required PPE
• Perform routine preventive maintenance, tooling care, and inspections; report equipment issues promptly
• Maintain a clean, organized work area that meets 5S standards
• Recommend improvements to setups, tooling, and bend sequences to reduce setup time and scrap; help train less experienced operators

QUALIFICATIONS

Required

• High school diploma or GED
• Minimum of 3 years of hands-on experience setting up and operating CNC press brakes in a sheet metal fabrication environment
• Demonstrated ability to work independently with minimal supervision, including completing setups, first-piece approvals, and troubleshooting forming problems without assistance
• Ability to read and interpret blueprints, engineering drawings, and GD&T, with strong shop math skills (fractions, decimals, basic trigonometry for bend calculations)
• Clear communication with supervisors, quality personnel, and team members on part status, issues, and handoffs
• Proficiency with CNC press brake controls and precision measuring instruments
• Must be a U.S. person as defined by the International Traffic in Arms Regulations (ITAR), 22 CFR 120.62 (U.S. citizen, lawful permanent resident, or protected individual under 8 U.S.C. 1324b(a)(3)), as this position requires access to export-controlled technical data

Preferred

• Experience in defense, aerospace, or another regulated manufacturing environment
• NIMS press brake credential or vocational/technical certificate in metal fabrication or machining
• Experience with multiple press brake control platforms, offline bend programming software, and lean manufacturing / 5S practices

M-TH 6:30a - 5p. Overtime as needed on Fridays