Mechanical Technician

NGC Transmission Equipment (America), Inc.

Fort Worth (TX)

On-site

USD 36,000 - 51,000

Full time

14 days+

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

NGC Transmission Equipment (America), Inc. in Fort Worth, TX is seeking a Shop Technician to support repair, rebuild, inspection, and assembly of gear drives, main shafts, and related rotating equipment.

You will work in a heavy industrial shop, read internal drawings and BOMs, use hand and measurement tools, and follow safety, quality, ISO, and EHS procedures. Must have a mechanical background, positive attitude, good communication, HS diploma, and be willing to operate forklifts/cranes or be

Qualifications

  • Mechanical background is required. Gearing related experience is a plus.
  • Positive attitude and good communication skills.
  • Basic knowledge and experience using common hand tools and measurement tools.
  • Ability to safely operate forklifts and cranes or willingness and ability to be trained and certified.

Responsibilities

  • Operate forklifts and cranes safely in a busy repair shop.
  • Disassemble, clean, and inspect gear drives per Repair Procedure Document Guidelines.
  • Assemble and inspect gear drives per Repair Procedure Document Guidelines.
  • Disassemble, clean, and inspect main shafts per Main Shaft Repair Procedure Document Guidelines.
  • Assembly and inspection of main shafts per Main Shaft Repair Procedure Document Guidelines.
  • Read tolerances and interpret internal drawings and BOMs.
  • Support safety, quality, and 5S practices; travel up to 15% annually.

Skills

Mechanical background
Forklift operation
Crane operation
Measurement tools
Reading drawings
Communication

Education

High School Diploma or equivalent experience in wind turbine environment

Job description

Work Location: Fort Worth, TX

Job Type: Full-time

SUMMARY

The Shop Technician is to support gearbox, main shaft, drivetrain, or related rotating equipment repair, rebuild, inspection, and assembly.

RESPONSIBILITIES

Support the Operations Department by performing value added work. Responsibilities include:

  • Reports to the Production supervisor of the organization.
  • Operate forklifts and cranes in a safe and efficient manner.
  • Adherence to safety requirements, such as PPE, chemical safety (MSDS), crane, fork lift, and work station inspections.
  • Adherence to internal systems related to Quality, ISO, and Environmental, Health, and Safety (EHS) to ensure an efficient, competent, and effective operation.
  • Comprehension of Imperial and Metric tolerances.
  • Comprehension of internal drawings, bills of material, and procedural documentation.
  • Disassembly, cleaning, and inspection of gear drives per Repair Procedure Document Guidelines (see FM 10XYZ for specific details).
  • Perform visual inspection:
    • Record abnormal wear;
    • Measure and record respective bores and journals; and
    • Arrange and identify components (gearing) that passed visual inspection to receive further processing such as nondestructive testing and grinding.
  • Recycle unusable items such as bearings, damaged gearing, and auxiliary items.
  • Assembly and inspection of gear drives per Repair Procedure Document Guidelines (see FM 10XYZ for specific details).
  • Disassembly, cleaning, and inspection of main shafts per Main Shaft Repair Procedure Document Guidelines (see FM 10MSZ for specific details).
  • Assembly and inspection of main shafts per Main Shaft Repair Procedure Document Guidelines (see FM 10MSZ for specific details).
  • Adherence to production schedule and completion of tasks in a timely manner.
  • Assisting with timing and continuous improvement exercises.
  • Maintain and clean equipment, tools (shared and individual) and work stations.
  • Adherence to 5S requirements.
  • Attending scheduled meetings such as daily production and weekly safety, when requested.
  • Up to 15% of work time travel may be required annually based on business needs.
QUALIFICATIONS
  • Mechanical background is required. Gearing related experience is a plus.
  • Must have a positive attitude and good communication skills.
  • Basic knowledge and experience using common hand tools and measurement tools.
  • Ability to safely operate forklifts and cranes or willingness and ability to be trained and certified.
EDUCATION
  • High School Diploma, or equivalent experience in wind turbine environment.
WORK CONDITIONS AND PHYSICAL ENVIRONMENT

This position works in a heavy industrial repair shop environment involving large gearbox components, rotating equipment, oils, cleaning chemicals, cranes, forklifts, and industrial tooling. The employee must be able to:

  • Lift and move components weigh up to 75 pounds.
  • Stand, bend, kneel, crouch, climb, and work in physically demanding conditions for extended periods.
  • Work in oily, greasy, noisy, and industrial shop conditions.
  • Safely work around heavy equipment and suspended loads.
  • Use hand tools, power tools, and precision instruments safely and effectively.
  • Read and interpret technical documentation and inspection records.

The above statements describe the general nature and level of work being performed. This job description does not serve as a contract, nor does it limit the employer’s ability to establish or change the content, nature, or essential functions of this job. Employees holding this position will be required to perform any other job-related duties as requested by management. Under the Americans with Disabilities Act (ADA) of 1990, reasonable accommodations will be considered for qualified individuals with a disability. NGC (America) maintains "at-will" employment, where either party is free to terminate the relationship at any time.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Mechanical Engineer
Mechanical Engineer

NGC Transmission Equipment (America), Inc. • Fort Worth (TX)

On-site
USD 70,000 - 95,000
WTG Mechanic/Technician
WTG Mechanic/Technician

Greenenergy Tsg • Palm Springs (CA)

On-site
USD 45,000 - 65,000
General Maintenance Technician
General Maintenance Technician

Targa Resources • Midkiff (TX)

On-site
USD 30,000 - 39,000
Aftermarket Inspection Service Tec: Lufkin
Aftermarket Inspection Service Tec: Lufkin

Sumitomo Group • Lufkin (TX)

On-site
USD 30,000 - 37,000
Life insurance & AD&D (Company Paid)
Short & Long Term Disability Insurance
401K, 401K Match
+2
Equipment Maintenance Technician 1
Equipment Maintenance Technician 1

Reliance, Inc. • Petersburg (VA)

On-site
USD 34,000 - 39,000
Workshop Manager
Workshop Manager

JCT Recruiting • Ponchatoula (LA)

On-site
USD 60,000 - 85,000
Aftermarket Inspection Service Tec: Lufkin
Aftermarket Inspection Service Tec: Lufkin

Sumitomo Drive Technologies USA • Lufkin (TX)

On-site
USD 29,000 - 37,000
Life insurance
Disability insurance
401K with match
+2
Machinist Mechanic
Machinist Mechanic

Nrgenergy • Houston (TX)

On-site
USD 50,000 - 70,000
Machinist Mechanic
Machinist Mechanic

Direct Energy Business • Houston (TX)

On-site
USD 50,000 - 70,000
Traveling Wind Technician: Advanced Gearbox & Blade Repair
Traveling Wind Technician: Advanced Gearbox & Blade Repair

Takkion • Sioux Falls (SD)

Hybrid
USD 45,000 - 75,000