Materials Engineering Mechanical Test Engineer

Hireart

Foster City (CA)

On-site

USD 83,000 - 138,000

Full time

14 days+

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Benefits offered by this job

Pre-tax commuter benefits
Employer health benefits
Flexible Spending Account
Disability and life insurance covered
401k package

Job summary

HireArt is seeking a Materials Engineering Mechanical Test Engineer in Foster City, CA to support materials characterization, failure analysis, and component testing in its Materials & Failure Analysis Lab. You’ll perform hands-on mechanical testing, develop custom test approaches, and generate clear data reports.

The role requires operating Instron UTMs, designing fixtures in CATIA, and executing standardized test methods with rigorous documentation.

Qualifications

  • A bachelor's degree in mechanical engineering, materials engineering, or a related discipline.
  • 3+ years of experience in mechanical testing, laboratory testing, or vehicle development.
  • Hands-on experience operating Instron or equivalent UTM systems.
  • Working knowledge of ASTM and ISO mechanical test standards.
  • Proficiency with CATIA for 3D modeling and mechanical fixture design.
  • Experience developing and setting up custom or non-standard mechanical tests.
  • Experience using optical microscopes and cameras for fracture or component inspection.
  • Strong attention to detail and disciplined laboratory documentation practices.
  • Ability to travel within the Bay Area as needed.

Responsibilities

  • Operate Instron Universal Testing Machines (UTMs) to perform tensile, compression, shear, bend, peel, fatigue, and other mechanical tests.
  • Set up and execute ASTM and ISO test methods while developing custom or non-standard test approaches when established standards are insufficient.
  • Select appropriate load cells, grips, extensometers, and fixturing to ensure accurate, repeatable testing and reliable data.
  • Design custom mechanical test fixtures in CATIA, creating manufacturable designs for in-house or vendor fabrication.
  • Prepare test specimens and articles using basic cutting, polishing, torquing, and fabrication tools.
  • Use optical microscopes and cameras to document fracture surfaces and tested components and correlate observed fracture features with test results.
  • Analyze test data and document test conditions, deviations, observations, findings, and recommendations in clear technical reports.
  • Develop and maintain SOPs and test methods while supporting lab organization, safety, equipment readiness, and cross-functional engineering needs.
  • Travel within the Bay Area for support as needed.

Skills

Hands-on testing
Attention to detail
Lab documentation
Cross-functional work
Adaptability

Education

Bachelor's degree in Mechanical Engineering
Bachelor's degree in Materials Engineering

Tools

Instron Universal Testing Machines
CATIA

Job description

Expected compensation: 79.50 USD Per Hour


HireArt is helping an on-demand, autonomous ride-hailing company find a Materials Engineering Mechanical Test Engineer to support materials characterization, failure analysis, and component-level testing within its Materials & Failure Analysis Lab.


In this role, you’ll perform hands-on mechanical testing and laboratory analysis, executing standardized ASTM and ISO test methods while developing custom approaches for testing needs that fall outside established standards. You’ll work closely with materials, design, manufacturing, and quality engineers to generate accurate, repeatable test data and support technical investigations.


The ideal candidate is a hands-on, detail-oriented test engineer with experience operating Instron or equivalent universal testing machines, designing custom fixtures, and executing standardized mechanical test methods. You bring strong technical judgment and can adapt testing approaches when established methods do not fully address the engineering problem.


As a Materials Engineering Mechanical Test Engineer, You’ll


  • Operate Instron Universal Testing Machines (UTMs) to perform tensile, compression, shear, bend, peel, fatigue, and other mechanical tests.

  • Set up and execute ASTM and ISO test methods while developing custom or non-standard test approaches when established standards are insufficient.

  • Select appropriate load cells, grips, extensometers, and fixturing to ensure accurate, repeatable testing and reliable data.

  • Design custom mechanical test fixtures in CATIA, creating manufacturable designs for in-house or vendor fabrication.

  • Prepare test specimens and articles using basic cutting, polishing, torquing, and fabrication tools.

  • Use optical microscopes and cameras to document fracture surfaces and tested components and correlate observed fracture features with test results.

  • Analyze test data and document test conditions, deviations, observations, findings, and recommendations in clear technical reports.

  • Develop and maintain SOPs and test methods while supporting lab organization, safety, equipment readiness, and cross-functional engineering needs.

  • Travel within the Bay Area for support as needed.


Requirements


  • A bachelor's degree in mechanical engineering, materials engineering, or a related discipline

  • 3+ years of experience in mechanical testing, laboratory testing, or vehicle development

  • Hands-on experience operating Instron or equivalent UTM systems

  • Working knowledge of ASTM and ISO mechanical test standards

  • Proficiency with CATIA for 3D modeling and mechanical fixture design

  • Experience developing and setting up custom or non-standard mechanical tests

  • Experience using optical microscopes and cameras for fracture or component inspection

  • Strong attention to detail and disciplined laboratory documentation practices

  • Ability to adapt quickly in a fast-paced engineering environment

  • Ability to travel within the Bay Area as needed


Bonus Qualifications


  • Experience testing polymers, composites, metals, or adhesive bonds

  • Familiarity with DIC extensometry, strain measurement, or fatigue testing

  • Previous experience in automotive, aerospace, or advanced manufacturing laboratories


Benefits


  • Pre-tax commuter benefits

  • Employer (HireArt) subsidized healthcare benefits (eligibility begins on the first of the month following 60 days of service)

  • Flexible Spending Account for healthcare-related costs

  • HireArt covers all costs for short- and long-term disability and life insurance

  • 401k package


Commitment

This is a full-time, ongoing contract position staffed via HireArt. It will be onsite and available to candidates who are local to the Foster City, CA area.


HireArt values diversity and is an Equal Opportunity Employer. We are interested in every qualified candidate who is eligible to work in the United States. Unfortunately, we are not able to sponsor visas or employ corp-to-corp.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Mechanical Test Engineer
Mechanical Test Engineer

SITE Staffing Inc. • Greendale (WI)

On-site
USD 80,000 - 110,000
Test Technician - Manufacturing Operations
Test Technician - Manufacturing Operations

Hireart • Foster City (CA)

On-site
USD 32,000 - 45,000
Pre-tax commuter benefits
Employer subsidized healthcare
Flexible Spending Account
+2
Hardware Engineer - Test Development
Hardware Engineer - Test Development

Hireart • Foster City (CA)

On-site
USD 90,353 - 128,685
Pre-tax commuter benefits
Employer subsidized healthcare
401k package
Mechanical Engineer - Serviceability (Contract role)
Mechanical Engineer - Serviceability (Contract role)

Hireart • Foster City (CA)

On-site
USD 85,000 - 121,000
Pre-tax commuter benefits
Employer subsidized healthcare
Flexible Spending Account (FSA)
+2
Engineer - Fleet Operations
Engineer - Fleet Operations

Hireart • Foster City (CA)

On-site
USD 85,000 - 120,000
Pre-tax commuter benefits
Healthcare benefits
Flexible Spending Account (FSA)
+2
Senior Mechanical Validation & Test Engineer – Electro-Mechanical Systems
Senior Mechanical Validation & Test Engineer – Electro-Mechanical Systems

First Soft Solutions LLC • Sunnyvale (CA)

On-site
USD 140,000 - 190,000
Mechanical Test Engineer
Mechanical Test Engineer

Experis Technology Group • San Jose (CA)

On-site
USD 78,000 - 106,000
Weekly Pay
Medical Plans
Dental Plan
+8
Mechanical Test Engineer (Consulting) and Laboratory Manager
Mechanical Test Engineer (Consulting) and Laboratory Manager

Veryst Engineering, LLC • Massachusetts

On-site
USD 90,000 - 120,000
Materials Test Operator - Contract
Materials Test Operator - Contract

Commonwealth Fusion Systems LLC • Harvard (MA)

On-site
USD 48,000 - 62,000
Lab Test Technician
Lab Test Technician

Singapore Technologies Engineering Ltd • Baltimore (MD)

On-site
USD 37,000 - 54,000
Medical/Dental/Vision coverage
HSAs/FSAs for health spending
Onsite gym facilities
+4