Manufacturing Engineer

Anduril-1; Fort Collins (CO); In loco; USD 111.000 - 147.000; Tempo pieno

Vantaggi offerti da questo lavoro

Equity grants

Health benefits

Descrizione del lavoro

Anduril Industries is seeking an RF Manufacturing Engineer to bridge radar hardware design and scalable production. You will develop and optimize manufacturing processes for RF assemblies and work with RF engineers, systems teams, and operations to transition prototypes to full production.

You will document processes, troubleshoot complex issues, and drive improvements in yield, cycle time, and cost. This role requires strong collaboration across engineering, quality, supply chain, and

Competenze

• BS in Electrical Engineering, Electronics Engineering or a related field.
• 3+ years in electronics/RF hardware production environment.
• Experience with RF test software (Keysight IO library, BenchVue, NIMAX).
• Experience with SMT, soldering (J-STD-001), and board-level integration.
• Ability to read complex drawings, schematics and RF specs.
• Hands-on troubleshooting with RF hardware and test equipment (network analyzers, oscilloscopes).
• Proven RCCA or root-cause/corrective-action experience.
• Excellent communication; able to work in fast-paced, cross-functional teams.
• Eligible for/able to obtain an active Secret clearance.

Mansioni

• Own development and optimization of manufacturing processes for RF electronics.
• Create and maintain process docs: assembly instructions, routing, inspection plans, tools/fixtures.
• Troubleshoot RF/electronic manufacturing issues and apply RCCA methods.
• Drive process improvements using data, CPK studies, and best practices.
• Support manufacturability feedback to RF/electrical design teams.
• Develop and validate test procedures and fixtures for RF systems.
• Collaborate with design, quality, supply chain, and ops for new products.
• Support customer-facing hardware demos to capture manufacturing needs.
• Travel to test sites or supplier facilities as needed.

Conoscenze

RF engineering

Manufacturing processes

Soldering & SMT

Root Cause Analysis

Data analysis

Cross-functional teamwork

Test equipment proficiency

Formazione

BS in Electrical Engineering or related field

Strumenti

Keysight IO library

BenchVue

NIMAX

SCPI/GPIB

Descrizione del lavoro

Anduril Industries is a defense technology company with a mission to transform U.S. and allied military capabilities with advanced technology. By bringing the expertise, technology, and business model of the 21st century’s most innovative companies to the defense industry, Anduril is changing how military systems are designed, built and sold. Anduril’s family of systems is powered by Lattice OS, an AI-powered operating system that turns thousands of data streams into a realtime, 3D command and control center. As the world enters an era of strategic competition, Anduril is committed to bringing cutting-edge autonomy, AI, computer vision, sensor fusion, and networking technology to the military in months, not years.

ABOUT THE TEAM

The Anduril Battlespace Awareness Radar team develops state-of-the-art radar systems to tackle significant security challenges for America and its allies. The team is seeking an RF Manufacturing Engineer to help bridge the gap between radar hardware design and scalable production. They are responsible for all aspects of radar system development, from ideation through initial production. In this role, you will work closely with interdisciplinary technical teams — including RF engineers, systems engineers, and operations — to develop and optimize manufacturing processes for complex RF and electronic assemblies, ensuring radar systems transition smoothly from prototype to full-rate production.

WHAT YOU'LL DO

• Own the development and optimization of manufacturing processes for RF electronic assemblies, from initial prototyping through transition to full production.
• Develop and maintain manufacturing process documentation including assembly instructions, workflow/routing, inspection plans, and tool and fixture designs for RF hardware and electronic subassemblies.
• Troubleshoot complex electrical and RF manufacturing issues on the production line, applying root cause analysis and corrective action methodologies to permanently resolve problems.
• Drive continuous improvement of manufacturing processes through data analysis, process capability studies, and application of best practices to improve yield, reduce cycle time, and decrease cost.
• Support design-for-manufacturability efforts by providing real-time feedback to RF and electrical design engineers on producibility, component selection, and assembly constraints.
• Develop and validate test procedures and fixtures for electronic products, components, and RF systems to ensure production quality and performance.
• Collaborate cross-functionally with design engineering, quality, supply chain, and operations teams to support new product introductions with accelerated time to market.
• Support critical customer-facing hardware demonstrations and use these interactions to better understand manufacturing requirements and end-user needs.
• Travel to test sites, supplier facilities, or partner locations as needed.

REQUIRED QUALIFICATIONS

• BS in Electrical Engineering, Electronics Engineering, or a related engineering field
• 3+ years of engineering experience in an electronics or RF hardware production environment
• Familiarity with RF Test Software such as Keysight IO library suite (BenchVue), NIMAX or equivalent
• Demonstrated experience with manufacturing processes for electronic assemblies, including SMT, soldering (J-STD-001 or equivalent), and board-level integration
• Ability to interpret complex engineering drawings, schematics and RF-specific specifications
• Hands-on troubleshooting skills with electronic and RF hardware, including the use of test equipment such as network analyzers, signal & spectrum analyzers, and oscilloscopes
• Strong problem-solving skills with experience applying root cause/corrective action (RCCA) or similar structured methodologies
• Excellent communication skills and ability to work effectively in a fast-paced, cross-functional team environment
• Eligible to obtain and maintain an active Secret clearance

PREFERRED QUALIFICATIONS

• Experience with RF design principals and RF-specific manufacturing processes such as waveguide assembly, antenna array fabrication, microwave component integration, or radar T/R module production
• Experience with RF and Antenna testing such as S-parameter characterization and antenna pattern measurement
• Familiarity with manufacturing execution systems (MES), SAP, or similar production management tools
• Experience with ECAD tools (e.g., Altium) for reviewing designs, troubleshooting issues and developing tooling/fixtures
• Experience interfacing with RF test equipment through manufacturer protocols (eg SCPI, GPIB, etc)
• Experience with programming or scripting (e.g., Python, VBA, SQL,) for process automation and data analysis
• Knowledge of EMI/EMC constraints and their impact on manufacturing and assembly processes
• Experience supporting the manufacture of complex electronic systems for defense or aerospace applications
• Experience leading or mentoring junior manufacturing engineers

US Salary Range

$111,000 - $147,000 USD

The salary range for this role is an estimate based on a wide range of compensation factors, inclusive of base salary only. Actual salary offer may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations. Highly competitive equity grants are included in the majority of full time offers; and are considered part of Anduril's total compensation package. Additionally, Anduril offers top-tier benefits for full-time employees, including:

At Anduril, we invest in our people. Our comprehensive, competitive benefits package (available at little to no cost to employees) ensures you’re supported in health, recovery, and whatever comes next. For more information, Explore Our Benefits .

As set forth in Anduril Industries’s Equal Employment Opportunity policy,we do not discriminate on the basis of any protected group status under any applicable law.

Voluntary Self-Identification of Disability

Form CC-305 Page 1 of 1 OMB Control Number 1250-0005 Expires 07/31/2029

Why are you being asked to complete this form?

We are a federal contractor or subcontractor. The law requires us to provide equal employment opportunity to qualified people with disabilities. We have a goal of having at least 7% of our workers as people with disabilities. The law says we must measure our progress towards this goal. To do this, we must ask applicants and employees if they have a disability or have ever had one. People can become disabled, so we need to ask this question at least every five years.

How do you know if you have a disability?

A disability is a condition that substantially limits one or more of your “major life activities.” If you have or have ever had such a condition, you are a person with a disability. Disabilities include, but are not limited to:

• Alcohol or other substance use disorder (not currently using drugs illegally)
• Autoimmune disorder, for example, lupus, fibromyalgia, rheumatoid arthritis, HIV/AIDS
• Blind or low vision
• Cancer (past or present)
• Cardiovascular or heart disease
• Celiac disease
• Cerebral palsy
• Deaf or serious difficulty hearing
• Diabetes
• Disfigurement, for example, disfigurement caused by burns, wounds, accidents, or congenital disorders
• Epilepsy or other seizure disorder
• Gastrointestinal disorders, for example, Crohn's Disease, irritable bowel syndrome
• Intellectual or developmental disability
• Mental health conditions, for example, depression, bipolar disorder, anxiety disorder, schizophrenia, PTSD
• Missing limbs or partially missing limbs
• Mobility impairment, benefiting from the use of a wheelchair, scooter, walker, leg brace(s) and/or other supports
• Nervous system condition, for example, migraine headaches, Parkinson’s disease, multiple sclerosis (MS)
• Neurodivergence, for example, attention-deficit/hyperactivity disorder (ADHD), autism spectrum disorder, dyslexia, dyspraxia, other learning disabilities
• Partial or complete paralysis (any cause)
• Pulmonary or respiratory conditions, for example, tuberculosis, asthma, emphysema
• Short stature (dwarfism)
• Traumatic brain injury

Disability Status Select...

PUBLIC BURDEN STATEMENT: According to the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless such collection displays a valid OMB control number. This survey should take about 5 minutes to complete.