Manufacturing Calibration Technician - 1st Shift

Sig Sauer, Inc.; Exeter (NH); On-site; USD 42,000 - 54,000; Full time

Job summary

SIG SAUER, Inc. in New Hampshire seeks a Gage Calibration Technician I to support calibration of electrical, mechanical, and electronic measuring instruments, learning to operate precision metrology tools, gages, and records management.

You will work with engineers and technicians to ensure accuracy and compliance in a manufacturing environment. Qualifications include a high school diploma or equivalent and basic GD&T knowledge, plus proficiency with calibration software such as Gage Trak and

Qualifications

• High school diploma or equivalent and minimum inspection experience.
• Ability to understand and interpret mechanical drawings, blueprints, and tolerances.
• Basic working knowledge of GD&T.
• Basic understanding of geometric dimensioning and tolerancing.
• Ability to use calibration software such as Gage Trak.
• Must be able to clearly convey ideas and information in English.

Responsibilities

• Set up standard and special purpose laboratory equipment to test, evaluate, and calibrate instruments.
• Disassemble gages and inspect components for defects.
• Measure parts for conformity with specifications.
• Reassemble and calibrate gages and instruments.
• Maintain calibration records and ensure accurate results.
• Assist engineers in formulating test, calibration, repair plans.
• Communicate problems to supervision and help find solutions.
• Participate in 5S workplace activities and sustainment.
• Regular on-site attendance and punctuality is expected.
• Overtime or alternate shifts may be required based on business needs.

Skills

Mechanical drawings interpretation

Blueprints reading

GD&T knowledge

Calibration software (Gage Trak)

English communication

Scheduling and gage file creation

Education

High school diploma or equivalent

Inspection experience (Level 1+)

Tools

Gage Trak

Job description

SIG SAUER, Inc. is a leading provider and manufacturer of firearms, electro-optics, ammunition, airguns, suppressors, remote controlled weapons stations, and training. For over 250 years SIG SAUER, Inc. has evolved, and thrived, by blending American ingenuity, German engineering, and Swiss precision. Today, SIG SAUER is synonymous with industry-leading quality and innovation which has made it the brand of choice amongst the U.S. Military, the global defense community, law enforcement, competitive shooters, hunters, and responsible citizens. Additionally, SIG SAUER is the premier provider of elite firearms instruction and tactical training at the SIG SAUER Academy. Headquartered in Newington, New Hampshire, SIG SAUER has over 3,400 employees across sixteen U.S. locations in three states, and four additional global facilities. SIG SAUER is certified a Great Place to Work. For more information about the company and product line visit: www.sigsauer.com

Position Summary:

The Gage Calibration Technician I is responsible for supporting gage calibration requirements, testing and calibrating electrical, mechanical, electromechanical, and electronic measuring, recording, and indicating instruments and equipment for conformance to established standards. This role is responsible for learning how to effectively use all basic precision measuring hand tools including indicators, micrometers, thread wires, height masters, and comparators in the performance of these duties.

Job Duties and Responsibilities:

• Set up standard and special purpose laboratory equipment to test, evaluate, and calibrate other instruments and test equipment.
• Disassemble gages and instruments and inspect components for defects.
• Measure parts for conformity with specifications.
• Reassemble and calibrate gages and instruments.
• Provide both efficient and accurate performance of routine mechanical gage calibrations including maintenance of calibration records.
• Assist engineers in formulating test, calibration, repair, and evaluation plans and procedures to maintain precision accuracy of measuring, recording, and indicating instruments and equipment.
• Communicate effectively to supervision regarding problems and strive to find solutions.
• Seek and act upon ways to improve daily work processes to enhance productivity.
• Participate in 5S Workplace activities, maintaining the area in good working order through sustainment activities.
• Regular on-site attendance and punctuality is a necessary function of this position.
• May be required to work in other functional areas and/or facilities depending on business needs.
• May be required to work overtime or alternate shifts based on business needs.
• Miscellaneous duties as assigned.

Education/Experience & Skills:

• High school diploma or equivalent and minimum inspection experience should be equivalent to a Mechanical/Dimensional Inspector, Level 1 or greater.
• Ability to understand and interpret mechanical drawings, blueprints, and tolerances.
• Basic working knowledge of GD&T is required.
• Basic understanding of geometric dimensioning and tolerancing.
• Ability to use calibration software such as Gage Trak.
• Must be able to create a schedule, gage files, and populate gage
• Must be able to clearly, concisely, and accurately convey ideas and information to others, in English, both verbally and in written form.

Working Conditions:

• Regularly perform repetitive tasks.
• Work is primarily standing (90 + % of the shift) except for lunch and break periods.
• Shifts are 8 hours, 10 hours, and 12 hours.
• The duties of this job normally require exposure to a typical manufacturing environment. Frequent standing, sitting, stooping/squatting, walking, and stair climbing can be expected along with frequent lifting and/or moving of tooling, parts containers, and materials up to 40 pounds.
• Must be able to reach with hands and arms, bend and kneel frequently at a minimum of 50% of the shift, as well as undergo repetitive wrist, hand, elbow, shoulder, and ankle motions.
• Must demonstrate proficient fine motor skills, ability to grip, reach, pull, turn, and use tools to torque fixtures in various machinery or in the assembly, machining, or testing of parts.
• Specific vision abilities required may include close vision, distance vision, peripheral and depth perception, and the ability to focus on fine print.
• Must wear required Personal Protective Equipment (PPE) where required.
• Must comply with all work exposure EH&S training requirements and adhere to SIG SAUER Inc. security mandates.

Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status or other characteristics protected by law.

Equal Opportunity Employer
This employer is required to notify all applicants of their rights pursuant to federal employment laws.
For further information, please review the Know Your Rights notice from the Department of Labor.

#EntryLevelJobs #NowHiring #HiringNow #CareerStart #EntryLevelRole #JobOpportunity #InspectionJobs #QualityInspection #QualityControl #QAJobs #ManufacturingJobs #NHJobs #NewHampshireJobs #LocalHiring #ManufacturingCareers #ProductionJobs #IndustrialJobs #FactoryJobs #GageCalibration #GaugeCalibration #MetrologyJobs #CalibrationTechnician #CalibrationCareers