Manual Machinist-Auxiliary Equipment-3rd Shift

Anderson International - USA

Stow (OH)

On-site

USD 28,000 - 39,000

Full time

6 days ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Anderson International - USA is seeking a skilled manual machinist for the 3rd shift to support CNC and manual machining departments. You will prepare and finish components using horizontal broach, drill press, saw, slab mill and planer mill, with manual turning/milling as needed.

Responsibilities include studying blueprints, setting up machines, measuring with gauges, and maintaining quality. Strong blueprint reading and 3+ years of experience are required; work hours include potential overtime

Qualifications

  • High school diploma or equivalent.
  • 3+ years of manual machining experience on supporting equipment (broaching, drill press, saws, slab or planer milling).
  • Good blueprint reading and shop math.

Responsibilities

  • Study blueprints, routings and work orders to determine dimensions, tolerances, tooling and sequence of operations.
  • Set up and run horizontal broach for keyways, splines and other internal forms; select broaches and bushings and check results with gauges.
  • Set up and cut ID keyways on planer mill; fabricate keyways to drawing size, depth and position.
  • Set up slab mill to produce keyways to specifications.
  • Drill, ream, countersink and tap using fixtures, vises and clamps; locate holes from layout or drawings.
  • Cut bar, plate and tube stock to length; set blade speed and feed within tolerances.
  • Laying out parts with height gauges, scribes and surface plates when no fixture exists; deburr and break edges.

Skills

Blueprint reading
Calipers
Micrometers
Height gauges
Go/no-go gauges
Manual turning
Manual milling
3+ years manual machining

Education

High school diploma or equivalent

Tools

Broaches and bushings
Fixtures, vises and clamps

Job description

Summary of PositionRuns AIC's supporting manual equipment on 3rd shift - horizontal broach, drill press, saw, slab mill , and planer mill for ID keyways - to prepare and finish components so they keep moving to the next operation. Manual turning and milling are secondary responsibilities as the schedule requires.ScopePrimary responsibility is the auxiliary (supporting) manual equipment that feeds and finishes work for the CNC and manual machining departments: cutting stock to length, broaching, drilling and tapping, slab milling on Machine 137 and cutting ID keyways on the planer mill. Secondary responsibility is manual turning and manual milling when the schedule calls for it. Works without a supervisor on the floor for part of the shift and escalates problems to the 3rd Shift Production Manager.ResponsibilitiesStudy blueprints, routings and work orders to determine dimensions, tolerances, tooling and sequence of operations.Horizontal broach (primary): set up and run broaching for keyways, splines and other internal forms; select broaches and bushings and check results with gauges.Planer mill (primary): set up and cut ID keyways to drawing size, depth and position.Slab mill - (primary): set up and slab mill to produce keyways to intended specificationsDrill press (primary): drill, ream, countersink and tap using fixtures, vises and clamps; locate holes from layout or the drawing.Saw (primary): cut bar, plate and tube stock to length; set blade speed and feed and hold length tolerances.Manual turning and milling (secondary): run manual lathes and Bridgeport-type mills as the schedule requires.Lay out parts with height gauges, scribes and surface plates when no fixture exists; deburr and break edges before parts move on.Check parts with calipers, micrometers, height gauges, keyway, plug gauges and other applicable gauges; record first-piece and in-process checks.Change saw blades and sharpen or replace cutters, broaches and drills; maintain equipment and report machine problems to maintenance.Clock on and off every work order operation accurately; report labor against the correct job.Report any routing, drawing or work instruction problem through the Process Issue Report the same shift.Communicate job status, problems and handoffs to the 1st shift at shift change.Keep the work area clean and organized report safety issues / concerns to managementPreferred Education/Experience/SkillsHigh school diploma or equivalent.3+ years of manual machining experience on supporting equipment - broaching, drill press, saws, slab or planer milling.Manual lathe and manual mill experience a plus (secondary duties).Good blueprint reading (keyways, hole patterns, slots, tolerances) and shop math.Able to use calipers, micrometers, height gauges, indicators and go/no-go gauges.Ability to work 3rd shift on a consistent schedule; overtime as workload requires.Good attendance and safety record; follows AIC safety rules and PPE requirements.Motivated, accountable self-starter who can work with limited supervision on an off shift.Basic computer skills for clocking work orders (Sage 500 today, Epicor Kinetic in 2027).Personnel SupervisedDirect:NoneIndirect:NonePhysical RequirementsStand and walk for most of the shift; reach, bend, stoop, kneel and climb as needed.Lift and carry up to 50 lbs; heavier loads with a hoist, crane or forklift.Close vision, distance vision, depth perception and the ability to adjust focus.Work around operating machinery, coolant, noise and metal chips; safety glasses, safety shoes and hearing protection required.| | | |
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Manual Machinist-Auxiliary Equipment-3rd Shift
Manual Machinist-Auxiliary Equipment-3rd Shift

Anderson International Corp • Stow (OH)

On-site
USD 30,000 - 41,000
Manual Machinist-Auxiliary Equipment-3rd Shift
Manual Machinist-Auxiliary Equipment-3rd Shift

Anderson International Corp • Metz (OH)

On-site
USD 42,000 - 66,000
Manual Machinist-Auxiliary Equipment-3rd Shift
Manual Machinist-Auxiliary Equipment-3rd Shift

Anderson International • Stow (OH)

On-site
USD 25,000 - 39,000
Manual Machinist-Off Shift
Manual Machinist-Off Shift

Anderson International Corp • Stow (OH)

On-site
USD 42,000 - 64,000
Grinding Technician-3rd Shift
Grinding Technician-3rd Shift

Anderson International Corp • Stow (OH)

On-site
USD 42,000 - 54,000
Grinding Technician-3rd Shift
Grinding Technician-3rd Shift

Anderson International Corp • Metz (OH)

On-site
USD 42,000 - 63,000
Grinding Technician-3rd Shift
Grinding Technician-3rd Shift

Anderson International • Stow (OH)

On-site
USD 25,000 - 39,000
Machinist I - 3rd Shift
Machinist I - 3rd Shift

Standex • New Berlin (WI)

On-site
USD 28,000 - 39,000
CNC Milling Operator III
CNC Milling Operator III

Lourdes Design and Manufacturing • Hauppauge (NY)

On-site
USD 75,000 - 110,000
Health insurance
Dental insurance
Vision insurance
Machinist III
Machinist III

Hydro Dyne Engineering • Clearwater (FL)

On-site
USD 42,000 - 66,000