Maintenance Technician - 2nd Shift - Santa Ana, CA

VetJobs

Santa Ana (CA)

On-site

USD 37,000 - 52,000

Full time

31 hours ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Eaton’s DCPD division in Santa Ana is seeking a Maintenance Technician on 2nd shift. The role focuses on mechanical and electrical maintenance of facilities, machines, and equipment within a manufacturing environment.

The position offers a 40-hour work week with potential overtime. The candidate will support engineers, coordinate with building contractors, troubleshoot systems, read layouts and drawings, and implement Lean improvements to optimize production and safety.

Qualifications

  • Minimum 2 years industrial/facilities maintenance experience.
  • Legal authorization to work in the United States without sponsorship.
  • No relocation benefit; within 50-mile radius of Santa Ana.
  • High school diploma or GED from an accredited institution.
  • Ability to troubleshoot electrical, hydraulic, and pneumatic systems.
  • Ability to read facility layouts and construction drawings.

Responsibilities

  • Assist Engineers, Project Managers, and other functions on future plant or department layout proposals/ Kaizens.
  • Coordinate with Santa Ana’s building and grounds contractors as needed.
  • Assist Manufacturing Engineers in the development of prototype equipment, manufacturing process, structural maintenance and equipment relocation/installation through LEAN concepts.
  • Assist manufacturing operators, supervisors in troubleshooting manufacturing problems.
  • Assist other personnel with troubleshooting functions to determine most efficient method for repair of production lines and equipment.
  • Develop and implement improvements to manufacturing or front-end procedures and processes through improved layout, material handling, or work processes and procedures.
  • Assist with the implementation of MESH (Environmental, Safety, Security and Health) and will utilize MESH tools to drive improvements.
  • Ability to perform general maintenance (i.e electrical, mechanical, plumbing, etc)
  • Partner with HR and EHS to coordinate miscellaneous activities as needed.
  • Perform other related duties and special projects as assigned.

Skills

Forklift operation
Electrical troubleshooting
Mechanical maintenance
Reading drawings
LEAN / continuous improvement
Project support
Basic IT skills

Education

High School Diploma or GED
College degree (preferred)

Tools

CAD (SolidWorks, Fusion 360, AutoCAD)
CMMS MaintainX
Excel/Office tools
Forklift operation tools

Job description

Job Description

ATTENTION MILITARY AFFILIATED JOB SEEKERS - Our organization works with partner companies to source qualified talent for their open roles. The following position is available to Veterans, Transitioning Military, National Guard and Reserve Members, Military Spouses, Wounded Warriors, and their Caregivers. Unless specifically stated otherwise, this role is \"On-Site\" at the location detailed in the job post. Eaton’s ES AMER ESS division is currently seeking a Maintenance Technician – 2nd Shift. The hourly rate for this position is $32.40 per hour. The hours for this shift are 1:45 pm – 10:15 pm. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations.


What You’ll Do

Eaton’s DCPD division is currently seeking a Maintenance Technician on 2nd shift. We are a leader in the design and production of critical power distribution products for many specific segments. The Maintenance Technician role offers a full time work week of 40 hours and potential overtime. The Maintenance and Facilities technician will be responsible for performing industrial manufacturing mechanical system work to include layout, relocation, installation, maintenance, and repair of facilities, building mechanical systems, machinery and equipment.


In This Function You Will


  • Assist Engineers, Project Managers, and other functions on future plant or department layout proposals/ Kaizens.

  • Coordinate with Santa Ana’s building and grounds contractors as needed

  • Assist Manufacturing Engineers in the development of prototype equipment, manufacturing process, structural maintenance and equipment relocation/installation through the use of LEAN concepts. This may include physically preparing the facility for these activities.

  • Assist manufacturing operators, supervisors in troubleshooting manufacturing problems.

  • Assist other personnel with troubleshooting functions to determine most efficient method for repair of production lines and equipment.

  • Develop and implement improvements to manufacturing or front-end procedures and processes through improved layout, material handling, or work processes and procedures.

  • Assist with the implementation of MESH (Management System of Environmental, Safety, Security and Health) and will utilize MESH tools to drive improvements

  • Ability to perform general maintenance (i.e electrical, mechanical, plumbing, etc)

  • Partner with HR and EHS to coordinate miscellaneous activities as needed

  • Perform other related duties and special projects as assigned.


Qualifications


  • Minimum Education Required: High School/GED


Required (Basic)


  • Minimum of 2 years industrial/facilities maintenance experience or related experience

  • Candidates must be legally authorized to work in the United States without out company sponsorship, now or in the future.

  • No relocation benefit is being offered for this position. Only candidates within a 50-mile radius of the work location will be considered. Active Duty Military Service member candidates are exempt from the geographical area limitation

  • High school diploma or GED from an accredited institution.

  • Ability to troubleshoot and repair the following: Electrical systems, Hydraulic systems, and Pneumatic systems.

  • Troubleshoot various mechanical, control, hydraulic, fluid, and electrical systems down to the component level.

  • Experience operating a forklift

  • Ability to read and understand facility layouts and construction drawings and capable of interacting with outside contractors in the maintenance.


Preferred


  • College Degree

  • Strong problem solving and organisaqtional skills.

  • 1-3 years’ experience operating a forklift or other powered industrial trucks

  • Previous Experience in Lock Out, Tag Out Procedures

  • CAD experience (Solidworks, Fusion 360, or AutoCAD).

  • Experience with Computerized Maintenance Management Systems (CMMS – MaintainX)

  • Commercial driver’s license (CDL)


Skills


  • Working knowledge of basic computer systems including but not limited to: Excel, Word, PowerPoint, Outlook

  • Must have excellent verbal and customer relationship skills

  • Physical capability of walking up and down stairs and ladders, working on your feet for hours at a time, moving around equipment and buildings, and lifting up to 40lbs.

  • Ability to operate a forklift and scissor lift.

  • Knowledge and/or experience leading projects, conducting analysis for root cause identification, and understanding how to identify problems and reach resolutions is beneficial.


Location: Santa Ana, California.


Affiliate Sponsor: Eaton.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Maintenance Technician - 2nd Shift
Maintenance Technician - 2nd Shift

Eaton Corporation • Santa Ana (CA)

On-site
USD 37,000 - 52,000
Maintenance Technician - 1st Shift
Maintenance Technician - 1st Shift

Eaton Corporation • Santa Ana (CA)

On-site
USD 37,000 - 52,000
Quality Technician - 2nd Shift - Santa Ana, CA
Quality Technician - 2nd Shift - Santa Ana, CA

VetJobs • Santa Ana (CA)

On-site
USD 31,000 - 44,000
Maintenance Technician - 1st Shift | Benefits Day 1 | OT
Maintenance Technician - 1st Shift | Benefits Day 1 | OT

Eaton Corporation • Santa Ana (CA)

On-site
USD 37,000 - 52,000
Maintenance Mechanic - 2nd Shift
Maintenance Mechanic - 2nd Shift

Eaton Group • South Milwaukee (WI)

On-site
USD 38,000 - 55,000
Health benefits
Vacation time
Weekly pay
+7
Maintenance Tech- 2nd Shift
Maintenance Tech- 2nd Shift

Eaton Corporation • Tom Bean (TX)

On-site
USD 66,000 - 72,000
Quality Technician - 1st Shift - Santa Ana, CA
Quality Technician - 1st Shift - Santa Ana, CA

VetJobs • Santa Ana (CA)

On-site
USD 34,000 - 48,000
Full benefits
401k plan
Maintenance Technician - 2nd shift
Maintenance Technician - 2nd shift

Eaton Corporation • Worcester (MA)

On-site
USD 31,000 - 44,000
Health insurance
Dental insurance
Vacation and holidays
+1
Maintenance Mechanic - 1st Shift
Maintenance Mechanic - 1st Shift

Eaton Corporation • Omaha (NE)

On-site
USD 35,000 - 40,000
Health, Dental, Vision Insurance
Competitive compensation packages
Paid parental leave, holidays, and VAC
+2
Production Supervisor - 2nd Shift
Production Supervisor - 2nd Shift

Eaton Corporation • Santa Ana (CA)

On-site
USD 99,000 - 145,000