Maintenance Mechanic TAD

Owens Corning; Denver (CO); On-site; USD 50,000 - 68,000; Full time

Job summary

Owens Corning in Denver is seeking a Maintenance Mechanic with strong electrical, hydraulic, and PLC troubleshooting skills. The role requires reading blueprints and coordinating with outside contractors to maintain plant equipment.

The job emphasizes energy control procedures, safe operations, and a culture of continuous improvement in a manufacturing setting. Willingness to rotate shifts and work on-site is required.

Qualifications

• High school diploma or GED equivalent.
• Complete and pass electrical CD ROM training provided by plant.
• Ability to learn responsibilities of the position.
• Preferably five years in a related maintenance trade with electrical/hydraulic equipment.
• Demonstrated troubleshooting techniques and blueprints understanding.

Responsibilities

• Operate Energy Control Procedures (ECP) and Lock Tag Try (LTT) systems.
• Read blueprints and technical data references to determine methods.
• Inspect equipment to identify problems before breakdowns.
• Troubleshoot drives, PLCs, and electrical controls.
• Maintain safety and housekeeping; follow environmental policies.
• Work with outside contractors and rotate shifts as needed.

Skills

Electrical

Basic PLC

Hydraulic

Pneumatics

Blueprint reading

SAP PM

Basic welding

Teamwork

Attention to detail

Decision making

Education

High school diploma or GED

Electrical CD ROM training

Tools

Forklift operation

Hand and power tools

Job description

Maintenance Mechanic TAD

Location(s):

Denver, CO, US, 80216-1601

Function:

Manufacturing

Audience:

Hourly

Work Arrangement:

On Site

Pay rate:

$35.61-$48.61 (rate will be based on skill level)

Schedule:

6:45 am- 3:00 pm (Monday-Friday) must avaiable for off hours (rotating with other colleagues) who will cover the weekends (roughly 10-15% OT).

SUMMARY

The purpose of the Maintenance mechanic is to perform as a professional, highly skilled and exceptionally competent maintenance person. Participate in teams to develop and implement solutions.

PRINCIPAL DUTIES AND RESPONSIBILITIES:

• Energy Control Procedures (ECP's) and Lock Tag Try (LTT) system
• Respect for potential hazards within the manufacturing operation
• Training and regular auditing of the process
• Fluent in language of the plant
• Safe rigging procedures
• Forklift operation license- will provide certification
• PLC basics- Ability to use laptop for troubleshooting and see what limit switch or photo eye isn't working and ability to adjust where needed
• Troubleshooting basics, how to analyze a problem and step to the root cause
• Help reduce cycle time to problem resolution and eliminates the "replace and see what happens method"
• Process 101- basic concepts of what it takes to consistently manufacture shingles; Critical product characteristics, key process variables, customer needs etc.
• Business 101- World class manufacturing (WCM) concepts, what are they, individual and business benefits. Key business metrics and focus
• Installs, modifies or maintains plant equipment and assists in determining appropriate methods to accomplish these tasks
• Must work safely and follow all documented and "common sense" safety policies and procedures
• Read, understand, and analyze blueprints and other technical data references
• Expert use of hand and power tools
• Inspects plant equipment to identify potential problems prior to breakdown occurrences
• Complies with good housekeeping practice on the job and ensures works areas are clean and picked up after each job completion
• Follows all environmental compliance policies and programs
• Work as instructed with outside contactors
• Comply with all rules and safety regulations
• All other duties assigned or needed
• Regular attendance on site and ability to rotate to varying shifts

Mechanical:

• Machining bores, keyways, drill press, grinding lathe and mill operation
• Ability to properly, precision align belt, gear or direct coupled shafts using proper tools to specified tolerances
• Understanding of lubrication principles and bearing tolerances and basic bearing "physics"- I.E. How does it work in terms of need for extreme care, keeping clean, etc.
• Hydraulic systems understanding- hydraulic flow principles. Effects of pipe sizes and valves on pressure drops, making proper fittings per system requirements, proper valve application, etc. Applied to water systems, hot oil, and hydraulic systems
• Same as above for compressed air and steam (where applicable) systems
• Understanding of pump basics and operating characteristics including effects of suction pressures, head pressures, sealing/packing techniques
• Ability to read air and power fluid schematics
• Basic welding for all structural and piping welding for at least one craft per plant
• Pipefitting- alignment, flange, threading
• Basic electrical component "how they work" understanding solenoids, motors, and heaters
• Ultrasonic rotating equipment troubleshooting

Electrical:

• Basic industrial electrical cods
• Capability to read schematics and P&ID drawings
• Fusing, thermal overload protection, wire sizing, motor theory, etc.
• AC, DC and servo drive system (basics)
• Be able to safely conduct motor control and power circuit troubleshooting
• Understand fuse sizing, take motor amp readings, understand basic DC motor control, etc.
• Ability to fully troubleshoot drives-DC and AC variable frequency, and communicate technically with outside technical support when needed
• Ability to fully understand the various control loops in the plant including IM/APC systems and weight control equipment
• Fully competent in electrical noise avoidance-grounding, shielding, etc.
• Burner system understanding, troubleshooting and properly tuning

JOB REQUIREMENTS:

SKILLS AND ABILTIES:

The employee should hold the following abilities:

• Electrical
• Basic PLC
• Hydraulic
• Pneumatics
• Basic blueprint and schematic reading
• Proficiency in SAP PM module
• Basic welding
• Able to think under pressure and have quick decision-making skills
• Ability to work well in a team or by oneself
• Good attention to detail

COMPUTER AND SOFTWARE COMPETENCIES:

The employee must be able to:

• Basic computer skills
• Must be able to operate a computer and other keyboard instrument

EDUCATION AND/OR EXPERIENCE:

The employee should have the following:

• High school diploma or GED equivalent
• Complete and pass electrical CD rom training provided by plant
• Must be able to learn the responsibilities of this position
• Preferably five years in a related maintenance trade or occupation that involved electrical, hydraulic machinery and equipment in a manufacturing environment
• Able to demonstrate trouble-shooting techniques and have a basic understanding of blueprints
• Basic ability and knowledge of welding practices and hydraulic circuitry
• Advanced understanding of electrical circuitry
• Basic PLC knowledge
• Must have the ability to interpret instructions furnished in written, oral, diagram or schedule form
• Flair for working with large industrial machines
• Must be able to work independently or in a team atmosphere with minimal direct supervision with drive toward accomplishment and to produce high-quality work

ESSENTIAL PHYSICAL REQUIREMENT/WORK ENVIRONMENT:

The employee should possess the ability to:

• Able to do repetitive hand, arm, leg movements for several hours
• Able to climb on and off fork truck
• Ability to stand for 12 hours straight
• Able to climb and descend stairs
• Lift, push, pull 40lbs more than 100 times per day
• Must be able to squat, bend at the waist and knees freely
• Exposure to extreme temperatures
• Exposure to sounds and different noise levels
• Handle, control or feel objects, and tools or control
• Repetitive movements

It is a requirement to be a U.S. citizen OR have valid proof of authorization to work in the United States.

About Owens Corning:

Owens Corning is a branded building products leader with three complementary market-leading businesses providing roofing, insulation, and doors primarily for residential markets in North America and Europe. The company operates with an integrated go-to-market strategy and a unique set of OC Advantages - including its iconic brand, unparalleled commercial strength, leading technology, and winning cost position - to help customers win and grow in the market. Owens Corning is committed to helping build better and achieve more through winning partnerships, leading performance, and engaging people. Founded in 1938 and headquartered in Toledo, Ohio, Owens Corning is listed on the New York Stock Exchange (NYSE: OC). For more information, visit www.owenscorning.com.

Owens Corning is an equal opportunity employer. Except in limited circumstances such as formal apprenticeship programs, Owens Corning does not employ anyone under the age of 18.