Maintenance Mechanic, PLC Hardware & High-Voltage Systems (Aerospace)

Pro Services, LLC

La Porte (IN)

On-site

USD 46,000 - 48,000

Full time

5 days ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Benefits offered by this job

ESOP (employee-owned)
Medical premiums Day 1 (family and/ or
Vision and dental insurance
401(k) match
Vacation and holiday pay

Job summary

Pro Services Workforce Solutions is seeking a hands-on Maintenance Technician II for an aerospace investment casting facility in La Porte, IN. The role emphasizes electrical troubleshooting, motor and relay work, and mechanical rebuilds in a safety-focused plant.

You will triage control voltages, diagnose cabinet issues, and collaborate with engineers. On-site, first shift, with potential moves to other shifts based on plant needs.

Qualifications

  • 5–10 years industrial maintenance experience.
  • 4+ years electrical troubleshooting and repair.
  • Strong with control voltage, single-phase, and 480V three-phase systems.
  • Meter and Megger mastery; cabinet-level diagnostics.
  • Experience with motors, relays, wiring, sensors.
  • Mechanical rebuild capability: bearings, shafts, seals, gearboxes.

Responsibilities

  • Repair motors, relays, wiring, and sensors to root cause—not just the symptom.
  • Rebuild mechanical systems: bearings, shafts and seals, and gearboxes.
  • Service pneumatics and hydraulics, from pump rebuilds to proportional valves.
  • Install, assemble, inspect, and test machinery; specify spares and log work in the CMMS.
  • Coordinate with operators; partner with mechanical/electrical engineering for complex challenges.
  • Balance reactive calls with structured preventive and predictive maintenance.

Skills

Industrial maintenance
Electrical troubleshooting
Control voltage
Meter & Megger
Motors & relays
Wiring & sensors
Mechanical rebuild
CMMS
Operator communication
Reading/writing/math

Education

High school diploma or GED

Tools

Megger

Job description

Keep jet engine component production movingWhen a motor trips or a line halts, you’re the steady hand. As a multi-craft Maintenance Technician II with Pro Services Workforce Solutions, you’ll be deployed onsite at a top-tier aerospace investment casting facility in La Porte, IN. This is a hands-on, electrically focused role inside a clean, safety-centered plant where teamwork and engineering support are built in.Your missionRestore uptime fast, prevent failures before they happen, and elevate equipment reliability. You’ll triage issues from 0–24V control signals to 110–240V single-phase and 480V three-phase power, verify cabinet health with your meter and Megger, and resolve Allen-Bradley PLC hardware problems (I/O, fuses, status lights). Software changes are handled by the automation group, freeing you to master the hardware.How you’ll deliverBalance reactive calls with structured preventive and predictive maintenanceRepair motors, relays, wiring, and sensors to root cause—not just the symptomRebuild mechanical systems: bearings, shafts and seals, and gearboxesService pneumatics and hydraulics, from pump rebuilds to proportional valvesInstall, assemble, inspect, and test machinery; specify spares and log work in the CMMSCoordinate with operators; partner with mechanical/electrical engineering for complex challengesWhere you’ll thriveAerospace investment casting operation supplying world-trusted jet engine programsClean environment with rigorous, active safety programs (fall prevention, confined space)People-first culture: help each other, learn together; core values—Safety, Integrity, Pride, TeamworkNon-union; growing maintenance team with back-shift focusGrowth pathOnboarding on 1st shift—learn the plant and systems 6–9 months mentorship—work alongside senior technicians Deployment to 2nd or 3rd shift—bring your expertise to high-impact hoursShift hours: 1st 6:00 AM–2:00 PM (Mon–Fri); 2nd 2:00 PM–10:00 PM (Mon–Fri); 3rd 10:00 PM–6:00 AM (Sun–Thu). Weekend coverage every 4 weeks on your regular shift hours. Typical OT is 2.5–5 hours/week; ~17 hours on coverage weeks.What you need to succeed5–10 years industrial maintenance experience4+ years electrical troubleshooting and repairStrong with control voltage, single-phase, and 480V three-phase systemsMeter and Megger mastery; cabinet-level diagnosticsExperience with motors, relays, wiring, sensorsMechanical rebuild capability: bearings, shafts/seals, gearboxesBaseline pneumatics and hydraulics knowledgeCMMS proficiency and crisp operator communicationOperate single-man scissor liftsReading, writing, math; High school diploma or GEDBonus skillsAdvanced electrical/mechanical depth and schematic fluencyServos, VFDs, transformers, I/O modulesPLC troubleshooting, HMI, roboticsUltra-high vacuum systems and CNC equipmentPumps (positive displacement, air diaphragm, centrifugal); hydraulic cylinder rebuildsWelding: MIG, TIG, StickScissor/boom lifts and forkliftsCompensation, ownership, and benefits$33.50 – $35/hr, paid weeklyPro Services is employee-owned (ESOP)100% employer-paid medical premiums starting Day 1 (single and family)Vision and dental insurance401(k) matchVacation and holiday payPhysical reality of the workExpect 6–7 miles of walking; ~90% on your feet; ~60% walkingLifting/pushing/pulling 21–50 lbs under one-third of shift (35+ lbs via team lift or device)Frequent squatting, kneeling, crouching, bending/turning; stairs, ramps, ladders, scaffoldsVariable surfaces: wet, slippery, narrow, irregularNormal vision requirements, including color and depth perceptionBring EH-rated safety boots with metatarsal guard; uniforms and standard PPE providedEligibility & export controlMust be legally authorized to work in the United States. Visa sponsorship is not available. This position involves access to export-controlled items, and employment is conditioned on the ability to lawfully obtain access to them.How you show upYou’re self-motivated, thrive at a fast pace, and communicate clearly with operators and peers. You take ownership, adapt to shifting priorities, help teammates, and live our values—Safety, Integrity, Pride, Teamwork—every shift.Technical strengths we valuePLC hardware troubleshooting; industrial automation diagnosticsElectrical, mechanical, pneumatic, and hydraulic troubleshooting120/208/240/480 voltage systemsPreventive maintenance and inspection disciplineElectrical repair; schematic interpretationLockout/Tagout (LOTO)Maintenance and repair fundamentalsIndustrial electrical systems knowledgeAerospace manufacturing familiarityPrecision measurement and inspectionInterested?Apply now or contact Kassi Hojnacki, Talent Acquisition, Pro Services Workforce Solutions. Bring your troubleshooting mindset to an environment that invests in you.
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Industrial Maintenance Tech II
Industrial Maintenance Tech II

Pro Services, LLC • Corsicana (TX)

On-site
USD 47,000 - 52,000
Medical premiums paid by company
Vision and dental coverage
401(k) matching
+1
Industrial Maintenance Technician II
Industrial Maintenance Technician II

Pro Services Inc • La Porte (IN)

On-site
USD 46,000 - 48,000
Medical insurance premiums (Day 1)
Vision and dental insurance
401(k) matching
+1
Electro-Mechanical Maintenance Technician, Packaging Operations
Electro-Mechanical Maintenance Technician, Packaging Operations

Pro Services • Corsicana (TX)

On-site
USD 47,000 - 52,000
ESOP
Medical premiums 100% paid Day 1
Vision and dental insurance
+2
Industrial Maintenance Mechanic (Hydraulics, MIG, 480V Basics)
Industrial Maintenance Mechanic (Hydraulics, MIG, 480V Basics)

Pro Services, LLC • Georgetown Charter Township (MI)

On-site
USD 47,000 - 50,000
Industrial Maintenance Technician — Electromechanical & Controls
Industrial Maintenance Technician — Electromechanical & Controls

Hamilton Security Group • Milford (OH)

On-site
USD 30,000 - 39,000
Health insurance
Dental coverage
Vision coverage
+6
Lead Mechatronics Reliability Technician
Lead Mechatronics Reliability Technician

Mid-West Forging and Machining • Cleveland (OH)

On-site
USD 50,000 - 56,000
Medical, Dental, Vision
401(k) match
PTO from hire
+1
Multicraft Reliability Technician (Allen‑Bradley/Drives)
Multicraft Reliability Technician (Allen‑Bradley/Drives)

Pro Services, LLC • New Oxford

On-site
USD 40,000 - 54,000
Health benefits
PPE provided
Tool stipend
+3
Industrial Maintenance Technician
Industrial Maintenance Technician

Pro Services, LLC • Lancaster

On-site
USD 37,000 - 52,000
Shift differential $0.40/hr
Structured training
Tool stipend
+2
Industrial Maintenance Technician Apprentice
Industrial Maintenance Technician Apprentice

Pro Services • Indiana

On-site
USD 36,000 - 37,000
Housing during training
Per diem during training
Medical insurance (ESOP)
Industrial Automation Maintenance Technologist
Industrial Automation Maintenance Technologist

International Motors Manufacturing • Huntsville (AL)

On-site
USD 54,000 - 66,000
Sign-on bonus
Shift differential
Overtime opportunities