Maintenance Mechanic-Junior

AEP; Northern (KY); On-site; USD 95,588,000 - 99,888,000; Full time

Benefits offered by this job

Comprehensive benefits

Job summary

American Electric Power (AEP) is seeking skilled trades personnel for plant maintenance, construction, and repair roles with extensive site travel to multiple locations (Rockport IN, Dresden OH, New Haven WV, Charleston WV, Kenova WV, Louisa KY, Benton Harbor MI).

The role emphasizes scaffolding, welding, electrical work, piping, and equipment maintenance across generation, transmission and distribution facilities.

Qualifications

• Associate degree in engineering, industrial or energy technology; OR related work experience plus appropriate progression qualifications.
• Pass required certifications and a valid State driver license.
• Experience with plant maintenance, rigging and scaffolding is essential.

Responsibilities

• Inspect and assemble scaffolding, rigging and blocking.
• Perform simple welding, brazing and metal cutting in supported positions.
• Carry out electrical work including wiring and terminations up to 260V.
• Read simple prints and specifications and assist in maintenance tasks.
• Operate and maintain plant equipment and observe safety rules.

Skills

Scaffolding

Rigging

Welding

Electrical work

Blueprint reading

Machine shop tools

Conduit and wiring

Education

Associate degree in engineering/industrial energy tech

Tools

Oxyacetylene torches

Voltmeters

Clamp-on ammeters

Drill and tap

Measuring devices

Job description

Category : Technical Speciality/Skilled Trades

Job Summary

Perform work in the checking, inspecting, repair, maintenance, installation and construction of plant equipment and structures.

Job Description

This job REQUIRES travel from Homebase location 60% of the time.

Locations of travel to include:

Rockport, Indiana

Dresden, Ohio

New Haven WV

Charleston WV

Kenova WV

Louisa KY

Benton Harbor, Michigan

What you’ll do:

Essential Job Functions & Tasks

• Inspect, erect and/or remove simple scaffolding, rigging and blocking and assist in the erection or removal of extensive or complicated scaffolding, rigging and blocking.
• Use appropriate tools and perform jobs such as drill and tap holes, thread bolts, cut and thread pipe, mill and prep boiler tubes, use measuring devices required in the work, and learn to perform simple machining jobs on machine shop tools. Use layout tools such as rules, scales, straight edges, dividers, trams, squares, levels, plumb bobs and protractors to lay out plane figures on flat surfaces, such as coal conveyor wear plates, bolt holes on man covers, and flanges and holes for conduit in junction boxes.
• Perform non-code electric arc welding such as building up work surfaces on wear plates where warping is not a problem, and where adequate stock remains to prevent burning through; make tack and assembly welds in the maintenance and construction of items such as jigs, fixtures, chutes, hoppers, wear plates, and cable troughs where such welds are not required to be continuous structural welds.
• Perform metal cutting (oxyacetylene, propylene, etc.) and simple welding and brazing in the flat position. Use oxyacetylene torches, LP gas torches, and the like, for purposes of assembly or disassembly, bending, forming, or heat-treating when the configuration of the object is such that intricate control of heat application is not required, such as in the removal of couplings from service water plumps, sump pumps and bending U-straps from carbon steel.
• Perform electrical work such as pull in and terminate 2- and 3-wire conductors for lighting or fractional horsepower circuits and make repairs to same; tape electrical connections on circuits up to and including 260 volt, AC and DC on fractional horsepower equipment; use clamp-on ammeters and voltmeters; clean de-energized electrical equipment.
• Install and make repairs to masonry refractory and insulation.
• Replace and adjust valve packing, drive balls, conveyor idlers, gauges glasses, sight glasses, position/level switches, pressure gauges, manometers, pressure switches and similar devices.
• Inspect, clean, repair and reassemble as assigned: oil igniters and nozzles, pulverizers, feeders, fans, dampers, air preheaters, heat exchangers, precipitator rappers, hopper heaters & insulators, small motors, pumps, fans, slag blowers, etc.
• Clean and mask surfaces preparatory to painting; perform paintings using brushes or spray equipment with approved paints. Perform rough carpentry work, make minor repairs to brick or concrete walls and floors, perform rough plastering, replace glass and repair window and door hardware.
• Operate mobile equipment and its associated equipment and perform duties incidental to the operation of such equipment. Maintain equipment, tools and work areas in a clean and orderly condition. Obtain clearance orders and determine that the equipment to be worked on has been properly cleared and tagged. Report irregularities and abnormal conditions to supervision.
• Perform duties in accordance with the Company safety rules, operating regulations and practices. Train for and carry out assignments in firefighting, first aid or other emergency programs as required.
• Perform similar or less skilled work as assigned.

What we’re looking for:

Education requirements are listed below:

• Associate degree in engineering, industrial or energy technology; OR Associate degree in another discipline and two (2) years of related work experience; OR high school diploma with four (4) years of related work experience; OR high school diploma with two (2) years of related military experience. Related experience is listed under Principal Accountabilities. Must also have performed the duties of, and have maintained all the qualifications of the line-of-progression. Starting with EO Jr., Maintenance-line-of-progression and must be able to pass an examination, as required. Normally achieved with 1040 hours as an Equipment Operator-Jr or equivalent.

Work Experience requirement listed below:

• Must be familiar with plant maintenance, materials, practices, tools and rigging, scaffolding and blocking involved in the work.
• Must have demonstrated the ability to physically and mentally perform work in all areas and heights required.
• Must be familiar with the layout, construction, and functions of the equipment and apparatus in the plant and about the plant property.
• Must be familiar with equipment clearance procedures, rules, safety practices and procedures applicable to the work.
• Must be able to read, interpret, and work from simple prints and specifications. Must be able to learn to instruct and direct other employees.

Required License(s)/Certification(s) are listed below:

• Must obtain and maintain all necessary certifications and licenses as required.
• Must possess the appropriate State driver license.

Other preferences:

• Physical demand level is Medium
• Must be able to climb ladders & stairs a number of times each day.
• Must be able to use fine dexterity to move switches & controls to precise locations
• Must be able to detect color on alarms, equipment & other devices
• Must be able to hear announcements on the Plant PA system, and to hear abnormal sounds of plant equipment
• Must be able to communicate plant information by phone, in person or by radio
• Must be able to work on heights, grating, platforms and catwalks.
• Must be able to exert up to 50 lbs of pressure to manually turn off valves. Must be able to stand or walk continuously for up to 12 hours.

• In addition to a competitive compensation, AEP offers a unique comprehensive benefits package that aims to support and enhance the overall well-being of our employees.

At AEP, we’re more than just an energy company — we’re a team of dedicated professionals committed to delivering safe, reliable, and innovative energy solutions. Guided by our mission to put the customer first, we strive to exceed expectations by listening, responding, and continuously improving the way we serve our communities. If you're passionate about making a meaningful impact and being part of a forward-thinking organization, this is the company for you!

Compensation

$33.34 - $34.86

Physical Demands

The Physical Demand Level for this job is: M – Medium Work: Exerting 20 to 50 pounds of force occasionally, and/or 10 to 25 pounds of force frequently, and/or greater than negligible up to 10 pounds of force constantly to move objects. Physical demand requirements are in excess of those for Light Work

Equal Employment Opportunity

It is hereby reaffirmed that it is the policy of American Electric Power (AEP) to provide Equal Employment Opportunity in all respects of the employer-employee relationship including recruiting, hiring, upgrading and promotion, conditions and privileges of employment, company sponsored training programs, educational assistance, social and recreational programs, compensation, benefits, transfers, discipline, layoffs and termination of employment to all employees and applicants without discrimination because of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, veteran or military status, disability, genetic information, or any other basis prohibited by applicable law. When required by law, we might record certain information or applicants for employment may be invited to voluntarily disclose protected characteristics.

Share

Details

“Knowing that I am part of team that is making the power grid safer and more reliable gives me a real sense of responsibility and enthusiasm for coming to work every day.”

Perform all types of work involved in the construction, maintenance, rebuild, removal, operation, testing and inspection of energized or de-energized generation, transmission and distribution facilities. Assist in responding to emergency call-outs on station trouble and coordinating prompt restoration of service to customers as required. The following list sets forth the principal duties required with the degree of supervision normally given. This list is not intended to limit assignment of work or the degree of supervision under all operating conditions. Employee may perform miscellaneous, related, and incidental work in addition to that specifically outlined below. The following reference is provided as a guideline for persons responsible for directing the duties and responsibilities of assigned personnel, to assist in the safety and development of employees, and is not intended to limit assignment of work or the degree of supervision under all operating conditions: DIRECT SUPERVISION - When a qualified person is working with/hands-on with the person performing the designated task. IMMEDIATE SUPERVISION - When a qualified person is near the structure/equipment and is in constant visual and/or verbal contact to the person performing the designated task. GENERAL SUPERVISION - An employee of equal or higher classification, knowledgeable of the task at hand and not necessarily at the job site. QUALIFIED PERSON ' P&C Technician or Supervisor who is knowledgeable of the task