Maintenance Mechanic A - Fixed Equipment

Martin-Marietta-1798b2fd; Gabbs (NV); On-site; USD 54,000 - 76,000; Full time

Job summary

Martin-Marietta in Gabbs, NV is hiring a Maintenance Mechanic A - Fixed Equipment to repair and maintain plant machinery, weld as required, align gear trains, and install equipment per blueprints.

This on-site, shift-based role demands at least four years as a millwright, the ability to read blueprints, pass arc and oxy/acetylene welding tests, and the strength to lift up to 100 pounds, always under strict safety standards.

Qualifications

• Minimum four years as a millwright.
• Ability to read blueprints and equipment instructions.
• Must pass welding test (arc and oxy/acetylene).
• Strong safety awareness in maintenance work.
• Able to lift up to 100 pounds and work on multiple shifts.

Responsibilities

• Read blueprints and schematics to determine work procedures.
• Dismantle machinery using hand tools; move with hoists and dollies.
• Assemble/install equipment such as conveyors and tram rails.
• Align machines and equipment using precision tools and lasers.
• Weld, rivet, or fasten components to foundations as required.
• Lubricate and repair machinery; operate basic machine tools as needed.

Skills

Blueprint reading

Welding (arc & oxy-acetylene)

Safety compliance

Shift work readiness

Tools

Engine lathe

Milling machine

Hoists & cranes

Conveyors & belts installation

Job description

Repairs and maintains plant equipment as assigned, including electric and gas welding, hydraulics, rigging, pipe fitting, pumps, air compressors, vacuum pumps, bearings and seals, power transmissions, gear boxes, equipment settings and alignmentMaintenance Mechanic A - Fixed EquipmentJob Description:Repairs and maintains plant equipment as assigned, including electric and gas welding, hydraulics, rigging, pipe fitting, pumps, air compressors, vacuum pumps, bearings and seals, power transmissions, gear boxes, equipment settings and alignment.Job Requirements:Must have a minimum set of hand tools as specified by the Company. Previous experience must include a minimum of four years as a millwright.Job includes but is not limited to: repair of conveyor belts, bucket elevators, crushers, ball mills, screens, pumps, etc. Experience in industrial construction and/or repair may count. Must be able to read and understand blueprints and equipment instructions. Must be able to weld with enough proficiency to pass a Company welding test in both electrical arc and oxygen/acetylene welding and understand the safe handling of welding equipment. Must be able to determine what type of rod to use on different types of steel and cast iron. Must be thoroughly familiar with all aspects of safety in the maintenance field. Must be capable of working with a minimum of supervision. Must be able to work all shifts. A written test will be given as part of the company’s evaluation of aptitude for the job. All work described above to be done in an efficient and workman-like manner. This position is subject to duties as assigned.This position is subject to shift work.Additional :Job requires a thorough knowledge of the load bearing capabilities of the equipment used as well as an understanding of blueprints and technical instructions. Primary purpose of installing, maintaining, upgrading, and fabricating machinery and equipment according to layout plans, blueprints, and other drawings in industrial establishment.Typical duties include:Read blueprints and schematic drawings to determine work procedures. Dismantle machinery or equipment, using hammers, wrenches, crowbars, and other hand tools.Moves machinery and equipment, using hoists, dollies, rollers, and trucks.Assembles and installs equipment, such as shafting, conveyors, and tram rails, using hand tools and power tools.Constructs foundation for machines, using hand tools and building materials, such as wood cement, and steel.Align machines and equipment, using hoists, jacks, hand tools, squares, rules, micrometers, lasers, and plumb bobs.Assembles machinery and bolts, welds, rivets, or otherwise fastens them to foundation or other structures, using hand tools and power tools.May operate engine lathe or milling machine to grind, file, and turn machine parts to dimensional specifications.Required repair and lubricate machinery and equipment.Selects cables, ropes, chains, pulleys, winches, blocks, and sheaves, according to weight and size of load to be moved.Attaches load with grappling devices, such as loops, wires, ropes, and chains, to crane hook.Sets up, braces, and rigs hoisting equipment, using hand tools and power wrenches.May direct workers engaged in hoisting of machinery and equipment.In addition, may perform all duties of General Laborer, Skilled Laborer and Carpenter and possibly electrician.Should be able to:Work within precise limits or standards of accuracy.Follow instructions and read blueprints.Look at flat drawings or pictures and visualize how they would look as solid objects.Work at heights without fear.Use logical step-by-step procedures at work.Plan work and solve problems.Make decisions based on measurable information.Perform a variety of duties which may change often; and operate machinery.Millwrights must be physically able to:Coordinate eye-hand movements.Use hands and fingers fully; reach for, manipulate, and feel objects; stoop, kneel, crouch, and/or crawl;Climb and maintain body balance on ladders, scaffolding, or high structures; and see and hear well (either naturally or with correction);Lift and carry objects weighing up to 100 pounds.Stoop, lay, bend or squat for long periods of time.