Machinist

Johnson Service Group, Inc.

Park City (KS)

On-site

USD 32,000 - 45,000

Full time

14 days+

Get a reply from this recruiter

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Benefits offered by this job

Sign-on bonus $4,000

Job summary

Johnson Service Group is seeking an entry to mid-level CNC machinist for Level I-III operations across 3, 4 and 5 axis machines at multiple shifts in the Park City area. The role involves reading blueprints, setting up jobs, operating CNC controls, handling precision measuring tools, and maintaining quality while following EO, SPC procedures and planning changes.

Shifts include evenings and weekends with differential pay and a $4,000 sign-on bonus paid in two installments.

Qualifications

  • High School or equivalent mechanical aptitude and good work ethic desired.
  • No previous experience required.

Responsibilities

  • Follow instructions from planning, setup sheets, work instructions, shop charts and verbal instructions.
  • Set up and operate machines to produce quality parts with limited or moderate assistance.
  • Maintain quality standards and reduce defects through understanding of tools, measuring devices and calibration.
  • Perform preventive maintenance and ensure calibration of precision measuring equipment per due dates.

Skills

Multi-axis machining
Blueprint reading
Statistical Process Control
Engineering Orders
Planning Change Requests
Communication
Time management

Education

High School or equivalent

Tools

CNC machines
Precision measuring equipment

Job description

Must have multi-axis machining skills Location: Both Hoover Road and Park City Locations Multiple shifts available: Mon- Thu- 2nd Shift (M-Th:4:30PM – 3:00AM) + $1/hr. shift differential (1 opening) Weekend Days (Fri, Sat. & Sun. 6:00 AM – 6:00 PM) + $1/hr. shift differential, 4 hrs. pay to bring to 40 hrs., and paid lunch (1 opening) Weekend Nights (Fri, Sat. & Sun. 6:00 PM – 6:00 AM) + $2/hr. shift differential, 4 hrs. pay to bring to 40 hrs., and paid lunch (2 openings) Sign-On Bonus of $4,000. Below are the conditions for said bonus. You are eligible for sign-on bonus payments in the amount of $4,000, which will be payable to you in two installments. During the first payroll cycle following 90 days of employment, you will be paid a sign-on bonus of $2,000, which will be grossed up for taxes. If your employment ends for any reason prior to 90 days of employment, you will not be eligible for and forfeit any right to the sign on bonus. During the first payroll cycle following completion of one year of employment, you will be paid a 2nd sign on-bonus of $2,000, which will also be grossed up for taxes. Should you leave employment with us voluntarily or if you are fired for cause within the 24 month period following your effective start date, you agree to repay the full sign-on bonus payment(s) that have been paid to the date of your departure, including the gross up amount. In such event, you authorize NWI Wichita to deduct from your final paycheck and from any other benefits or monies owed to you the maximum amount permitted by law. You agree to pay NWI Wichita any remaining balance within thirty (30) days after your employment ends. You also agree to repay NWI Wichita for any attorney fees and costs it incurs associated with the recovery of the sign on bonus from you.

Level I 3, 4 and 5 axis machines with a variety of controls Forklifts Hoists & Overhead Cranes Precision Measuring Equipment Burr tools such as Orbital sander, Angle Grinder, Cut-off wheel, and burr knife

Become familiar and obtain knowledge of blueprints, mylars, Engineering Orders (E.O.), Statistical Process Controls (SPCs) and Planning Change Requests (PCR) Follow instructions from planning, setup sheets, work instructions, shop charts, and verbal instructions Become familiar with at least one machine or machine control and the parts produced on that machine Control CNC Programs at the machine following all procedures/protocols Setup, with full to moderate assistance, the operations required to produce a quality part Maintain quality standards focusing on learning how to reduce the number of defects due to workmanship Achieve the basic working knowledge of the various precision measuring tools used within the department Understand what to check and when to use the various precision measuring instruments to ensure a quality part is being produced Ensure all company owned precision measuring equipment is in calibration per due date Perform preventive maintenance on equipment per checklist at machine Maintain good housekeeping practices to promote a safe, well organized work area Comply with all PPE requirements, including but not limited to: safety glasses, steel toed shoes, ear plugs, hard hats, face shields and proper hand protection Proper handling and disposal of hazardous waste and chemicals as defined by supervisor/lead person as well as how to find and use the Safety Data Sheets Obtain a basic knowledge of shop math and how to apply it (SAE and Metric dimensioning) Achieve basic knowledge of the different types of tools and tool holders, as well as our tool setting procedures Demonstrate good communication with your trainer and co-workers and use time wisely Work overtime as required to meet customer schedule Learn and adhere to company policies and procedures defined in the company handbook Education & Experience High School or equivalent Mechanical aptitude and good work ethic desired Requires no previous experience.

Level II 3, 4 and 5 axis machines with a variety of controls Forklifts Hoists & Overhead Cranes Precision Measuring Equipment Burr tools such as Orbital sander, Angle Grinder, Cut-off wheel, and burr knife

Retain and perform all of Level I typical job requirements with minimal assistance based on area and degree of difficulty Capable of setting up and performing the requirements of new or difficult product families with moderate to minimal assistance Demonstrate good communication skills with supervisor/lead person, co-workers, and support departments Show and maintain value added time management skills Achieve and maintain quality throughout the entire production process by verifying customer requirements by the use of precision measuring equipment Maintain a high standard of quality by meeting or exceeding the expectations of scrap parts due to workmanship Basic shop math skills and application Become proficient on one machine or machine control with minimal assistance required to produce parts on those machines. Must also have a working knowledge of at least two other machines or machine controls Capable of training new employees on Level I tasks Ability to work with the following departments: tooling, quality, engineering, scheduling and other departments as necessary Be aware of upcoming part numbers to evaluate if problems could arise. Maintain your machine tie in to document any problems encountered during the production run and communicate these issues to Lead/Next Operator/ Person/Supervisor /Engineering/ Programming Evaluate methods to move the maximum amount of the internal setup time to external setup time and decrease production times where possible with the approval or your supervisor or lead. Troubleshoot quality problems Maintains at or above expectations on reviews and has no open reprimands Proficient at documenting Planning Change Requests, Program Prove-out sheets and RCCA documents Maintains the shop average efficiencies Education & Experience High School or equivalent Typically, five years’ experience Completion of any assigned training (Blueprint, math, SPC, etc.).

Level III 3, 4 and 5 axis machines with a variety of controls Forklifts Hoists & Overhead Cranes Precision Measuring Equipment Burr tools such as Orbital sander, Angle Grinder, Cut-off wheel, and burr knife

Retain and perform all of Level II typical job requirements with minimal assistance based on area and degree of difficulty Capable of training entry level and Level I to Level II operators Proficient at three or more machines or machine controls and can move around the department as needed to run the more complicated work Lead or assist new projects Capable of running FAI/Tool proof jobs with minimal assistance Capable of setting up and performing all the requirements of new or difficult product families with minimal assistance Ability to work closely with the following departments to maintain shop production: tooling, quality, engineering, scheduling and other departments Ability to assist CNC programmers as required to optimize programs or to build needed items to improve quality or productivity. Tool number, H number, offsets, etc. Demonstrate basic leadperson (leadership) skills, i.e. Fill in as lead person when required Demonstrate good work ethics and lead by example Evaluate setup and run documents as well as our processes and make changes as required to improve quality or productivity with the approval of lead and/or supervisor Maintain at or above average shop efficiencies Consistently scores Above Expectations on reviews No lost time Proficient at documenting Planning Change Requests, Program Prove-out sheets, RCCA documents and DRATS Be able to plan next setup(s) and ensure that the following are up-to-date and available: setup book, fixtures, cutters and tooling, etc. Education & Experience High School or equivalent Typically, a minimum of five to ten years of experience.

Johnson Service Group (JSG) is an Equal Opportunity Employer. JSG provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law. #D500

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Machinist ***$4,000 SIGNING BONUS!***
Machinist ***$4,000 SIGNING BONUS!***

NWI Aerostructures • Park City (KS)

On-site
USD 35,000 - 55,000
Signing Bonus
Multiple Shifts Available
Machinist Programmer III
Machinist Programmer III

Erickson Incorporated • Central Point (OR)

On-site
USD 47,000 - 62,000
Relocation assistance
Sign-on bonus
Shift differential
CNC II
CNC II

Johnson Service Group, Inc. • Huntington Beach (CA)

On-site
USD 48,000 - 55,000
CNC Machinist II
CNC Machinist II

Johnson Service Group, Inc. • Valencia (CA)

On-site
USD 45,000 - 65,000
CNC Machinist 2nd Shift
CNC Machinist 2nd Shift

Gleason Corporation • City of Rochester (NY)

On-site
USD 60,000 - 85,000
Senior CNC Machinist (Mills & Lathes) - Multi-Axis Expert
Senior CNC Machinist (Mills & Lathes) - Multi-Axis Expert

Automatic Data Processing, Inc. • Carson City (NV)

On-site
USD 41,000 - 54,000
CNC Programmer EIMCO
CNC Programmer EIMCO

JBT Machining • Anoka (MN)

On-site
USD 34,000 - 55,000
Medical, Dental, and Vision after 60+ 
Competitive Wellness Program, discount
Short-Term and Long-Term Disability
+8
Senior CNC Machinist - Mills or Lathes
Senior CNC Machinist - Mills or Lathes

P & F Industries • Carson City (NV)

On-site
USD 62,000 - 81,000
CNC Machinist III
CNC Machinist III

Leslie Controls • Tampa (FL)

On-site
USD 30,000 - 39,000
CNC Machinist II
CNC Machinist II

Tiffany & Co. • Cumberland (RI)

On-site
USD 60,000 - 90,000