Machine Operator Night Shift

Cornerstonebuildingbrandscareers

Martinsburg (WV)

On-site

USD 31,000 - 32,000

Full time

14 days+

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Benefits offered by this job

Benefits Start Day 1
On Demand Pay
Weekly Pay

Job summary

Cornerstonebuildingbrandscareers in Martinsburg, WV is seeking an Extrusion Associate EA3 as a training position to advance to EA4. You will learn to operate extrusion lines and produce vinyl siding products, ensuring outputs meet product specifications and quality standards.

The role requires basic mechanical aptitude, readiness to learn, and teamwork. Benefits start day one, with on‑demand pay and weekly payroll options, in a fast-paced manufacturing environment.

Qualifications

  • Six months of related or production experience is required.
  • Must read, write, and have working knowledge of machine mechanics.
  • Must have good mechanical aptitude and above-average math aptitude.
  • Must possess common sense, positive attitude, and demonstrate excellent attendance.
  • Must be quality and safety conscious, a team player.
  • Must have good communication skills and the ability to interact with people.
  • Must be able to learn to operate a computer and ten key.
  • Needs ability to use and read calipers and micrometers to within one thousandth of an inch.
  • Must be able to work quickly with product and be able to lift up to 86lbs on a continual basis above shoulder height and below the waist and ability to team lift 87 to 100lbs.

Responsibilities

  • The Extrusion Associate 3 (EA3) is a training position through which Associates may advance to the Extrusion Associate 4 (EA4) position. Through this training position, associates will learn to operate extrusion lines and produce vinyl siding products and accessories: ensuring that extruder outputs are consistent with product specifications and that quality assurance standards are maintained by inspecting finished product for consistency.
  • Associates must be in the EA3 position for a minimum of 6 months and be able to pass proficiency tests to be eligible for promotion to the EA4 position.
  • Associate must learn to verify operational status of all equipment on assigned line according to start-up check list
  • Maintain extruder and all peripheral line equipment settings to produce outputs that are consistent with product specifications
  • Perform Quality Assurance responsibilities that include conducting a variety of tests on finished product to determine product quality within an established range of performance
  • Notify Supervisory personnel of deviations for prompt and accurate correction(s)
  • Communicate with Maintenance Department and Manufacturing Shift Supervisor about machine malfunctions

Skills

Production experience
Mechanical aptitude
Reading & writing
Math aptitude
Team player
Attention to detail

Education

High School Diploma or GED

Job description

Job Details

Base Pay: $22.50 per hour, plus $1.00 per hour shift differential

Night Shift: 7 pm-7 am on a 2-2-3 Schedule

Benefits Start Day 1

On Demand Pay (Access to Your Pay When You Need It)

Weekly Pay

Duties and Responsibilities
  • The Extrusion Associate 3 (EA3) is a training position through which Associates may advance to the Extrusion Associate 4 (EA4) position. Through this training position, associates will learn to operate extrusion lines and produce vinyl siding products and accessories: ensuring that extruder outputs are consistent with product specifications and that quality assurance standards are maintained by inspecting finished product for consistency.
  • Associates must be in the EA3 position for a minimum of 6 months and be able to pass proficiency tests to be eligible for promotion to the EA4 position. Associates that are unable to pass the proficiency tests for the EA 4 position within a 12 month period will be demoted back to the position held prior to becoming an EA3.
  • Associate must learn to verify operational status of all equipment on assigned line according to start-up check list
  • Maintain extruder and all peripheral line equipment settings (embosser, sterlco, dies, MRF, etc.) to produce outputs that are consistent with product specifications
  • Perform Quality Assurance responsibilities that include conducting a variety of tests on finished product to determine product quality within an established range of performance
  • Notify Supervisory personnel of deviations for prompt and accurate correction(s)
  • Communicate with Maintenance Department and Manufacturing Shift Supervisor about machine malfunctions
  • Learn to Assist Extrusion Associate 4 with troubleshooting operational problems and adjust equipment to maintain consistency on the extrusion lines; inform QA Technician and Manufacturing Shift Supervisor(s) of problems or inefficiencies that cannot be corrected
  • Learn to Assist with extruder machine output changeovers (e.g., embossing drums, die sets) during the shift
  • Learn to conduct a variety of line/panel checks to determine product consistency, including panel thickness, width, length, radius, hook, nail hems, perforation, and weep holes
  • Perform housekeeping duties as needed such as clean up of water spills, knock-out build up in MRF cutter, and knock-out bins; maintain cleanliness of extrusion line and surrounding work area
  • Monitor Extrusion Associate 1s and 2s (Inspector/Packer) to ensure consistency and quality of product packed and application of proper packing techniques
  • Relieve line EA1s and EA2s for breaks
  • Develop communication skills so knowledge can be shared with previous and following shifts' Extrusion Associates about product quality, problems, and status of work in progress
  • Complete accurately and legibly all extrusion and quality assurance related paperwork (e.g. operational reports)
  • Refer to Production Schedule for color of product, product number and quantity to be produced
  • Locate Quality Assurance Specification from Lab to adhere to specifications for appropriate product
  • Perform all quality assurance checks according to schedule on Operational Report
  • Punch time clock before and after shift to record time worked
  • Observe health and safety practices at all times
  • Accurately performs pre-start checks, including verifying all equipment is ready for start-up
  • Perform other related duties and assignments as required
  • Maintain supplies at workstation
  • Communicate with Material Handler(s) to move full warehouse racks
  • Aid with training of new personnel in extrusion and quality assurance areas. Assist with training of temporaries and new hires in Extrusion Associate 1, 2, and 3 positions
  • Floats to relieve Extrusion Associate 1s, 2s, 3s, and 4s for breaks
  • Attend weekly shift meetings and monthly All Hands Forum, if required
  • Actively participate in all plant safety programs, depending on location
  • Notify Supervisor if proper tools are not furnished to complete job functions
  • Assist with production equipment maintenance
Qualifications
  • High School Graduate/GED
  • Six months of related or production experience is required. Must be able to perform the functions of an Extrusion Associate 1 and 2
  • Must be able to read, write and have working knowledge of machine mechanics. Must have good mechanical aptitude and above average math aptitude
  • Must possess common sense, positive attitude, and demonstrate excellent attendance
  • Must be quality and safety conscious, a team player
  • Must have good communication skills and the ability to interact with people
  • Must be detail oriented with ability to operate, read, and interpret test equipment/findings
  • Must have ability to learn to operate a computer and ten key
  • Needs ability to use and read calipers and micrometers to within one thousandth of an inch
  • Must be able to work quickly with product and be able to lift up to 86lbs on a continual basis above shoulder height and below the waist and ability to team lift 87 to 100lbs, keep colors separate, and records weights accurately
  • Must h
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Production Associate
Production Associate

Cornerstone Building Brands, Inc. • Tennessee

Hybrid
USD 35,000 - 45,000
Medical benefits
401(k)
PTO
Extrusion Operator 8pm-8am (2-2-3 Schedule)
Extrusion Operator 8pm-8am (2-2-3 Schedule)

Darnel, Inc. • Monroe (NC)

On-site
USD 22,000 - 30,000
Extrusion Operator - 1st Shift
Extrusion Operator - 1st Shift

Hampel Corp • Town of Germantown (WI)

On-site
USD 25,000 - 34,000
Sign-on bonus
Profit sharing
Machine Operator Day Shift
Machine Operator Day Shift

Cornerstone Building Brands, Inc. • Jasper (TN)

On-site
USD 39,000 - 42,000
Medical, dental, and vision benefits
PTO and paid holidays
401k and training programs
Production Associate
Production Associate

Cornerstone Building Brands, Inc. • Montgomery (AL)

On-site
USD 24,796 - 30,307
On Demand Pay
Quarterly incentives
Extrusion Technician - 1st Shift
Extrusion Technician - 1st Shift

Hampel Corp. • Town of Germantown (WI)

On-site
USD 28,000 - 36,000
Sign-on bonus up to $2,000
Profit sharing up to 15%
Extrusion Operator
Extrusion Operator

Custom Staffing Services, Inc. • Evansville (IN)

On-site
USD 25,000 - 36,000
Extrusion Technician - 1st Shift
Extrusion Technician - 1st Shift

L T Hampel Corp • Village of Germantown (WI)

On-site
USD 28,000 - 39,000
Sign-on bonus up to $2,000
Profit sharing up to 15% pre-tax
Extrusion Technician - 1st Shift
Extrusion Technician - 1st Shift

Hampel Corp • Town of Germantown (WI)

On-site
USD 25,000 - 39,000
Sign-on bonus up to $2,000
Pre-tax profit sharing up to 15%
Extrusion Machine Operator (Day Shift)
Extrusion Machine Operator (Day Shift)

Indorama Ventures Sustainable Recycling • Dallas (TX)

On-site
USD 38,000 - 54,000