Machine Operator - Draw, Straighten, and Cut (DSC)

Acme

Lancaster (Lancaster County)

In loco

USD 37.000 - 41.000

Tempo pieno

8 giorni fa

Aumenta le possibilità di ricevere una risposta da questo datore di lavoro

Il tuo curriculum e una lettera di presentazione personalizzati, che corrispondono esattamente a ciò che sta cercando.

Supera i filtri ATS

Vantaggi offerti da questo lavoro

Bonus incentives
Health insurance
Dental insurance
Vision insurance
401(k)
Paid holidays

Descrizione del lavoro

All America Threaded Products is seeking a skilled Machine Operator - Draw, Straighten, and Cut (DSC) for on-site, full-time work in Lancaster, PA. The role starts at $27 per hour during training, rising to $30 per hour after successful completion (typically 90 days).

Bonus incentives range from $200 to $500 per month, with a comprehensive benefits package including health, dental, life, and 401(k). Responsibilities include operating and maintaining DSC equipment, performing setups and

Competenze

  • Must be able to operate and troubleshoot DSC machinery safely.
  • Must be mechanically inclined with ability to learn equipment with electrical/pneumatic components.
  • Able to stand 8–12 hours and lift up to 75 lbs.
  • Prior experience with steel-processing equipment is a plus.

Mansioni

  • Operate DSC machine to draw, straighten, and cut steel rod.
  • Perform setup duties, die changeovers, and preventive maintenance.
  • Load/unload materials and assist with changeovers.
  • Troubleshoot stoppages and verify product quality.
  • Maintain clean, organized workspace and follow safety standards.

Conoscenze

Machine operation
Mechanical aptitude
Safety compliance
Quality checks
Stand for long shifts
Teamwork

Strumenti

Forklifts
Overhead cranes
Die changeovers
Gauges & tape measures

Descrizione del lavoro

Machine Operator - Draw, Straighten, and Cut (DSC)
Locations

Showing 1 location

Lancaster, PA 17601, USA

  • On-site
  • Full-Time
  • Requisition #: MACHI001845
Description

All America Threaded Products has several opportunities available for a skilled Machine Operator - Draw, Straighten, and Cut (DSC)! The starting pay for this position is $27 per hour during training, with advancement to $30 per hour once training is successfully completed, plus Bonus Incentives ($200-$500 per month). This position is eligible for our full benefits package, including health, dental, life, and 401(k). This is a Full-Time, on-site position at our facility in Lancaster, PA. This is an opportunity for a mechanically inclined operator to develop specialized skills in steel-processing equipment and advance based on demonstrated capability.

Pay Range: $27per hour during training, $30per hour upon successful completion of training (typically 90 days). Qualification includes demonstrating the ability to safely operate the equipment, complete setups and changeovers, verify product quality, make routine adjustments, and troubleshoot common stoppages.

Training Shift: Monday - Thursday from 6:00 a.m. - 4:30 p.m.

Production Shift: Alternating days in a 2-2-3 rotating schedule (week 1 working Mon, Tue, Sat, Sun; week 2 working Wed, Thu, Fri). Candidates must be available to complete training on the Monday-Thursday training shift and transition to the rotating production schedule upon qualification.

Bonus Incentives: $200-$500 per month

Benefits: Medical, dental, vision, short-term and long-term disability, 401(k), and paid holidays and vacation.

Job Duties and Responsibilities:

All America Threaded Products is a leading manufacturer of threaded products, and due to our continued growth, we are currently seeking DSC machine operators. A DSC machine draws, straightens, and cuts steel rod to length in preparation for our threading machines. This electrically driven equipment includes multiple pneumatic components and requires regular adjustments to maintain safe, consistent operation. Our DSC machine operators keep the machines loaded with raw material, perform tooling changeovers, make adjustments to correct imperfections in finished products, and troubleshoot stoppages. This position requires more than loading material and monitoring production. Operators must learn to recognize equipment and product issues, make appropriate adjustments, and troubleshoot common machine stoppages. This is a hands-on production position. Operators are responsible for running the machine throughout the shift in addition to completing setups, changeovers, adjustments, and troubleshooting. Primary responsibilities include:

  • Adhering to all safety standards.
  • Beginning the shift with a machine walk-around, performing the pre-operation checklist, and ensuring the machine is in good working order.
  • Verifying material types, confirming work orders match raw materials, recording scrap, and confirming finished products meet work order requirements and quality standards.
  • Performing setup duties, die changeovers, and preventive maintenance.
  • Loading and unloading the machine, both manually and by using forklifts and overhead cranes.
  • Troubleshooting stoppages, performing quality checks, and maintaining a clean, well-organized workspace.
Who we are seeking in an applicant:

This position operates in a manufacturing environment where hearing protection and steel-toed shoes are required. Safety is non-negotiable. Operators will be required to stand for the majority of an 8-12-hour shift. We are seeking a mechanically inclined applicant with experience and/or education operating, setting up, or troubleshooting machines with electrical and pneumatic components. Experience with wire, bar, tube, or coil-processing equipment, roll forming, cut-to-length lines, stamping setup and operation, industrial maintenance, or other manually adjusted, setup-intensive manufacturing equipment may be a good fit for this position. Other qualifications include:

  • Ability to work independently and make sound decisions.
  • Proficiency using gauges, tape measures, and other basic hand tools.
  • Familiarity with and willingness to follow warehouse and manufacturing safety standards.
  • Ability to lift up to 75 lbs. and work in a physically demanding position.
  • Willingness to spend most of the workday on your feet.
  • What we value most of all is a good attitude, reliability, and punctuality.
Who we are:

In June of 2010, Acme formed All America Threaded Products (AATP) by combining the operations of five acquisitions made in the threaded products industry. AATP manufactures and distributes a wide variety of threaded products including threaded rod, studs, anchor bolts, U-bolts and specials. AATP has custom product manufacturing capabilities to meet specific needs for various applications in numerous industries. With a large in-stock inventory of a variety of materials and finishes, AATP has the ability to deliver the necessary threaded products for any application. AATP offers flexible business solutions providing value to our customers. In-house capabilities, such as cutting, finishing, plating, drawing, bending, welding and packaging, have been developed to support our customers’ needs. Services such as custom packaging, flexible stocking options, in-stock inventory and fast and convenient shipping make working with AATP a great experience.

Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws.For further information, please review the Know Your Rights notice from the Department of Labor.

Ottieni la revisione del curriculum gratis e riservata.

o trascina qui il file.

Similar jobs

Offerte di lavoro simili che vale la pena confrontare

Machine Operator - Draw, Straighten, and Cut (DSC)
Machine Operator - Draw, Straighten, and Cut (DSC)

All America Threaded Products • Lancaster

In loco
USD 37.000 - 41.000
Health insurance
Dental insurance
Life insurance
+3
Machine Operator - Draw, Straighten, and Cut (DSC
Machine Operator - Draw, Straighten, and Cut (DSC

ACME Manufacturing Company Inc. • Denver (CO)

In loco
USD 30.000 - 42.000
Health insurance
Dental
Life insurance
+4
Maintenance Mechanic
Maintenance Mechanic

All America Threaded Products • Lancaster

In loco
USD 62.000 - 71.000
Medical insurance
Dental insurance
Vision insurance
+5
Quality Technician
Quality Technician

All America Threaded Products, Inc. • Lancaster

In loco
USD 28.000 - 30.000
Full benefits package
Health insurance
Dental insurance
+2
Warehouse Associate
Warehouse Associate

All America Threaded Products • Lancaster

In loco
USD 25.000 - 32.000
Benefits package (health, dental, life
401(k)
Bonus incentives: $200-$500 per month
Warehouse Associate
Warehouse Associate

Acme • Lancaster

In loco
USD 25.000 - 32.000
Health insurance
Dental insurance
401(k)
DSC Machine Operator — $30/hr + Benefits (On-Site)
DSC Machine Operator — $30/hr + Benefits (On-Site)

Acme • Lancaster

In loco
USD 37.000 - 41.000
Bonus incentives
Health insurance
Dental insurance
+3
Warehouse Associate
Warehouse Associate

Acme Manufacturing Company, Inc. • Lancaster

In loco
USD 25.000 - 32.000
Health insurance
Dental insurance
Life insurance
+3
Cold Heading Operator A: $5K Sign-On + Relocation
Cold Heading Operator A: $5K Sign-On + Relocation

Penn ENG • Pennsylvania

Ibrido
USD 52.000 - 69.000
Medical & Employer Paid: Dental and V​
Vision
401k and Employer Match
+9
Cold Heading/ Thread Rolling Operator A
Cold Heading/ Thread Rolling Operator A

PennEngineering • Pennsylvania

In loco
USD 52.000 - 69.000
Medical & Employer Paid: Dental and V​
Vision
401k and Employer Match
+9