Machine Operator 2 - SMT Operator/Rework

Celestica; Maple Grove (MN); On-site; USD 28,929 - 35,817; Full time

Job summary

Celestica in Maple Grove, MN is seeking a Machine Operator 2 to set up and operate SMT equipment, inspect products to IPC-A-610 Class 3, and follow process documents. You will work with engineers to prepare NPI products and may perform occasional hand soldering and X-Ray inspection to verify joints.

Required is High School or equivalent with manufacturing exposure and the ability to read blueprints. Certification in J-STD and IPC-610 is preferred; a path for growth and training is available.

Qualifications

• Experience with set-up, operation and troubleshooting of surface mount technology and microscope soldering.
• SMT equipment programming is desirable.
• Must pass J-STD and IPC-610 certification to perform duties.
• Fluent in reading blueprints.

Responsibilities

• Set up and operate SMT machines and inspect products per IPC-A-610 Class 3.
• Maintain solder paste stencils and ensure even screen printing.
• Replenish SMT components, verify placement, values and polarity.
• Follow documentation and review routings for correct programs.
• Perform X-Ray inspection to ensure customer requirements.
• May train other employees and assist in orientation of new staff.
• Perform rework using rework machines and occasional hand soldering.

Skills

SMT setup and troubleshooting

SMT programming

IPC-610 certification

Blueprint reading

Education

High School diploma or equivalent

Tools

AXI X-Ray

Glenbrook

Air-Vac rework station

Job description

Job Title: Machine Operator 2
Location: Maple Grove, Minnesota, USA

Summary

Setup and operate SMT machines and inspect product to IPC‑A‑610 & J‑STD‑001 Class 3. Follow all process documentation and diagnose defects or problems when presented.

Detailed Description

• Maintains and aligns solder paste stencils, applies solder paste to achieve an even and consistent screen print on all apertures.
• Replenishes and controls SMT components in a pick and place machine, verifies component positioning, values and polarity. Fills in process documentation to be complete and accurate.
• Able to follow process/program documentation developed by Engineering to properly process lead or lead‑free solder assemblies for acceptable solder joints on each solder connection on the assembly. Review routings against prints to ensure consistency. Verify correct programs and revisions are called out on routers.
• Responsible for the monitoring of floor stock inventory such as solder paste and monitoring expiration dates and informing Supervisor or Lead when low or expired.
• Follow preventative maintenance schedules on equipment, clean and perform PMs. Responsible for identifying when further maintenance is needed.
• Learn machine part parameters and programs to ensure optimization of machine time usage. Is able to produce a quality product on a timely basis per print and routings.
• Work with engineers and technicians to set up and run NPI products through any of the soldering processes performed by machines or associates.
• Periodic hand soldering under a scope is required for solder touch up and product review of solder joints. Uses basic hand tools, special fasteners, soldering iron and measuring devices. May be required to measure and record product data.
• Perform X‑Ray inspection using the AXI or Glenbrook to ensure the product meets customer expectations.
• Perform rework using the Air‑Vac rework machine.
• Will perform hand soldering work while using a scope; some components may be necessary to tin (add solder to solderable surfaces) prior to SMT placement.
• May be required to train other employees and assist in orientation of new employees.

Knowledge / Skills / Competencies

• Related experience in set‑up, operation and troubleshooting of surface mount technology and microscope soldering.
• Experience in programming of SMT equipment is highly desirable.
• Will be required to pass J‑STD & IPC‑610 Certification to be qualified to perform the job duties of a Surface Mount Machine Operator.
• Follows oral and written instructions, and must be fluent at reading blueprints.

Physical Demands

• Work may involve repetitive motion and is performed primarily in a standing position, may require sitting, twisting and stooping positions.
• Job duties require working with and around chemicals.
• While performing the duties of this job, the employee is regularly exposed to odors and warm temperatures.
• Visual exams are required pre‑hire and biennial to confirm visual acuity of 20/20 with or without glasses along with passing a standard color vision exam.
• Must be able to perform job functions while using a scope.

Typical Education

High School education or equivalent, plus one year similar manufacturing experience required.

Compensation Data

The hourly range described in this posting is an estimate by the Company, and may change based on several factors. Hourly Range: $21.00–$26.00.

Notes

This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.

Equal Employment Opportunity

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or status as a protected veteran.

Celestica's policy on equal employment opportunity prohibits discrimination based on race, color, creed, religion, national origin, gender, sexual orientation, gender identity, age, marital status, veteran or disability status, or other characteristics protected by law.

This policy applies to hiring, promotion, discharge, pay, fringe benefits, job training, classification, referral and other aspects of employment and also states that retaliation against a person who files a charge of discrimination, participates in a discrimination proceeding, or otherwise opposes an unlawful employment practice will not be tolerated. All information will be kept confidential according to EEO guidelines.