Integrated Circuits (IC) Sr. Design Engineer

Samtec

Chandler (AZ)

On-site

USD 120,000 - 180,000

Full time

8 days ago

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Samtec, a global interconnect solutions provider, seeks an Integrated Circuits (IC) Senior Design Engineer in Chandler, AZ. You will design and develop microwave, analog, digital, and mixed-signal circuits for RF and gigabit data communications, from architecture to tape-out and testing.

Responsibilities include LNA/PA/VGA/VCO/PLL/ADC/DAC/ CD R blocks, layout supervision, and collaboration with test teams to verify performance. A Bachelor’s in EE and 5+ years in IC design are required.

Qualifications

  • Minimum 5 years of experience designing microwave, analog, digital, and mixed-signal ICs.
  • Experience with SiGe and CMOS processes, 130 nm and below.
  • Proficiency with Cadence Virtuoso for simulation, schematics and layouts.

Responsibilities

  • Performs/Leads custom IC design on SiGe and CMOS processes, particularly at 130 nm process technologies and below, including schematic capture, IC layout, simulation, package analysis, evaluation board design, and design verification at the circuit block and full-chip levels.
  • Design of microwave/RF/mixed-signal blocks including LNA, PA, VGA, VCO, PLL, ADC, DAC, and CDR from specification to tape-out.
  • Develop test plan and perform measurements to verify design intent has been met using electronics test equipment including oscilloscopes, VNAs, BERTs, and communications analyzers.
  • Design of optical communications circuits including TIA, CTLE, and laser drivers.
  • Design of precision supporting circuits including bandgap voltage reference, current sources, op amps, and feedback circuits.
  • Design of power management blocks such as linear or switching regulators.
  • IC layout execution and supervision of IC layout design specialists.
  • Works with characterization and test engineering to define, conduct, and analyze data from product performance characterization through report documentation.
  • Documents all relevant product and design information through the design review process and to provide guidance on product usage.
  • Customer support as needed including on-site customer engagements, especially with internal customers.

Skills

SiGe/CMOS IC design
RF/Microwave circuit design
Cadence Virtuoso
Schematic capture & layout

Education

Bachelor's Degree in Electrical Engineering

Tools

Cadence Virtuoso (Layout/Schematics)

Job description

Integrated Circuits (IC) Sr. Design Engineer

Founded in 1976, Samtec is a privately held, $1 Billion global manufacturer of a broad line of electronic interconnect solutions, including High-Speed Board-to-Board, High-Speed Cables, Mid-Board and Panel Optics, Precision RF, Flexible Stacking, and Micro/Rugged components and cables. Samtec Technology Centers are dedicated to developing and advancing technologies, strategies and products to optimize both the performance and cost of a system from the bare die to an interface 100 meters away, and all interconnect points in between. With 40+ international locations and products sold in more than 125 different countries, Samtec’s global presence enables its unmatched customer service.


Summary/Objective: The Integrated Circuit Engineer designs and develops microwave, analog, digital, and mixed-signal circuits for implementation on IC foundry processes for RF and gigabit-per-second data communications applications.IC development tasks include the architecture definition, circuit design, synthesis, physical layout, verification, packaging and testing of hardware prototypes and high-volume IC products.


Essential Functions/Responsibilities:



  • Performs/Leads custom IC design on SiGe and CMOS processes, particularly at 130 nm process technologies and below, including schematic capture, IC layout, simulation, package analysis, evaluation board design, and design verification at the circuit block and full-chip levels.

  • Design of microwave/RF/mixed-signal blocks including LNA, PA, VGA, VCO, PLL, ADC, DAC, and CDR from specification to tape-out.

  • Develop test plan and perform measurements to verify design intent has been met using electronics test equipment including oscilloscopes, VNAs, BERTs, and communications analyzers.

  • Design of optical communications circuits including TIA, CTLE, and laser drivers.

  • Design of precision supporting circuits including bandgap voltage reference, current sources, op amps, and feedback circuits.

  • Design of power management blocks such as linear or switching regulators.

  • IC layout execution and supervision of IC layout design specialists.

  • Works with characterization and test engineering to define, conduct, and analyze data from product performance characterization through report documentation.

  • Documents all relevant product and design information through the design review process and to provide guidance on product usage.

  • Customer support as needed including on-site customer engagements, especially with internal customers.


* The responsibilities as defined are intended to serve as a general guideline for this position.Associates may be asked to perform additional tasks depending on strengths and capabilities.*


Experience:



  • A minimum of 5 years’ experience designing and developing microwave, analog, digital, and mixed-signal integrated circuits.

  • Experience using the Cadence Virtuoso design suite for simulation and creating schematics, symbols, and layouts.

  • Extensive design experience for frequencies above 25 GHz.Experience with PAM4 designs is a major plus.

  • Laboratory measurement skills (analog, high-speed I/O, as required).

  • Strong organizational skills with attention to details.

  • Communications skills are a must as this person will interact with engineers in different disciplines as well as with members of management.

  • Must be able to sit/stand for at least 90 consecutive minutes, and not suffer from any sensory deprivation and/or paralysis of the limbs.


Education:



  • Bachelor's Degree in Electrical Engineering, Physics, equivalentdiscipline, or equivalent work experience.


We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Integrated Circuits (IC) Sr. Design Engineer
Integrated Circuits (IC) Sr. Design Engineer

SAMTEC, INC • New Albany (IN)

On-site
USD 120,000 - 180,000
Integrated Circuits (IC) Sr. Design Engineer
Integrated Circuits (IC) Sr. Design Engineer

Samtec Inc • Chandler (AZ)

On-site
USD 120,000 - 170,000
Integrated Circuits (IC) Sr. Design Engineer
Integrated Circuits (IC) Sr. Design Engineer

Samtec, Inc. • New Albany (IN)

On-site
USD 120,000 - 190,000
Senior IC Design Engineer: RF/Analog & 25+ GHz
Senior IC Design Engineer: RF/Analog & 25+ GHz

Samtec, Inc. • New Albany (IN)

On-site
USD 120,000 - 190,000
Senior IC Design Engineer: Microwave & RF (130nm)
Senior IC Design Engineer: Microwave & RF (130nm)

SAMTEC, INC • New Albany (IN)

On-site
USD 120,000 - 180,000
Senior RF & Mixed-Signal IC Design Engineer
Senior RF & Mixed-Signal IC Design Engineer

Samtec Inc • Chandler (AZ)

On-site
USD 120,000 - 170,000
Hardware Engineer
Hardware Engineer

SAMTEC, INC • San Diego (CA)

On-site
USD 160,000 - 220,000
Bonuses paid 3x/year
Comprehensive benefits package
Equal Opportunity Employer
Senior IC Design Engineer - RF/Mixed-Signal ICs
Senior IC Design Engineer - RF/Mixed-Signal ICs

Samtec • Chandler (AZ)

On-site
USD 120,000 - 180,000
Signal Integrity (SI) Test Engineer
Signal Integrity (SI) Test Engineer

Samtec • New Albany (IN)

On-site
USD 80,000 - 110,000
Optoelectronics R&D Technical Leader
Optoelectronics R&D Technical Leader

SAMTEC, INC • Santa Clara (CA)

On-site
USD 176,000 - 220,000
Bonuses paid three times per year
Medical benefits
401K match