Integrated Circuits (IC) Sr. Design Engineer

Samtec Inc

Chandler (AZ)

On-site

USD 120,000 - 170,000

Full time

7 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Samtec, Inc. is seeking an Integrated Circuit Engineer to design microwave, analog, digital, and mixed-signal ICs for RF and gigabit data applications. You will lead layout, simulation, and verification using Cadence Virtuoso, and drive design reviews from concept to tape-out.

Strong collaboration with multi-disciplinary teams is essential. Minimum 5 years of IC design experience and a Bachelor's in Electrical Engineering are required.

Qualifications

  • Minimum 5 years designing and developing microwave, analog, digital, and mixed-signal ICs.
  • Experience with 130 nm and below processes is mentioned.
  • Strong communications skills to interact with engineers and management.

Responsibilities

  • Lead design of microwave/RF/mixed-signal blocks from specification to tape-out.
  • Perform schematic capture, layout, simulation, and verification.
  • Develop test plans and perform measurements with electronic test equipment.
  • Document design information and support customer engagements as needed.

Skills

Microwave IC design
Analog/digital/mixed-signal design
Cadence Virtuoso

Education

Bachelor's Degree in Electrical Engineering

Tools

Cadence Virtuoso

Job description

Position at Samtec, Inc Founded in 1976, Samtec is a privately held, $1 Billion global manufacturer of a broad line of electronic interconnect solutions, including High-Speed Board-to-Board, High-Speed Cables, Mid-Board and Panel Optics, Precision RF, Flexible Stacking, and Micro/Rugged components and cables. Samtec Technology Centers are dedicated to developing and advancing technologies, strategies and products to optimize both the performance and cost of a system from the bare die to an interface 100 meters away, and all interconnect points in between. With 40+ international locations and products sold in more than 125 different countries, Samtec’s global presence enables its unmatched customer service.

Description Founded in 1976, Samtec is a privately held, $1 Billion global manufacturer of a broad line of electronic interconnect solutions, including High-Speed Board-to-Board, High-Speed Cables, Mid-Board and Panel Optics, Precision RF, Flexible Stacking, and Micro/Rugged components and cables. Samtec Technology Centers are dedicated to developing and advancing technologies, strategies and products to optimize both the performance and cost of a system from the bare die to an interface 100 meters away, and all interconnect points in between. With 40+ international locations and products sold in more than 125 different countries, Samtec’s global presence enables its unmatched customer service.

Summary/Objective

The Integrated Circuit Engineer designs and develops microwave, analog, digital, and mixed-signal circuits for implementation on IC foundry processes for RF and gigabit-per-second data communications applications. IC development tasks include the architecture definition, circuit design, synthesis, physical layout, verification, packaging and testing of hardware prototypes and high-volume IC products.

Essential Functions/Responsibilities
  • Performs/Leads custom IC design on SiGe and CMOS processes, particularly at 130 nm process technologies and below, including schematic capture, IC layout, simulation, package analysis, evaluation board design, and design verification at the circuit block and full-chip levels.
  • Design of microwave/RF/mixed-signal blocks including LNA, PA, VGA, VCO, PLL, ADC, DAC, and CDR from specification to tape-out.
  • Develop test plan and perform measurements to verify design intent has been met using electronics test equipment including oscilloscopes, VNAs, BERTs, and communications analyzers.
  • Design of optical communications circuits including TIA, CTLE, and laser drivers.
  • Design of precision supporting circuits including bandgap voltage reference, current sources, op amps, and feedback circuits.
  • Design of power management blocks such as linear or switching regulators.
  • IC layout execution and supervision of IC layout design specialists.
  • Works with characterization and test engineering to define, conduct, and analyze data from product performance characterization through report documentation.
  • Documents all relevant product and design information through the design review process and to provide guidance on product usage.
  • Customer support as needed including on-site customer engagements, especially with internal customers.
  • The responsibilities as defined are intended to serve as a general guideline for this position. Associates may be asked to perform additional tasks depending on strengths and capabilities.*
Experience
  • A minimum of 5 years’ experience designing and developing microwave, analog, digital, and mixed-signal integrated circuits.
  • Experience using the Cadence Virtuoso design suite for simulation and creating schematics, symbols, and layouts.
  • Extensive design experience for frequencies above 25 GHz. Experience with PAM4 designs is a major plus.
  • Laboratory measurement skills (analog, high-speed I/O, as required).
  • Strong organizational skills with attention to details.
  • Communications skills are a must as this person will interact with engineers in different disciplines as well as with members of management.
  • Must be able to sit/stand for at least 90 consecutive minutes, and not suffer from any sensory deprivation and/or paralysis of the limbs.
Education
  • Bachelor's Degree in Electrical Engineering, Physics, equivalent discipline, or equivalent work experience.

SAMTEC, Inc. is an Equal Opportunity Employer and committed to creating a diverse environment. All employment decisions at Samtec are based in business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, pregnancy or parental status, age, disability, sexual orientation, gender and/or gender identity/expression, marital status, past or present military service, family medical history or genetic information, or any other status protected by applicable laws. Privacy Policy: https://www.samtec.com/about/legal/#privacyrightspage

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Integrated Circuits (IC) Sr. Design Engineer
Integrated Circuits (IC) Sr. Design Engineer

SAMTEC, INC • New Albany (IN)

On-site
USD 120,000 - 180,000
Integrated Circuits (IC) Sr. Design Engineer
Integrated Circuits (IC) Sr. Design Engineer

Samtec, Inc. • New Albany (IN)

On-site
USD 120,000 - 190,000
Integrated Circuits (IC) Sr. Design Engineer
Integrated Circuits (IC) Sr. Design Engineer

Samtec • Chandler (AZ)

On-site
USD 120,000 - 180,000
Senior IC Design Engineer: RF/Analog & 25+ GHz
Senior IC Design Engineer: RF/Analog & 25+ GHz

Samtec, Inc. • New Albany (IN)

On-site
USD 120,000 - 190,000
Senior IC Design Engineer: Microwave & RF (130nm)
Senior IC Design Engineer: Microwave & RF (130nm)

SAMTEC, INC • New Albany (IN)

On-site
USD 120,000 - 180,000
Signal Integrity (SI) Test Engineer
Signal Integrity (SI) Test Engineer

Samtec • New Albany (IN)

On-site
USD 80,000 - 110,000
Optoelectronics R&D Technical Leader
Optoelectronics R&D Technical Leader

SAMTEC, INC • Santa Clara (CA)

On-site
USD 176,000 - 220,000
Bonuses paid three times per year
Medical benefits
401K match
PCB Fabrication & Supplier Engineer (Eng III)
PCB Fabrication & Supplier Engineer (Eng III)

Samtec Inc • Mechanicsburg

On-site
USD 120,000 - 180,000
Senior RF & Mixed-Signal IC Design Engineer
Senior RF & Mixed-Signal IC Design Engineer

Samtec Inc • Chandler (AZ)

On-site
USD 120,000 - 170,000
Optoelectronics R&D Technical Leader
Optoelectronics R&D Technical Leader

Samtec • Santa Clara (CA), San Diego (CA), Colorado Springs (CO)

On-site
USD 176,000 - 220,000
Annual bonus (3x/year)
Comprehensive medical/dental/vision