Inspector - Petroleum

Camin-Cargo-Contro; Pasadena (TX); On-site; USD 25,000 - 39,000; Full time

Job summary

Camin Cargo Control is seeking a Petroleum Inspector to perform sampling, pipeline transfers, inventories, and barge inspections under the supervision of a Senior Inspector in Pasadena, TX. The role requires a High School Diploma, basic math skills, and safety certifications, with the ability to work independently in varied outdoor conditions.

Responsibilities include maintaining equipment, performing API-based field calculations, and reporting to the Operations Department.

Qualifications

• Requires a High School Diploma (or equivalent) with good math skills and a minimum three months of inspection experience.
• Must complete Inspector level training and pass tests and field evaluations.
• Must have or obtain IFIA certification after gaining at least six months of industry experience.
• Must maintain a valid TWIC card and a vehicle, valid driver's license, insurance and registration.
• Must be dependable, able to work independently and maintain professional relationships with clients.
• Must meet site-specific physical requirements to access facilities.

Responsibilities

• Acts as a Company representative in the field per policies and procedures and coordinates with Operations to receive work orders and schedules.
• Maintains communication with Operations, terminals, and vessel to avoid delays or conflicts.
• Obtains, labels and transports samples to the laboratory as required by each job assignment.
• Maintains inspection equipment and ensures proper calibration and storage.
• Measures products (gauge and temperature) and performs field calculations per API standards; submits reports to Operations in a timely manner.
• Performs specialized inspection services such as loss control, wall washings or confined space entry after required training.
• Assists in training Probationary and Junior Inspectors.

Skills

Math skills

Independent work

Communication

Education

High School Diploma or equivalent

Job description

If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Management/Ops - Pasadena Full-time Regular Hrly Non Exempt Stan Pasadena, TX, Pasadena, TX, US

Petroleum Inspector

Camin Cargo Control is a value-based organization that stands for more than just providing mission critical services. The Company’s core principles of fairness, integrity and excellence have been the foundation upon which the organization was built.

• Fairness: Approach situations in an open, consistent, and ethical manner with fairness, sincerity, and honesty
• Integrity: Create an empowered, engaging, and accountable culture focused on client service
• Excellence: Always strive for excellence through continuous process improvement, best practices to achieve superior results and the creation of opportunities to benefit all stakeholders

Position Summary

Performs sampling, pipeline transfers, inventories and barge inspections including line condition surveys. Performs vessel inspections under the direct supervision of a Senior Inspector. Certifies that field assignments conform to company policies and procedures as well as job specific instructions supplied by the Operations Department. As company field representative, acts in a professional and dignified manner to maintain the company’s respected and trusted reputation.

• Requires a High School Diploma (or equivalent) with good math skills and a minimum three months of inspection experience.
• Must complete Inspector level training and pass corresponding theoretical tests and field evaluations.
• Must have or obtain IFIA certification after gaining at least six months of industry experience.
• Must maintain a valid Transportation Worker’s Identification Card (TWIC). Possess and maintain a vehicle in good working order, a valid driver’s license, vehicle insurance and registration.
• Must be dependable, able to work independently and be able to effectively communicate and maintain professional relationships with numerous clients (i.e., terminal and vessel/barge personnel).
• Must pass company defined physical requirements. Must meet and maintain site-specific requirements mandated by customers and/or terminals to have access to all facilities.

Responsibilities

As instructed by the Operations Department and under the strict guidelines described in the Inspection and ASTM/API manuals:

• Acts as a Company representative in the field. Must be able to perform duties and responsibilities as per company policies and procedures. Maintains regular contact with Operations Department to receive work orders and schedules.
• Effectively communicates all aspects of assigned job duties. Maintains regular contact with Operations Department, terminals, and vessel to avoid delays or conflicts.
• Obtains, labels and transports samples to the laboratory in a timely manner as required by each specific job assignment.
• Maintains assigned inspection equipment in good working order and ensures equipment is properly calibrated and stored.
• Measures (gauge and temperature) products and performs all required field calculations per the API Standards, completes all required field documentation and submits reports to the Operations Department in a timely manner.
• Performs specialized inspection services such as loss control, wall washings or confined space entry upon receiving required training.
• Assists in the training of Probationary and Junior Inspectors.

Fitness for Duty – Physical Demands

Workday may consist of 8-12 hours; however, this can vary day to day or shift to shift. Much of the work is performed outdoors, wearing full Personal Protective Equipment (PPE) and could include possible exposure to high and low temperatures for prolonged duration of time. Work may be performed during day or nighttime hours and may involve working alone.

All times listed below are approximate.

Maximum Lift-Floor to knee; Knuckle to waist; Waist to shoulder

Weight Up to 45 lbs.- Duration/Day Up to 2 hours.

Weight Up to 45 lbs. -Duration/Day Up to 6 hours

Weight Variable-Duration/Day Up to 2 hours

Weight Up to 45 lbs.- Duration/Day Up to 4 hours

Weight Up to 45 lbs.- Duration/Day Up to 2 hours

Extended Reach

Weight Up to 45 lbs.- Duration/Day Up to 1 hour

Weight Up to 45 lbs.- Duration/Day Up to 6 hours

Weight Up to 45 lbs.- Duration/Day Up to 1 hour

Weight 5-8 lbs. Duration/Day Up to 4 hours

Sitting

Weight N/A-Duration/Day Up to 6 hours

Driving-

Weight N/A- Duration/Day Up to 4 hours

All are required to perform this position.

This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed, or used without prior written consent from Camin. All rights reserved.

Petroleum Inspector

Camin Cargo Control is a value-based organization that stands for more than just providing mission critical services. The Company’s core principles of fairness, integrity and excellence have been the foundation upon which the organization was built.

• Fairness: Approach situations in an open, consistent, and ethical manner with fairness, sincerity, and honesty
• Integrity: Create an empowered, engaging, and accountable culture focused on client service
• Excellence: Always strive for excellence through continuous process improvement, best practices to achieve superior results and the creation of opportunities to benefit all stakeholders

Position Summary

Performs sampling, pipeline transfers, inventories and barge inspections including line condition surveys. Performs vessel inspections under the direct supervision of a Senior Inspector. Certifies that field assignments conform to company policies and procedures as well as job specific instructions supplied by the Operations Department. As company field representative, acts in a professional and dignified manner to maintain the company’s respected and trusted reputation.

Minimum Requirements

• Requires a High School Diploma (or equivalent) with good math skills and a minimum three months of inspection experience.
• Must complete Inspector level training and pass corresponding theoretical tests and field evaluations.
• Must have or obtain IFIA certification after gaining at least six months of industry experience.
• Must maintain a valid Transportation Worker’s Identification Card (TWIC). Possess and maintain a vehicle in good working order, a valid driver’s license, vehicle insurance and registration.
• Must be dependable, able to work independently and be able to effectively communicate and maintain professional relationships with numerous clients (i.e., terminal and vessel/barge personnel).
• Must pass company defined physical requirements. Must meet and maintain site‑specific requirements mandated by customers and/or terminals to have access to all facilities.

Responsibilities

As instructed by the Operations Department and under the strict guidelines described in the Inspection and ASTM/API manuals:

• Acts as a Company representative in the field. Must be able to perform duties and responsibilities as per company policies and procedures. Maintains regular contact with Operations Department to receive work orders and schedules.
• Effectively communicates all aspects of assigned job duties. Maintains regular contact with Operations Department, terminals, and vessel to avoid delays or conflicts.
• Obtains, labels and transports samples to the laboratory in a timely manner as required by each specific job assignment.

• Maintains assigned inspection equipment in good working order and ensures equipment is properly calibrated and stored.
• Measures (gauge and temperature) products and performs all required field calculations per the API Standards, completes all required field documentation and submits reports to the Operations Department in a timely manner.
• Performs specialized inspection services such as loss control, wall washings or confined space entry upon receiving required training.
• Assists in the training of Probationary and Junior Inspectors.

Fitness for Duty – Physical Demands

Workday may consist of 8-12 hours; however, this can vary day to day or shift to shift. Much of the work is performed outdoors, wearing full Personal Protective Equipment (PPE) and could include possible exposure to high and low temperatures for prolonged duration of time. Work may be performed during day or nighttime hours and may involve working alone.

All times listed below are approximate.

Maximum Lift-Floor to knee; Knuckle to waist; Waist to shoulder

Weight Up to 45 lbs.- Duration/Day Up to 2 hours.

Walking-

Weight Up to 45 lbs. -Duration/Day Up to 6 hours

Pushing-Pulling

Weight Variable-Duration/Day Up to 2 hours

Carrying

Weight Up to 45 lbs.- Duration/Day Up to 4 hours

Ascend/Descend Ladder/Stair

Weight Up to 45 lbs.- Duration/Day Up to 2 hours

Extended Reach

Weight Up to 45 lbs.- Duration/Day Up to 1 hour

Standing

Weight Up to 45 lbs.- Duration/Day Up to 6 hours

Crouch/Squat/Knee

Weight Up to 45 lbs.- Duration/Day Up to 1 hour

Tool use

Weight 5-8 lbs. Duration/Day Up to 4 hours

Sitting

Weight N/A-Duration/Day Up to 6 hours

Driving-

Weight N/A- Duration/Day Up to 4 hours

All are required to perform this position.

This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed, or used without prior written consent from Camin. All rights reserved.

4 days on 4 days off (Rotational) / 12-hour shifts