Injection Molding Process Technician

Revere Plastics Systems

Fraser (MI)

On-site

USD 25,000 - 39,000

Full time

5 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Benefits offered by this job

Competitive hourly pay
Medical/HSA benefits
401(k)
Paid time off
Uniform service
Boot allowance

Job summary

Revere Plastics Systems in Fraser, MI seeks a hands-on Injection Molding Technician to keep presses running and quality on target. You’ll perform mold changes, tune machines, and respond quickly to alarms while documenting every step.

This role requires 2–3 years in plastics molding, the ability to read blueprints, and safe forklift operation. You’ll work overtime as needed and contribute to continuous improvement initiatives. Competitive hourly pay with full benefits and 401(k) are included.

Qualifications

  • High school diploma or GED required.
  • 2–3 years hands-on plastic injection molding experience, including mold changes.
  • Ability to read blueprints, setup sheets, and technical documents.
  • Forklift operation with safety rules adherence.
  • Willingness to work overtime and flexible shifts.
  • Knowledge of thermoplastics and tooling safety.

Responsibilities

  • Drive uptime and overall equipment effectiveness by monitoring processes.
  • Set up, starting, stopping, and troubleshooting injection molding presses and auxiliary systems.
  • Execute mold changes end-to-end: install tooling, hook up utilities, confirm mold protection and safety settings.
  • Capture, adjust, and maintain process parameters per Master Setup Sheets and specs.
  • Perform first-piece and in-process checks with calipers and gauges.
  • Respond to alarms, quality concerns, and disruptions to sustain quality and uptime.
  • Escalate equipment issues and coordinate with maintenance to resolve promptly.
  • Maintain 5S and document setup sheets, downtime notes, and ERP transactions.

Skills

Forklift operation
Blueprints interpretation
Troubleshooting equipment
Quality awareness
Safety compliance

Education

High School Diploma or GED

Tools

Calipers
Measuring gauges

Job description

Day-in-the-lifeWhen your shift begins, you’ll walk the floor, check machine centers, and read the latest handoff notes. You’ll bring lines up smoothly, verify that every press is running to spec, and jump in fast if alarms, quality alerts, or material issues pop up. Throughout the day, you’ll swap out molds with precision, fine-tune processes for stability, and keep documentation clean and current—always with a target of zero defects.What you’ll take ownership ofDriving uptime and overall equipment effectiveness by monitoring processes, minimizing unplanned downtime, and dialing in efficiencies across all machine centers.Setting up, starting, stopping, and troubleshooting injection molding presses along with auxiliary systems.Executing mold changes end-to-end: install and align tooling, hook up utilities, and confirm mold protection and safety settings are correct.Capturing, controlling, and maintaining process parameters per Master Setup Sheets and approved specifications.Loading, confirming, and adjusting key variables—temperatures, pressures, transfer positions, cycle times, and material drying conditions.Watching production in real time and making adjustments to sustain quality and keep machines running at peak performance.Responding quickly to quality concerns, operator questions, machine alarms, and other process disruptions.Diagnosing defects such as short shots, flash, burns, splay, and warpage; identifying root causes and implementing corrective actions.Cutting scrap and nonconforming output through process improvements, corrective actions, and coordination of mold maintenance.Performing first-piece and in-process checks with calipers, gauges, and other metrology tools.Contributing to quality targets, including reductions in both external and internal PPM.Verifying all safety features—interlocks, switches, drop bars, guarding—are functional before and during production.Following safety practices without compromise: PPE, OSHA, LOTO, hazardous materials handling, and safe lifting.Safely operating forklifts, pallet jacks, overhead cranes, and related material handling equipment when certified and authorized.Escalating equipment issues and partnering with maintenance to resolve them promptly.Confirming material identity, lot traceability, drying specs, and correct handling of virgin and regrind.Keeping documentation accurate and timely: setup sheets, process logs, downtime notes, scrap records, and ERP transactions.Participating in mold change and setup reduction activities to lift throughput, uptime, and OEE.Maintaining 5S standards and a clean, organized work area.Communicating process changes, quality notes, and shift updates to supervisors and the next crew.Coaching Process Technicians, Operators, and peers on standards, quality expectations, and safe work practices.Supporting continuous improvement across safety, quality, delivery, productivity, and cost.Pitching in on other related tasks as assigned.QualificationsRequiredHigh School Diploma or GED.Proven track record working effectively, efficiently, and safely in a high-volume manufacturing setting.Ability to multitask in a fast-paced environment and follow written work instructions.Must pass written and performance testing for hi-lo (forklift) operation.Forklift experience and strict adherence to all forklift safety rules.Minimum 2–3 years of hands-on plastic injection molding experience, including mold changeovers.Solid understanding of thermoplastics, mold setup, tooling safety, and processing.Ability to read and interpret blueprints, setup sheets, and technical documents.Strong mechanical aptitude and troubleshooting skills.Willing to work overtime as needed and flexible shifts, including nights and weekends.Preferred5+ years in plastics manufacturing performing similar responsibilities.Knowledge of IATF-aligned production and quality control practices.Experience training others.History of contributing to safety and continuous improvement initiatives.Familiarity with scientific molding methods (e.g., RJG, Decoupled Molding).Physical demands and work environmentLift, carry, push, or pull up to 50 lbs.Stand, stoop, twist, climb, and perform repetitive tasks for extended periods (8–12 hours).Bend forward and downward at the waist 45° or more; bend below the waist or to floor level.Work near hot molds, presses, cranes, industrial equipment, and within tight spaces.Use hands/fingers to grasp and manipulate parts and tools.Reach overhead and at/below shoulder height.Ascend/descend ramps and stairs.Hear and distinguish speech and other sounds (e.g., machine alarms); frequent work near machinery with moderate noise.Close vision (20 inches or less) and color differentiation.Hands-on duties comprise roughly 60–80% of the role, with the balance at a desk/computer.Facility temperatures can reach up to 90°F; must be comfortable in hot and cold conditions.Work independently with limited supervision.Remain stationary 50%–100% of the time as tasks require.Get on/off forklifts and standing lifts; access trailers, steps, ladders, etc.No aversion to heights.Frequent exposure to moving mechanical parts, fumes, vibration, and potential electrical hazards, including high, precarious locations.BenefitsCompetitive hourly pay based on skills and experience.Comprehensive benefits, including free medical/HSA coverage for employees earning under $75,000 annually who elect individual coverage.401(k) retirement plan.Generous paid time off and company holidays.No-cost weekly uniform service.Annual boot allowance for qualified safety toe footwear.Extensive hands-on exposure to varied molds and tooling challenges, fostering continuous learning.Accessibility & complianceThe requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Frequency of duties, percent of time and work year may vary based on department or building assignment.
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Injection Molding Process Technician
Injection Molding Process Technician

Revere Plastics Systems, LLC • Fraser (MI)

On-site
USD 25,000 - 36,000
Competitive hourly pay
Comprehensive medical coverage / HSA
401(k) retirement plan
+3
Process Technician
Process Technician

Revere Plastics Systems, LLC • Fraser (MI)

On-site
USD 28,000 - 41,000
Competitive hourly pay
Comprehensive benefits including high-
401(k) retirement plan
+4
Injection Molding Process Optimization Technician
Injection Molding Process Optimization Technician

MDI Custom Injection Molding • Bedford (OH)

On-site
USD 30,000 - 41,000
401(k) with company match
Paid vacation and holidays
Comprehensive benefits
Thermoplastic Injection Molding Operations Supervisor
Thermoplastic Injection Molding Operations Supervisor

Ambrit Engineering - USA • Santa Ana (CA)

On-site
USD 85,000 - 120,000
401(k)
Health Insurance
Vision Insurance
+4
Mold Repair/Tooling Technician
Mold Repair/Tooling Technician

Revere Plastics Systems • Jeffersonville (IN)

On-site
USD 30,000 - 39,000
Competitive hourly pay
Medical/HSA coverage for under $75k
401(k) retirement plan
+3
Process Technician (Injection Molding)
Process Technician (Injection Molding)

Shelby American, Inc. • Houston (TX)

On-site
USD 40,000 - 70,000
Process Technician
Process Technician

HW Staffing • Reedsville (PA)

On-site
USD 70,000 - 100,000
Plastics Processing Technician, Validation & Tooling
Plastics Processing Technician, Validation & Tooling

STERIS - Operations • Conroe (TX)

On-site
USD 75,000 - 110,000
401(k) match
Paid time off
Holiday pay
+4
Process Technician Molding
Process Technician Molding

Syndicate Sales • Kokomo (IN)

On-site
USD 42,000 - 64,000
Mold Setter/ Process Technician- 2nd Shift
Mold Setter/ Process Technician- 2nd Shift

TI Automotive • Leitchfield (KY)

On-site
USD 30,000 - 41,000