Industrial Maintenance Technician New Jersey

AHU Technologies Inc.; Washington (District of Columbia); On-site; USD 4,822,000 - 6,888,000; Full time

Benefits offered by this job

401(k) matching

Dental insurance

Health insurance

Opportunity for advancement

Paid time off

Vision insurance

Job summary

AHU Technologies Inc. in Clifton, NJ, seeks an Electro-Mechanical Technician III/IV to maintain, troubleshoot, repair, and optimize industrial production equipment.

This hands-on role requires strong electrical and mechanical troubleshooting skills; you will perform preventive and corrective maintenance, identify root causes, and support safe, efficient production. Four 10-hour shifts weekly, with overtime opportunities.

Qualifications

• Minimum 3–5+ years of industrial maintenance experience.
• Must be at least 18 years of age.
• Associate degree, technical diploma, or trade certification in Electro-Mechanical Technology, Industrial Maintenance, Industrial Electronics, Mechatronics, or related field.
• Equivalent hands-on experience may be considered.
• Strong knowledge of electrical and mechanical systems.
• Experience with AC/DC motors, motor controls, VFDs, control panels, and 480V three-phase systems.
• Experience troubleshooting PLC-controlled equipment.
• Ability to read ladder logic, electrical schematics, wiring diagrams, P&IDs, and mechanical drawings.
• Working knowledge of pneumatic, hydraulic, steam, compressed-air, and boiler systems.
• CMMS experience preferred.
• Knowledge of LOTO procedures and NFPA 70E electrical safety standards.
• Strong troubleshooting and problem-solving skills.
• Good communication and organizational skills.
• Ability to work independently and as part of a team.
• Ability to lift up to 50 lbs.
• Ability to work in industrial environments involving heights, confined spaces, varying temperatures, and outdoor conditions.

Responsibilities

• Diagnose and repair electrical, mechanical, pneumatic, hydraulic, and steam systems.
• Troubleshoot equipment failures and identify root causes with minimal supervision.
• Read and interpret electrical schematics, wiring diagrams, ladder logic, P&IDs, and mechanical drawings.
• Install, troubleshoot, and maintain electrical systems and control wiring up to 480V three-phase.
• Maintain and troubleshoot: motors, motor controls, VFDs, PLCs, sensors, control panels, electrical circuits.
• Perform preventive and predictive maintenance on industrial washers, dryers, ironers, conveyors, boilers, compressors, pumps, and other production machinery.
• Document maintenance activities, work orders, parts usage, and equipment history using CMMS.
• Follow OSHA requirements and safety procedures, including LOTO and arc-flash safety.
• Collaborate with operations, engineering, and maintenance teams to resolve equipment issues.
• Provide guidance and on-the-job training to less experienced technicians when needed.

Skills

Electrical Troubleshooting

Mechanical Maintenance

PLC Troubleshooting

Ladder Logic

VFDs & Motor Controls

Pneumatics & Hydraulics

Steam & Boiler Systems

Preventive Maintenance

CMMS

Electrical Schematics

Mechanical Drawings

Root Cause Analysis

LOTO & Safety

Installation & Commissioning

Equipment Reliability

Problem Solving

Education

Electro-Mechanical Technology

Industrial Maintenance

Industrial Electronics

Mechatronics

Related technical field

Tools

CMMS

Job description

Benefits:

• 401(k) matching
• Dental insurance
• Health insurance
• Opportunity for advancement
• Paid time off
• Vision insurance

Location:

Location: Clifton, NJ
Work Type: On-Site
Job Type: Full-Time
Visa Status: US Citizens and Green Card Holders only
Experience: 3–5+ Years Industrial Maintenance Experience
Schedule: 4-Day Workweek – Four 10-Hour Shifts
Hours: 40+ Hours/Week + Overtime Opportunities
Salary: $35.00–$50.00/hour, based on skills, experience, and qualifications

Position Overview

We are seeking a skilled Electro-Mechanical Technician III/IV to maintain, troubleshoot, repair, and optimize industrial production equipment.

This is a hands-on industrial maintenance role requiring strong electrical and mechanical troubleshooting skills. The technician will perform preventive and corrective maintenance, troubleshoot equipment breakdowns, identify root causes, minimize downtime, and support a safe and efficient production environment.

Key Responsibilities

• Diagnose and repair electrical, mechanical, pneumatic, hydraulic, and steam systems.
• Troubleshoot equipment failures and identify root causes with minimal supervision.
• Read and interpret:
  • Electrical schematics
  • Wiring diagrams
  • Ladder logic
  • P&IDs
  • Mechanical drawings
• Install, troubleshoot, and maintain electrical systems and control wiring up to 480V three-phase.
• Maintain and troubleshoot:
  • Motors
  • Motor controls
  • VFDs
  • PLCs
  • Sensors
  • Control panels
  • Electrical circuits
• Perform preventive and predictive maintenance on:
  • Industrial washers
  • Dryers
  • Ironers
  • Conveyors
  • Boilers
  • Compressors
  • Pumps
  • Other production machinery
• Troubleshoot and maintain pneumatic, hydraulic, compressed-air, steam, and boiler systems.
• Repair and replace pumps, valves, cylinders, bearings, belts, chains, and other mechanical components.
• Document maintenance activities, work orders, parts usage, and equipment history using CMMS.
• Follow OSHA requirements and safety procedures, including LOTO and arc-flash safety.
• Participate in safety inspections and continuous improvement initiatives.
• Identify recurring equipment issues and recommend reliability improvements.
• Assist with equipment installations, upgrades, renovations, expansions, commissioning, and capital improvement projects.
• Collaborate with operations, engineering, and maintenance teams to resolve equipment issues.
• Provide guidance and on-the-job training to less experienced technicians when needed.
• Maintain equipment according to manufacturer specifications and maintenance standards.
• Safely operate forklifts, scissor lifts, and other maintenance equipment.
• Work at heights, outdoors, and in varying weather conditions when required.
• Occasionally travel between facilities as needed.

Equipment & Systems

The technician may work with:

• Industrial Washers & Dryers
• Ironers & Finishing Equipment
• Conveyor Systems
• Boilers & Steam Systems
• Air Compressors
• Pumps & Motors
• PLC-Controlled Equipment
• VFDs & Motor Controls
• Pneumatic & Hydraulic Systems
• Electrical Control Systems

Qualifications & Requirements

• Minimum 3–5+ years of industrial maintenance experience.
• Must be at least 18 years of age.
• Associate degree, technical diploma, or trade certification in:
  • Electro-Mechanical Technology
  • Industrial Maintenance
  • Industrial Electronics
  • Mechatronics
  • Related technical field
• Equivalent hands-on experience may be considered.
• Strong knowledge of electrical and mechanical systems.
• Experience with:
  • AC/DC motorsMotor controls
  • VFDs
  • Control panels
  • 480V three-phase electrical systems
• Experience troubleshooting PLC-controlled equipment.
• Ability to read and interpret ladder logic.
• Ability to read electrical schematics, wiring diagrams, P&IDs, and mechanical drawings.
• Working knowledge of pneumatic, hydraulic, steam, compressed-air, and boiler systems.
• CMMS experience preferred.
• Knowledge of LOTO procedures and NFPA 70E electrical safety standards.
• Strong troubleshooting and problem-solving skills.
• Good communication and organizational skills.
• Ability to work independently and as part of a team.
• Ability to lift up to 50 lbs.
• Ability to work in industrial environments involving heights, confined spaces, varying temperatures, and outdoor conditions.

Key Skills

• Electro-Mechanical Troubleshooting
• Industrial Maintenance
• Electrical Troubleshooting
• Mechanical Maintenance
• PLC Troubleshooting
• Ladder Logic
• VFDs & Motor Controls
• 480V Three-Phase Electrical Systems
• Pneumatics & Hydraulics
• Steam & Boiler Systems
• Preventive & Predictive Maintenance
• CMMS
• Electrical Schematics
• Mechanical Drawings
• Root Cause Analysis
• LOTO & Electrical Safety
• Equipment Installation & Commissioning
• Equipment Reliability
• Problem Solving

Compensation & Benefits

• $35.00–$50.00/hour
• Paid Time Off (PTO)
• Paid Holidays
• Medical Insurance
• Dental Insurance
• Vision Insurance
• 401(k) Retirement Plan with Company Match
• Company-Paid Life Insurance
• Long-Term Disability Coverage
• Company-Provided Uniforms
• Ongoing Training & Professional Development
• Career Advancement Opportunities
• Overtime Opportunities

Work Environment

This is a hands-on industrial maintenance position in a fast-paced production environment. The role requires extended periods of standing, walking, bending, lifting, and working around operating machinery.

The technician may also work at heights, in confined spaces, outdoors, and in varying temperatures. Strict adherence to safety procedures and proper use of PPE is required.

Additional Information

• Occasional work outside the regular schedule may be required based on operational needs.
• Strong focus on safety, equipment reliability, and production continuity.
• Four 10-hour shifts per week, with 40+ hours and overtime opportunities.