Industrial Maintenance Tech (3rd Shift)

Focus; Kansas City (MO); On-site; USD 55,000 - 75,000; Full time

Job summary

Focus in Kansas City, MO is seeking an experienced Dairy Industrial Maintenance Mechanic to repair and maintain mechanical, air, electrical and hydraulic systems across processing and material handling equipment. You will read blueprints, wiring diagrams and service manuals, using hand and power tools, welders, and precision instruments.

Applicants should handle hot and cold environments, work in wet/humid conditions, and perform tests after repairs to ensure proper operation.

Qualifications

• Must be able to arc and heli arc weld.
• Extensive experience with 3-phase wiring, electrical controls, programmable controllers.
• Experience with hydraulic systems and machine repair.

Responsibilities

• Repair and maintain mechanical, air, electrical and hydraulic components of processing and material handling equipment.
• Inspect machines to locate malfunctions and test operation after repair.
• Dismantle machines to access problem areas and replace worn parts.
• Align components, such as spindles and clutches, following diagrams and manuals.
• May modify computer-controlled functions on equipment.

Skills

arc welding

heli-arc welding

3-phase wiring

electrical controls

programmable controllers

troubleshooting

Tools

Welders

Hand tools

Power tools

Job description

Core Requirements:

• Welding - Must be able to arc and heli arc weld.


• Electrical - Must possess extensive experience with 3-phase wiring, electrical controls, programmable controllers, and must possess strong trouble shooting abilities.


• Hours: Start times may vary, normally 8 ½ hour shifts per day. (Overtime may be required)

The Dairy Industrial Maintenance Mechanic shall be responsible for, but not limited to, the following:

Repairs and maintains mechanical, air, electrical and hydraulic components of various equipment such as processing, blow molding, filling and material handling equipment, following blueprints, wiring diagrams and specifications and using hand tools, power tools, welders and precision measuring instruments.

Visually inspects and listens to machines and equipment to locate causes of malfunctions. Dismantles machines and equipment to gain access to problem area, using hand tools and power tools. Inspects and measures parts to detect wear, misalignment, or other problems. Removes and replaces worn or defective parts of drive mechanism or hydraulic system, using hand tools and power tools, and following blueprints, diagram, and service manuals. Re-aligns and adjusts components, such as spindles and clutches, using hand tools and following diagrams. Locates damaged air and hydraulic pipes on machine, and measures, cuts, threads, and installs new pipe. Starts machines and equipment to test operation following repair. Repairs broken parts, using brazing, soldering, and welding equipment and hand tools. May modify computer-controlled functions on various equipment.

Must be able to work in both very hot (more than 100 degrees) and very cold (20 degrees below zero) and in a very wet and humid environment for extended periods of time. Must be able to bend, crawl, climb, squat, and work on times both above the head and at ground level during repair and maintenance operations. Must keep work area safe and clean and work in a safe and efficient manner.

Will be required to work with and understand boilers, refrigeration, hydraulic, air, electrical, and other systems in the plant.

Must be able to follow both written and verbal instructions and follow blueprint, wiring diagrams and service manuals and fill out written reports.