I&E Tech

Patriot Advertising Sourcing Solutions; Carlsbad (NM); On-site; USD 55,000 - 85,000; Full time

Job summary

Patriot Advertising Sourcing Solutions in Carlsbad, NM seeks an I&E Technician to install, repair, and overhaul electronic and electrical equipment and controls. The role requires troubleshooting control systems, DCS/PLC, and reading complex electrical drawings.

The successful candidate will have a high school diploma or GED, with preferred technical training or apprenticeship in instrumentation and 5+ years of electrical experience in energy-related settings.

Qualifications

• High school diploma or G.E.D. equivalent is required.
• Graduation from a technical trade school and/or completion of an apprenticeship, certification or associate degree program in instrumentation or related studies is preferred.
• Journeyman electrical designation is highly preferred.
• 5 or more years of electrical and instrumentation experience is recommended, preferably in an energy-related industry.
• Must have a thorough knowledge of electrical codes and is familiar with AC voltage (120-480) three-phase and single-phase plus 24 VDC.
• Must be available to work rotating 14 day on/14 day off schedule and stay in company provided housing during shift rotation.
• Must be able to assume responsibility, prioritize and respond to multiple tasks under potentially stressful and/or hazardous conditions.
• Possess a strong commitment to personal and job safety.
• Must demonstrate strong mechanical aptitude and dexterity in the use of tools and equipment.
• Basic computer skills including spreadsheet and word processing applications.
• Good verbal and written communication skills, decision-making skills and strong work ethic.
• Must have the ability to read at a level to understand written safety procedures, work procedures, blueprints, P&IDs, work permits, and technical instruction manuals.
• Willing to work overtime and handle callouts.
• Candidate to live or relocate within 1 hour of reporting location.
• Strong math and logic skills including the ability to troubleshoot program PLC and other computer-based operations systems.
• A self-motivated individual able to work independently or in a team environment and willing to learn.
• Must be able to demonstrate sound judgment with the ability to make decisions and corrections when problems are detected.
• Candidate must have good organizational skills.
• Works indoors and outdoors in and around industrial and electrical equipment.
• Works in temperature extremes due to weather conditions and operating equipment.
• Uses physical force to lift, push, pull and hold equipment and tools.
• Climbs and works at various heights and may work in a standing, sitting, lying down, crouched, or kneeling position.
• Routinely reacts to visual, aural, and other signals, including alarms and instructions, and is required to visually inspect work.
• May work in confined spaces (i.e. tanks, between compressors, vessels).
• Must be able to regularly bend, stoop, move from ground level to higher levels, raise/lift from ground level and lift up to 50 lbs., apply up to 100-foot pounds of torque.
• Must have ability to get in and out of vehicles regularly and ride over rough roads.
• Must wear special safety equipment while working and must be able to lift and put on emergency breathing apparatus and/or protective equipment.

Responsibilities

• Participates in installing all instrumentation and electrical components safely.
• Troubleshoots problems with control systems and complex equipment, gas turbine, generators, and gas chromatography.
• Runs conduit, pulls wire, changes motors and maintains lighting systems and basic motor controls.
• May maintain, modify, and troubleshoot Distributive Control Systems (DCS) and/or Programmable Logic Controllers (PLC) to maximize use of control technology and minimize installation and operating costs.
• Maintains advanced monitoring devices (gas, flame, or fire detectors, vibration, and temperature monitors).
• Is able to read P&ID and electrical diagrams and other complex electrical drawings; interprets plant electrical diagrams. Updates electrical drawings.
• Installs, troubleshoots, and maintains end devices, alarms, shutdown systems, process controls, substation and branch feeders, variable frequency drives, air/fuel controllers, panel boards, etc.
• Performs preventative and general maintenance on electronic and pneumatic equipment and parts associated with this equipment.
• Provides training and technical support as required.

Job description

The I & E Technician job is located in Carlsbad, New Mexico modifies, repairs, or overhauls electronic and electrical equipment and controls. Applies knowledge of electronics principles in determining equipment malfunctions and applies skills in restoring equipment to operation. Other responsibilities include, but are not limited to:

• Participates in installing all instrumentation and electrical components safely.
• Troubleshoots problems with control systems and complex equipment, gas turbine, generators, and gas chromatography.
• Runs conduit, pulls wire, changes motors and maintains lighting systems and basic motor controls.
• May maintain, modify, and troubleshoot Distributive Control Systems (DCS) and/or Programmable Logic Controllers (PLC) to maximize use of control technology and minimize installation and operating costs.
• Maintains advanced monitoring devices (gas, flame, or fire detectors, vibration, and temperature monitors).
• Is able to read P&ID and electrical diagrams and other complex electrical drawings; interprets plant electrical diagrams. Updates electrical drawings.
• Installs, troubleshoots, and maintains end devices, alarms, shutdown systems, process controls, substation and branch feeders, variable frequency drives, air/fuel controllers, panel boards, etc.
• Performs preventative and general maintenance on electronic and pneumatic equipment and parts associated with this equipment.
• Provides training and technical support as required.

Qualifications

The successful candidate will meet the following qualifications:

• High school diploma or G.E.D. equivalent is required.
• Graduation from a technical trade school and/or completion of an apprenticeship, certification or associate degree program in instrumentation or related studies is preferred.
• Journeyman electrical designation is highly preferred.
• 5 or more years of electrical and instrumentation experience is recommended, preferably in an energy-related industry.
• Must have a thorough knowledge of electrical codes and is familiar with AC voltage (120-480) three-phase and single-phase plus 24 VDC.
• Must be available to work rotating 14 day on/14 day off schedule and stay in company provided housing during shift rotation.
• Must be able to assume responsibility, prioritize and respond to multiple tasks under potentially stressful and/or hazardous conditions.
• Possess a strong commitment to personal and job safety.
• Must demonstrate strong mechanical aptitude and dexterity in the use of tools and equipment.
• Basic computer skills including spreadsheet and word processing applications.
• Good verbal and written communication skills, decision-making skills and strong work ethic.
• Must have the ability to read at a level to understand written safety procedures, work procedures, blueprints, P&IDs, work permits, and technical instruction manuals.
• Willing to work overtime and handle callouts.
• Candidate to live or relocate within 1 hour of reporting location.
• Strong math and logic skills including the ability to troubleshoot program PLC and other computer-based operations systems.
• A self-motivated individual able to work independently or in a team environment and willing to learn.
• Must be able to demonstrate sound judgment with the ability to make decisions and corrections when problems are detected.
• Candidate must have good organizational skills.
• Works indoors and outdoors in and around industrial and electrical equipment.
• Works in temperature extremes due to weather conditions and operating equipment.
• Uses physical force to lift, push, pull and hold equipment and tools.
• Climbs and works at various heights and may work in a standing, sitting, lying down, crouched, or kneeling position.
• Routinely reacts to visual, aural, and other signals, including alarms and instructions, and is required to visually inspect work.
• May work in confined spaces (i.e. tanks, between compressors, vessels).
• Must be able to regularly bend, stoop, move from ground level to higher levels, raise/lift from ground level and lift up to 50 lbs., apply up to 100-foot pounds of torque.
• Must have ability to get in and out of vehicles regularly and ride over rough roads.
• Must wear special safety equipment while working and must be able to lift and put on emergency breathing apparatus and/or protective equipment.

EOE