I&E QC Inspector

MAV Project Services

Houston (TX)

On-site

USD 90,000 - 150,000

Full time

14 days+

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Benefits offered by this job

PTO 108 hrs/yr
401(k) match
Health insurance

Job summary

MAV Project Services in Houston is seeking a Contractor Constructor Supervisor and Inspector to support control engineering projects, conduct on-site inspections, and generate daily reports while ensuring compliance with safety and environmental standards.

You will act as the owner agent, review and approve client work, supervise construction, manage redlines, and assist with commissioning through field verification and documentation improvements.

Qualifications

  • Minimum of 10 years work history as an Electrician or Instrument Technician.
  • Preferably 5+ years construction supervision with an I&E construction company.
  • Working knowledge of PHSMA, OSHA and industry standards related to control engineering.
  • Ability to review and field verify I&E drawings; experience as an I&E Designer is a plus.

Responsibilities

  • Support construction supervision of project work and inspections.
  • Review work performed by contractors and approve on behalf of the Client.
  • Perform on-site inspections, daily reports, and walk-downs; supervise cutover activities.
  • Track engineered drawing redlines during construction, cutover, and commissioning.
  • Interact with operations to develop control system improvements and document procedures.

Skills

Electrical knowledge
Instrumentation
Construction supervision
Field verification
Drawing redlines

Tools

MS Word
Excel
BlueBeam
Citrix
DWG Viewer

Job description

Description:

TheContractor Constructor Supervisor and Inspector responsibilities include supporting of their projects in the control engineering department, weekly reporting of their work statuses, completing daily inspection reports when on-site construction is active, and walks down and verifies existing drawings.Other specific responsibilities include, but are not limited to:

  • Acts as the owner agent and makes technical decisions on behalf of Client
  • Reviews work performed by construction companies and approves on behalf of Client
  1. Civil Structural work for cable trays and conduits
  2. I&E work
  3. Instrument Installation
  • This role will provide guidance and support for the following control engineering efforts:
  • Construction supervision of project work
  • Inspection of project work
  • Supervise cutover activities
  • Act in the Inspection role during commissioning
  • Track engineered drawing redlines during construction, cutover, and commissioning
  • Understand the process, process equipment, and control equipment including associated electrical and instrumentation related to control systems.Interact with operations to develop control system improvements to reduce potential for safety and environmental impact during normal and upset operating conditions.
  • Support the preparation and utilization of specifications, details, maintenance procedures and documentation improvements for pipeline and related facilities
  • Support the preparation of job plans, construction scope of work, and Request For Proposal providing technical guidance on construction details
  • Field verify existing I&E drawings and creates redlines for as-built purposes.

Qualifications:

The successful candidate will meet the following qualifications:

  • A minimum of 10 years work history as an Electrician or Instrument Technician.Preferably a minimum of 5 years construction supervision with an I&E construction company.
  • Aptitude to review and field verify I&E drawings a must.Experience as an I&E Designer a plus.
  • Working knowledge of the various PHSMA, OSHA and industry standards as it relates to control engineering.
  • Demonstrated expert knowledge in the following Industry Standards
  • NFPA 70 – National Electrical Code
  • NEC Article 250 – Grounding and Bonding
  • NEC Article 392 – Cable Trays
  • API RP 500 - Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class 1, Division 1 and Division 2
  • API RP 540 – Electrical Installations in Petroleum Processing Plants
  • NFPA 496 – Standard for Purged and Pressurized Enclosures for Electrical Equipment
  • NFPA 497 - Recommended Practice for the Classification of Flammable Liquids, Gases, or Vapors, and of Hazardous (Classified) Locations for Electrical Installations in Chemical Process Areas
  • NFPA 70E – Standard for Electrical Safety in the Workplace
  • Ability to quickly learn Enterprise Standards and Specifications relating to I&E design and work
  • STD 0502 Appendix C – Conduit & Cable Schedule
  • ES37 – Basic Requirements for Structural SteelStructures
  • ES38 – Miscellaneous Structural Steel
  • ES75-06 – Electrical Uninterruptible Power Supply (UPS)
  • STD 2000 – Electrical Design
  • STD 2001 – Electrical Construction
  • STD 2009 – Electrical Wires and Cables
  • STD 2010 – Electrical Cable Tray Systems
  • STD 2704 – Structural Steel Construction
  • STD 3006 – Control Valves and Actuators
  • STD 3009 – Safety Instrumented Systems
  • STD 3120 – Instrumentation System Installation
  • STD 3200 – Instrumentation Specification
  • STD 3210 – Flow Instrumentation
  • STD 3220 – Level Instrumentation
  • STD 3230 – Pressure Instrumentation
  • STD 3240 – Temperature Instrumentation
  • Must possess strong organizational skills, excellent written and verbal communication skills and demonstrated proficiency in the use of Microsoft Word, Excel and have the ability to quickly learn new applications
  • Must be a self-starter and able to work both independently and with others in the organization.
  • Must have the ability to perform light work, able to lift minimum of 20 pounds occasionally and be able to reach overhead, stoop, bend and twist while working.

Other Information:

  • Shift: Day
  • Travel: 85%
  • Organization: Engineering
  • Per Diem of $175 per day if travel is outside of the greater Houston area.

The contractors will require a PC from the vendor.Software that should be installed is:

  • Office including word, excel, powerpoint, visio, and outlook
  • BlueBeam (a Revu product)
  • Citrix
  • Syncplicity
  • DWG viewer
  • Zoom
  • TWIC Card is required

Benefits:

-PTO – 108 hrs/year to be accrued weekly; Can be used, rolled over, or paid out

-401(k) – 100% match up to 3% of contributions and 50% match of 4-5% contributions

-Health, Vision, Dental – BlueCrossBlue Shield options

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

I&E Quality Control Inspector - Houston
I&E Quality Control Inspector - Houston

Burrow Global LLC • Houston (TX)

On-site
USD 110,000 - 170,000
I&E Quality Control Inspector - Houston
I&E Quality Control Inspector - Houston

Burrow Global • Houston (TX)

On-site
USD 90,000 - 120,000
I&E Project Engineer (NFPA-70E, NFPA-87, API-500, ISA & IEC)
I&E Project Engineer (NFPA-70E, NFPA-87, API-500, ISA & IEC)

MAV Project Services • Houston (TX)

On-site
USD 90,000 - 130,000
PTO 108 hrs/year
401(k) 100% match up to 3% and 50% on
Health, Vision, Dental
I&E Designer II
I&E Designer II

Airswift • Houston (TX)

On-site
USD 55,000 - 96,000
I&E Designer
I&E Designer

MAV Project Services • Houston (TX)

On-site
USD 90,000 - 130,000
PTO 108 hrs/year
401(k) match
Health, Vision, Dental
Electrical and Instrumentation Designer
Electrical and Instrumentation Designer

Technical Staffing Resources • Texas

On-site
USD 85,000 - 120,000
Electrical and Instrumentation QC Inspector
Electrical and Instrumentation QC Inspector

KODIAK Construction Recruiting & Staffing • Odessa (TX)

On-site
USD 80,000 - 83,000
I&E Quality Control Inspector
I&E Quality Control Inspector

Contractor Service and Fabrication, Inc. • Decatur (AL)

On-site
USD 90,000 - 130,000
Electrical and Instrumentation Designer
Electrical and Instrumentation Designer

The Newtron Group • Meraux (LA)

On-site
USD 85,000 - 120,000
I&E Designer
I&E Designer

Innovative Turnaround Controls • Houston (TX)

On-site
USD 55,000 - 69,000